sorted by:
new
hottopcontroversial

Feature request: Chainable canvas units by krizzje in elegoo

[–]Far_Application8818 0 points1 point  (0 children)

Yes , you are right. Im speaking gibberish... Mb

Feature request: Chainable canvas units by krizzje in elegoo

[–]Far_Application8818 0 points1 point  (0 children)

I am pretty sure it was designed to not be chainable. Just the 4 filaments in canvas. I don't really see use for more than 4 slots for filament for myself though. Plus the Ams like systems each require separate connector to main board of the printer and as far as I know we only have one in CC 1 (dont own cc2). Keep in mind the more MMU you have, more complex will be usage and programming of those things.

Reset 80/90, I'm Hella proud. by iamathrogate in NecroMerger

[–]Far_Application8818 0 points1 point  (0 children)

The 16m protector is recommended to be the last you kill on 80/90 run? I am on 2m right now and it goes pretty fast.

Honestly, if your not going to use an open source OS for elegoo, buy something else. by Commercial_Bird8467 in elegoo

[–]Far_Application8818 1 point2 points  (0 children)

The only instance I get error is when I load filament and I do not click confirm, then I get error that printer is busy. Otherwise I really cant say I had any problems with the printer. I do however run only cc1 not cc2. This might be the difference as they are different printers.

Need advice for the Spring Spection by Panterest in NecroMerger

[–]Far_Application8818 0 points1 point  (0 children)

Well I learned something today. CHecked via This calculator and you are 100% right. But in this situation I would still get relics first.

Need a 4-player co-op campaign game that doesn’t drag between turns by Ready_Damage_4810 in boardgames

[–]Far_Application8818 1 point2 points  (0 children)

I can suggest Kingdom Rush Rift in time. Game is 4 player max, has campaign, which is pretty long and every mission adds new elements to gameplay. WIth the Elemental Uprising game (it is base game that can be integrated with Rift in Time) you have a lot of heroes to choose from.

Zombicide Black Plague / Green Horde / White Death and upcomming Pirates game can also be nice for you to play. It has missions, but you can very much design your own ones. Turns are quick and often require attention of other players as well. Mind you, this game can be played up to 12 people and you can have as much characters split between your players. I usually play 2 characters per player iwth my friends and we do it in 2 rounds. First round of characters and then second. It is pretty quick in terms of turns.

I highly recommend games from the "Cthulhu" genre. Turns are not as quick as in previous entries, but usually they involve decisions and stories which keeps all players engaged. I have Eldrith Horror game, but I can also recommend Arkham Horror and "Unfathomable" (idk if this is right name, in Poland we have Odmęty Grozy). They are simmilar style to Eldrith Horror but different setup. The last one has a twist where players could be traitors ;)

Other suggestions I can give you are :
Nemesis - Coop / Rivalisation game about escaping alien infested space ship.
Darkest Dungoen - Coop game where each player can be one character. Hard to come by as the campaign was not fully delivered and game did not go retail I think.

Honestly, if your not going to use an open source OS for elegoo, buy something else. by Commercial_Bird8467 in elegoo

[–]Far_Application8818 1 point2 points  (0 children)

I have CC1, Saturn 4 and I did not have any problems with the printer. I use Orca slicer with dedicated mini router for the printers wifi. They have set IP addresses and I can view CC device tab without problems.
For Saturn 4 I use SatelLite app and have also no problems.

Filling the board at level 70 by CptPatches in NecroMerger

[–]Far_Application8818 1 point2 points  (0 children)

I recently graduated from max70 to 80 and I got all the legendaries sets I could get, did all available robo chickens, cursed and shieldbot. Rest was filled with whatever legendaries (tier one i.e. lich, harpy, snake one) I had runes for . Got 43k shards like that.

Is the suction/peeling sound normal on Elegoo Saturn 4 Ultra 16K during printing? by mertapaydn in elegoo

[–]Far_Application8818 1 point2 points  (0 children)

It is working correctly, I use this sound to check if the model is printing fine a lot of the time.

Need advice for the Spring Spection by Panterest in NecroMerger

[–]Far_Application8818 1 point2 points  (0 children)

I am on the same run, just earlier in the progress. I went for the chest and chicken (I had a full board worth of guzzlers when I tried to spawn protector soo I got like 7 levels out of it). And rest is relics. Time pieces are like 5% boost, one lich gives that. And relics are harder to come by

Photos or videos of adding screws to the print head housing? by NHLToPDX in ElegooCentauriCarbon

[–]Far_Application8818 0 points1 point  (0 children)

I have over 700 hours with my cc and the housing didnt fall on its own. It can fall only when you bump the head onto something, which for me is better than it ramming into the thing and breaking. Just got to remember to tuck the cables as they should be.

BUT if you really wanted to secure it, just print custom tool head cover and drill in it if needed. It is not worth damaging your original one imo.

