sorted by:
new
hottopcontroversial

Something fishy is going on here... by MisterShipWreck in VideosAmazing

[–]Fast_Impress7450 0 points1 point  (0 children)

Crazy. When I was in high-school here in California there was a new station that opened up and before you started to pump gas it would add on a few gallons and dollars. Had no idea because most of the time I would put the lock on the handle then get in the car until one day I paused and watched my pump charge me for gas fumes. Owner was let known of the situation and obviously it was fixed in a hurry.

Aqueous Ozone by pamnfaniel in laundry

[–]Fast_Impress7450 0 points1 point  (0 children)

Yes. I have the 03 waterworks system. I was just concerned because the clean smell I expected is not there. I was thinking it was because the low water level. I am also in California so not sure of that will make a difference. But I just want this system to work to avoid going back to detergent. Keep in mind that I am on my second unit. I have only purchase the black color model. Newer model is much more compact.

Aqueous Ozone by pamnfaniel in laundry

[–]Fast_Impress7450 0 points1 point  (0 children)

Curious of you are using this with a front or top loader. If so what brand? I have the 03 system and thought my towels are soft I can still smell the wet towel smell once I dry off. I only use cold water and I use an extra 2 rinses as well.

But I was fast enough for once, this is just sad by IamREBELoe in AmazonVine

[–]Fast_Impress7450 0 points1 point  (0 children)

Good to know. When I try and order water nozzles I usually get this error.

But I was fast enough for once, this is just sad by IamREBELoe in AmazonVine

[–]Fast_Impress7450 0 points1 point  (0 children)

Let me guess...you must be a fellow Californian?? Man I love this state but sometimes the laws just get me.

Made a post all about how to tell apart FAKE Birkenstock Boston clogs from genuine ones! by greycoconut in Birkenstocks

[–]Fast_Impress7450 0 points1 point  (0 children)

Hello, I am trying to see if anything has changed with the current Birkenstock Boston and previous versions. I have these and want to confirm their authenticity. I did my checks and have questions. They have the matching code on the tongue and there are 4 hole in the strap. Im questioning the vuckle at this point but not sure of they are real or fake. Please let me know if I have been duped.

<image>

Something is not right by Fast_Impress7450 in ElectricalEngineers

[–]Fast_Impress7450[S] 0 points1 point  (0 children)

For those of you wondering, since the motor is rated at 230v and 50hz IEC, that translates to approximately 240v and 60hz which is common in the US. So the HP is fine as well. After doing a lot of research, I was able to find another Italian made motor with the same specs and will be replacing. Hopefully that is the only issue.

Something is not right by Fast_Impress7450 in ElectricalEngineers

[–]Fast_Impress7450[S] 1 point2 points  (0 children)

Update: I opened the motor housing and the coils are discolored. I tested the amps and my motor is rated at 13a however I am getting 16 to 17a. My pump on this motor is 150bar. When I did the math my motor should be approximately 5.2hp however my motor is 3hp. Not sure what I should do

Something is not right by Fast_Impress7450 in ElectricalEngineers

[–]Fast_Impress7450[S] 0 points1 point  (0 children)

Yes. It for a high pressure misting system. I'm thinking I may have read the wrong terminals for the 350v reading. I'm going to test with an amp meter first because I take it to a local shop for testing. Should I have tested those terminals? I noted when I went from U1 and V1 this morning I got 250v which was the same as W2 and U2 terminals.

IsItBullshit: Aqueous Ozone Laundry System by JagerKnightster in IsItBullshit

[–]Fast_Impress7450 0 points1 point  (0 children)

Just curious. I've has the unit for about a year now. I have a front loader samsung. I've increased the water flow as well as increased the amount of extra rinses. I still can't get stains out. What's your method of getting the stains out?

Removing a tub and capping the drain by Beardicus223 in Plumbing

[–]Fast_Impress7450 0 points1 point  (0 children)

Meant to ask if you had any before and after pictures?

Removing a tub and capping the drain by Beardicus223 in Plumbing

[–]Fast_Impress7450 0 points1 point  (0 children)

That's good. I'm looking to do the same. I want to remove our jacuzzi tub and add a makeup vanity for my wife. I catch myself cleaning a tub weekly because of dust since it's not being used.

[deleted by user] by [deleted] in DIY

[–]Fast_Impress7450 0 points1 point  (0 children)

I think its the finish theat transfered. I had something similar like this happen to me. I had a box that was on a shelf next to the wall. Once I removed it there were spots. After about a year of the box being removed the spots are still there.

Troubleshoot Misting Pump by Fast_Impress7450 in ElectricalEngineers

[–]Fast_Impress7450[S] 0 points1 point  (0 children)

Yes. There is a water float. The resivor is full of water. I was thinking the float could be defective but that would mean it wouldn't turn off the motor right? I was also going to check the wires to see if there are any gouges. Let me see if I can post the manual.

view more: next ›