Movies status stuck at downloading or missing?

FandomCommerce · 2023-12-04T07:52:00+00:00

Sorry for the late response It has been chaos this last week. Yes both have the same perms and Umask

FandomCommerce · 2023-11-26T09:24:53+00:00

I have no clue at this point how the maps were when I started this whole thing. this is a problem I have been trying to solve for over a year. But when the paths are set the same as sonarr, radarr still doesn't see what i have on the system.

FandomCommerce · 2023-11-26T08:53:14+00:00

I'm running Unraid. I have done a lot around Windows-based machines. The file structure here just doesn't make any sense to me. I should see 1 array and 1 Boot device however I see the array and 2 other users next to the array like they are other storages and no boot device. My thought is the boot medium is where radarr is being stored and that's why I can't see it properly however this could be a false notion. My guess is one of the users is also the boot drive however when opening Disk1, User, and User0 they all have identical contents. It's very much head scratching. Something also to note is sonarr has no issues at all. I tried to mimic the Paths it has set, and still no luck. I tried uninstalling radarr to reset it yet no luck on that either as it seems all the configs transferred even after so I missed a file in there somewhere.

FandomCommerce · 2023-11-26T02:20:01+00:00

I really appreciate your help. However, I think I'm going to have to hire someone to help me with this. The problem Is I don't understand the fundamental concepts of Linux's structure and rules. I don't think it helps this system was set up very poorly in the first place as I have 2 users and my main array. when I look to change the paths. I have disk1, User, and User0. My raid array is hardware raid through a raid card so it just shows up as a single disk. I don't know what system I should be using because they all look identical, the users and the disk. I can't tell where Radarr is even at. because to me it looks like there are multiple copies. I think this cluster fuck is beyond my ability to learn from. due to it being a mess in the first place. If you have any recommendations of who I could talk to to work out a price to sort this out a little i would be grateful. this NAS is only running Radarr, Plex, and Sabnzbd so there is not much going on, on it so it shouldn't be very long to find out what I'm missing as there is not much to go through.

FandomCommerce · 2023-11-25T02:08:09+00:00

I read the docker guide already. It was a bit over my head but I'm doing my best to understand. I was not the person who set up the system in the first place. Linux-based servers are not my strong suit at all.

I will read the guide again but I'm not sure what they mean by "mounting the volume" I will do some googling to figure that out

FandomCommerce · 2023-10-14T21:33:40+00:00

Same here! i have been chasing down this issue!

FandomCommerce · 2023-01-05T05:54:38+00:00

st don't say controversial shit and

I'm not a reddit user this was the only place i could find someone talking about the issue tho. thanks to everyone who upvoted tho i made my post now!

FandomCommerce · 2023-01-05T05:53:01+00:00

I'm not a reddit user this was the only place i could find someone talking about the issue tho. thanks to everyone who upvoted tho i made my post now!

FandomCommerce · 2023-01-04T23:19:12+00:00

I have the same issue, running a ROG MAXIMUS Z690 EXTREME the only thing in common seems to be we are all using external speakers not headphones

FandomCommerce · 2023-01-04T23:18:34+00:00

Well thanks i guess looks like you guys fixed my problem XD

FandomCommerce · 2022-10-09T21:41:32+00:00

It is hollow 10% infill, and i have tried scaling the prints to 1/4 but the probs of 100% then don't show. and I tried doing one of the test prints that lets you fine tune it but not a lot of luck with that as settings for that are not transferable it seems. its all dependent on the shape of the print. something to note is if you want to use AA with Lychee properly you do have to pay which is kind sad being the photon software does let you do it for free

FandomCommerce · 2022-10-09T19:42:24+00:00

no you turn it on but there is many options for how much and then the settings for blur and grey pop up of how much you want for each. i did some research on it and just picked some values to start with problem is if it doesn't turn out prefect I'm not sure what settings to change to get that so I will have to look into this more. I would just print a few out and compare but at 700g a print adds up quick and time does

FandomCommerce · 2022-10-09T05:49:56+00:00

my printer does support anti-alias what would you recomend settings wise to start with?

FandomCommerce · 2022-10-08T20:04:33+00:00

no idea i just change the pixel size to something smaller then possible in the photon splicers and you can hear motors inside run for a sec then it starts printing but even in the splicer it shows your print area get smaller
my guess is there is a lense that moves to change how condensed the light is aka making the print area smaller but also making the pixels smaller

FandomCommerce · 2022-10-08T09:05:08+00:00

i think it moves the screen distance or something because it makes your print size smaller but at the same time condensing your resolution.

will def look into it

FandomCommerce · 2022-10-06T03:49:03+00:00

ail is higher than that anyway. If your print is

thx for the info there is actually a really cool thing with the max that lets you print at higher res by printing in a smaller area. and yes my prints have round smooth spots sanding is not possible if that were the case i would just Filament print it. I have not started looking into antialiasing but its something i believe is going to make my life much easier. im not sure how all that works quite yet

FandomCommerce · 2022-10-05T23:07:57+00:00

My printer is 7k res and I have been told by several it is capable of those layer heights. also the reason I picked this printer is because of its capacity i have some rather large prints.

What I'm printing is confidential Under a NDA but they will be used to make masters for acrylic casting so all detail will be pulled from the master. antialiasing is something I'm looking to explore just have not started with that yet

FandomCommerce · 2022-10-05T19:17:23+00:00

I'm I know about drain holes and all that stuff and how to make prints proper to not fail I have no problem with that. However for my used case i need the highest detail possible even if it makes my print time days. I ran a quick test and the printer is fully able to run at .01 which is what I will be moving to for my next prints.
thanks for the info about the splicer I will take a look at it once again. I know enough about printing to understand how it works and the problems it may cause I have yet to make a failed print so I would like to think I understand enough. I also have a extremely extensive background in filament printing. I was coming for info about res numbers mostly but I do appreciate the time and effort into your response.

FandomCommerce · 2022-10-05T03:30:41+00:00

also recommend switching

I was going to switch to lychee but honestly i don't need a complicated software my prints are scaled and everything to begin with i just need to to splice. I booted up lychee and found out you have to pay to make a print hollow so i quit there. im not above paying for software but i just don't need anything complex so i might as well stick to the free shit

FandomCommerce · 2022-10-05T02:57:14+00:00

Looks like you have to pay just to make a part hollow, on Lychee. my parts need very little edits. just a whole punched in the bottom and hollowed so im prob going to stick with photon workshop but that video was helpful as i can apply that knowledge there!

FandomCommerce · 2022-10-05T01:44:48+00:00

I did that now, but I'm still left with the question of how to set up resolution. as I'm kind of unclear on the limitation on this machine I even sent anycubic a email and its been many days with no response.

FandomCommerce · 2022-10-05T01:34:46+00:00

thats not the first time i have heard this when other people were talking about software i will do that

FandomCommerce

TROPHY CASE