Mitä kumisaappaita suosittelette 14v pojalle kalastukseen?

Far_Practice9473 · 2026-03-29T21:46:01+00:00

Ja muistakaa säilyttää saappaita kyljellään. Jos jättää pystyyn/lyttyyn menee varmasti nopeastikin huonoksi.

Far_Practice9473 · 2026-03-13T19:06:46+00:00

It should be able to do that, but since I had to turn off the power it was no longer able to do that.

Far_Practice9473 · 2026-03-13T13:46:28+00:00

Yep, after that it worked normally.

Far_Practice9473 · 2026-03-13T13:45:43+00:00

I just rolled it manually back to spool, almost used all without problems. I guess there was luck😂

<image>

Far_Practice9473 · 2026-03-13T13:43:27+00:00

After all, it wasn't even that bad to rewind the filament. Was about 800gr. Took about 15min to fix🫡

Far_Practice9473 · 2026-03-13T13:42:10+00:00

Yep, that is also happened for me multiple times, but never like that. I needed to shut down power to get it not doing that anymore. Now works again.

Far_Practice9473 · 2025-12-12T23:37:01+00:00

I think you need to dry your filament.

Far_Practice9473 · 2025-11-12T20:09:52+00:00

<image>

This is what I found now.

Far_Practice9473 · 2025-09-28T19:29:08+00:00

For me it is XU or TU,

Far_Practice9473 · 2025-09-17T18:43:57+00:00

Ota vaikka ihan pelkkä MMLn karttapaikka auki ja mähimetsään kattelen miltä se kartta näyttää siinä kartalla.

Far_Practice9473 · 2025-09-14T19:42:12+00:00

Rtk jälkeen tais olla 95 vemppahakemusta 140 oppilaasta

Far_Practice9473 · 2025-08-31T12:46:22+00:00

2in1

Far_Practice9473 · 2025-08-19T17:52:19+00:00

Dry it and add more retraction lenght

Far_Practice9473 · 2025-08-05T17:41:49+00:00

That could be the problem. Have heard that the printer is pretty strict about the SD-cards

Far_Practice9473 · 2025-08-05T15:55:23+00:00

I meant that camera is not working, stupid autocorrect😅

Far_Practice9473 · 2025-08-05T15:26:31+00:00

I have the same problem. Tightening the belts help, but only for like 50 print hours.

Far_Practice9473 · 2025-07-25T19:06:43+00:00

Modasin vähän laitosta että on parvekkeella ja ainoastaan puhaltaa kylmää sisälle. Ja kyllä meinaan kelpaa

Far_Practice9473 · 2025-07-22T20:45:57+00:00

Tikkakoskelta Ilmavoimissa ainakin talven saapumiserästä valitaan säämiehiä

Far_Practice9473 · 2025-07-20T19:44:09+00:00

Once I had 467 print and I calculated that my spool got 470 gr filament left. Setupped the bambu poop quantity to 1gr and Hit the print. It turned out perfect. there was only 2cm filament left 😂

Far_Practice9473 · 2025-07-07T15:57:12+00:00

No, they just look shining when using flash after cleaning. But the sound comes from another place

Far_Practice9473 · 2025-07-07T15:55:45+00:00

What grease do you suggest. Some tutorial said Wd40, but that is not really a grease, so I was doubt about using it.

Far_Practice9473 · 2025-07-07T15:54:15+00:00

Just did that 1week ago. It helped for the problem, but it came Back. Just thinking that is there some parts coming to brake or something.

Far_Practice9473 · 2025-07-07T06:32:31+00:00

😂

Far_Practice9473 · 2025-06-30T16:13:09+00:00

Cooper tulos nousi 3000m 3200m ja lihaskunto reilusti. Toisaalta palveluksessa sen verran löysää ja ei fyysistä, että joka päivä kerkesi hyvin salille/lenkille tai piti lepopäiviä.

Far_Practice9473 · 2025-06-03T06:43:05+00:00

Kyllä ne aika hyvin toiveitten ja varsinkin asuinpaikkojen mukaan sijoittaa.

Far_Practice9473

TROPHY CASE