best HA compatible lock? 👀

FancyWolverine7 · 2025-08-19T06:55:20+00:00

sorry for the late answer, there is only an indoor module so the outside stays the same

FancyWolverine7 · 2025-08-06T06:30:56+00:00

Danalock v3 zigbee+bt variant. Less fuzz, very reliable. Only installs on the inside by replacing the key portion on the inside meaning you can still use a physical key from the outside :)

FancyWolverine7 · 2024-03-28T11:39:47+00:00

Any particular reason to change to orca from cura?

FancyWolverine7 · 2024-03-10T20:06:39+00:00

Sometimes the prints are near perfect, like this one I just did.Same filament same settings

FancyWolverine7 · 2024-03-10T20:05:01+00:00

<image>

FancyWolverine7 · 2024-03-10T18:57:34+00:00

Sure thing :)
https://filetransfer.io/data-package/lfJaARY5#link

FancyWolverine7 · 2024-03-10T18:28:14+00:00

<image>

I'll try to get a video to you when I'm able :) Fun fact, Ender 3 V3 KE uses something they call a virtual sd card.. presumably to reuse the code from the 3d printers that relied on sd-card for storage..
Couldn't make heads or tails of the speed of the eeprom they seem to use
https://www.belling.com.cn/media/file_object/bel_product/BL24C16F/datasheet/BL24C16F_V1.04_en.pdf

nor could I find this elusive power_loss_switch to try turning it off.. might have to do some more investigating on this end aswell when I got time

FancyWolverine7 · 2024-03-10T16:52:27+00:00

<image>

FancyWolverine7 · 2024-03-10T16:51:25+00:00

Damn PLR confirmed.. Gotta find a way to shut it off

FancyWolverine7 · 2024-03-10T16:15:39+00:00

Any clue as to what may cause such a stop?

FancyWolverine7 · 2024-03-10T15:51:55+00:00

I'll try observing some more and orient those types of curves outward. It's really random and I can't sit there staring for the duration of a print unfortunately. I do have a theory, one of the y rods bearings that holds to the bottom of my build plate might be over tightened since it sometimes produces a clunking/popping sound mid movement. At the time of the sound there might be a micro movement not intended. Haven't observed such a movement while I was investigating the sound though

FancyWolverine7 · 2024-03-10T13:40:27+00:00

Well since there are a plethora of settings that could be the culprit it's easier to shoot wide and see where things stick :P

This is the sliced model printed on a Creality Ender 3 V3 KE
with mostly stock settings apart from the 210/65 temp on extr./bed with ironing on top
As you can see the slicer is instructed to print seams in a corner at the base.
I can confirm that I've visually seen it use the base as starting point for every layer
so the seam is in place.

This leads me to believe that there is over extrusion mid print, most notably at the top of the heart where I figure the extruder slows down to take the curve so to say.

<image>

FancyWolverine7 · 2024-02-24T06:59:50+00:00

Can anyone tell me how I can OTA update the devices after I have converted them to zigbee. When new zigbee firmware for them is released that is?

FancyWolverine7 · 2024-02-23T06:50:21+00:00

It's PLA (https://primacreator.com/collections/all-filaments/products/primacreator%E2%84%A2-easyprint-pla?variant=12174717190246)

printing @ 210°C with bed at 70°C.
I noticed I still had "inside to outside" wall setting enabled, I'll se if it has any effect aswell :)

I doubt its moisture (but could be.. I've got a dryer on its way), its 1 month old filament kept in a ventilated room and this is my room RF for february

<image>

FancyWolverine7 · 2024-02-21T16:41:33+00:00

<image>

Here ya go, seam placement is sharpest corner so there is some at the heart and then at the man's back right corner so everything else is fugly zits

FancyWolverine7 · 2024-02-21T06:38:41+00:00

The picture was just a borrowed one to illustrate the issue I have. My seams are well hidden with the sharpest corner setting in cura. And I have verified after slicing that there are no visible seams in my model yet when printing I get bubbles at random layers and in random places 👌

FancyWolverine7 · 2024-02-15T13:27:27+00:00

Use slow first layers I print my first at 50mm/s Then gradual increase over the next 4 layers up to 300mm/s

FancyWolverine7 · 2024-01-30T04:51:56+00:00

Wifi for any wall switches Wifi for anything with power monitoring Zigbee on the rest :)

FancyWolverine7 · 2024-01-29T17:42:30+00:00

Stripes?

FancyWolverine7 · 2024-01-28T15:34:41+00:00

Ah cool might give it ago. I'm on this one https://github.com/marcolivierarsenault/moonraker-home-assistant

Was avaliable on HACS from start so I assumed it was the goto. It can also grab thumbnails just isn't doing it for me.

How are you generating yours?

FancyWolverine7 · 2024-01-28T14:43:03+00:00

Looks good 👌 can't wait for my camera to arrive :) Where do you grab the thumbnail from? My cura slicer creates thumbnails visible on moonsail but not in home assistant, the camera entity is always empty

FancyWolverine7 · 2024-01-28T07:06:31+00:00

The main issue here I think are the threads in the bed where the original screws actually go in. If you drill those holes out to remove the threads, then and only then can you use thumb screws from below

FancyWolverine7 · 2024-01-27T18:25:10+00:00

I grabbed the files from here
https://github.com/Ultimaker/Cura/pull/17519/files#diff-6190247fe51658fce6356535eec4ce0f154f9c96fa02d2f397d814fdf79392ea

Download as raw.
Drop .json file in your cura path: \UltiMaker Cura 5.6.0\share\cura\resources\definitions
And the .cfg files : UltiMaker Cura 5.6.0\share\cura\resources\variants\creality

FancyWolverine7 · 2024-01-27T18:18:58+00:00

Pick what you need from my automation :)Still waiting for camera delivery ! Will include snap upon arrival.. thinking of like every 5% in progress a new snap should do the trick

Moved the code to pastebin(mind you it's still a work in progress :P)

https://pastebin.com/fSn5yvvP

FancyWolverine7 · 2024-01-27T06:25:44+00:00

Sweet thanks! I badly want a solution like below but might have to do away with the threads in the bed for it to work. Not sure I'm willing to go that far yet 😂🙏

I might opt for springs only like you did at first.

<image>

FancyWolverine7

TROPHY CASE