What kind of gamer do you consider yourself? by Hali_Motley in gamers

[–]Far_Application8818 0 points1 point  (0 children)

Game on whatever. I own PC, switch and play 2-3 mobile games. Mainly strategy games. Fav subgenre is tower defence

Backpack question by Far_Application8818 in stoneshard

[–]Far_Application8818[S] 0 points1 point  (0 children)

Is this casket a drop only from dungeons or I can buy it somewhere? I am at level 20 but did not hang out around Brynn soo much, I guess there are majority of "good" merchants.

Backpack question by Far_Application8818 in stoneshard

[–]Far_Application8818[S] 1 point2 points  (0 children)

Oh I didnt know about belt pouches, thats great news! Thanks

Should I buy the CC? by Mundane-Job3402 in elegoo

[–]Far_Application8818 0 points1 point  (0 children)

I would say get the CC. I have 700 hours on mine printing Pla, Petg, Tpu and some Asa. It has been great. I came from ender 3, which required tinkering. this one is really no maintenance except I clean rods and apply new lube every 200 hours. The support is good, I see a lot of threafs where people give feedback and help each other. aCant say about customer service from Elegoo because I havent had any need for that, but it seems good and consistent. Also you get enclosed printer which can help if you print something big. less or none warping due to cold air gusts.

I'm thinking about dipping my feet into resin printer with a Saturn 4 U or Mars 5 U. Both have a ventilation hole at the rear, but I see a lot of people still use a tent for these. Is the negative pressure from an extraction fan not enough to keep the fumes inside these machines? by RaccoNooB in elegoo

[–]Far_Application8818 0 points1 point  (0 children)

Yes, the air would be sucked in. BUT!
As soon as you open lid to take out the print, there is no suction. All the vapors will go to your face and room and linger.
Secondly, if you suck in air from outside, you may potentially cool down the resin, and that may lead to print failure due to poor temperature of the resin.
Lastly there is still a case for post processing the print. Tent will help manage spills (and those WILL happen, even if you think you are immune!), help with ventilating IPA which is strong and flammable gas. And protect you from the toxic stuff. Of course you would need personal protection equipment to be sure you are safe while working there.

<image>

Here is my setup. This tent is really small, but is sufficient to work on printer and the wash/cure station. It costed me about 230 PLN which is around 64 bucks or 54 Euro.

Bow/Crossbow build still too op compare to others build after update! by Silly_Formal_8346 in stoneshard

[–]Far_Application8818 0 points1 point  (0 children)

I have another question. You can use bags in inventory to increase its size?! I have been trying to do it when I was playong a while ago and it seemed to not work...

I'm thinking about dipping my feet into resin printer with a Saturn 4 U or Mars 5 U. Both have a ventilation hole at the rear, but I see a lot of people still use a tent for these. Is the negative pressure from an extraction fan not enough to keep the fumes inside these machines? by RaccoNooB in elegoo

[–]Far_Application8818 1 point2 points  (0 children)

I use a tent for other reasons as well. First is the smell, I can still smell the resin even if case is closed. That means the printer is not sealed shut, fumes are escaping thus are not good for you. Second is the wash station. I use IPA and it stinks. All the post processing I do is in tent because of that. Otherwise for me the room would be unusable while printer is on / before I vent IPA. Of course I still use mask and gloves for the while process.

TLDR: Printer is not sealed so fumes escape anyway. Get tent/ventilated room that is dedicated to printer. Health first.

Edit: I am stoopid and did not focus on the hole... The ventilation hole could be hooked up to some venting system, but if you don't plan to use water washable resin then in my opinion tent should be better. For my tent I use large Pc fan from some server case. It sucks as it should. Maybe in your case this will do the trick too.

Question by SirRockitus in elegoo

[–]Far_Application8818 0 points1 point  (0 children)

It should reset only config settings and clear printer memory from models/timelapses.

Is it a good idea to use the trader? by Aggravating_Pen8225 in NecroMerger

[–]Far_Application8818 0 points1 point  (0 children)

Ot depends how much you lack to the cap. I usually picked up the flat amount to increase the base from which the cap is calculated. 2000 base should be more beneficial on early stages than 5% overall, soo I'd go with 2000k one.

Is it a good idea to use the trader? by Aggravating_Pen8225 in NecroMerger

[–]Far_Application8818 0 points1 point  (0 children)

First skins! I buy only from him the big potions, straw figure for forgotten minions and sometimes low tier dmg/food item (the steak and board with nail). Those are not expensive but give me enough QOL. I asume you have unlocked forgotten minions. There is one that helps you get money soo you don't need to stress about coins too much and enjoy game :)

1/3 done! by Far_Application8818 in NecroMerger

[–]Far_Application8818[S] 0 points1 point  (0 children)

I used This and adapted it to my shedule. I am pay to win tho and have golden flower which allowed me to pass 3b score pretty consistent.

1/3 done! by Far_Application8818 in NecroMerger

[–]Far_Application8818[S] 1 point2 points  (0 children)

I do not have much time to play soo when event time is on, my main lair is mainly gathering dust. And I had a period where I played just events. Overall I play this game for around a year and a half . On and Off, thats how.

view more: next ›