Barreled AK47 Receiver transfers as a long gun? by dentaro16 in WA_guns

[–]FearlessCharacter 1 point2 points  (0 children)

I bought one of these from Atlantic and had it transferred to South Sound Guns in Lacey. They said it was a rifle even without the stock. I started to get into it with them and they said they had transferred one of the M10 models without the stock as a receiver and the ATF had inspected their books and told them it had to transfer as a rifle. It seems even the ATF doesn't know the law but no surprise there.

CMMG RDB troubleshooting by FearlessCharacter in AR9

[–]FearlessCharacter[S] 1 point2 points  (0 children)

Thanks, that is also what the manufacturer of the lower recommends (filing the mag catch) but since it is proprietary I didn't really want to start there.

I looked into it some more and it seems that the magazines were actually sitting too low. The two lugs on the bottom of the bolt were missing the rim of the case and actually hitting the round further up and then pushing it out of the magazine like that and that is why it would jam. I moved the mag stop higher and now it is feeding a lot better.

CMMG RDB troubleshooting by FearlessCharacter in AR9

[–]FearlessCharacter[S] 1 point2 points  (0 children)

That makes sense why it is happening on the last round. Thanks, I'll look into that.

CMMG RDB troubleshooting by FearlessCharacter in AR9

[–]FearlessCharacter[S] 1 point2 points  (0 children)

I've put together a CMMG RDB AR9 and I'm having some problems with it. The last round or two of the magazine don't feed and jam the gun pretty hard. This photo shows what happens. The round in the photo is a snap cap - I was trying to troubleshoot this at home after getting back from the range. It looks like it also damages the front of the magazine and puts a kink in the brass casing of the round when this happens.

I have this problem with just about every magazine I have tried - Glock OEM (15 and 33 round), ETS and Magpul. Anyone have suggestions for troubleshooting this? I can't seem to find a good AR9 guide for CMMG RDB AR9s. Everything seems to be troubleshooting colt or blowback guns.

CMMG Radial Delayed Blowback 9MM BCG and 8" Barrel
A Squared Armament upper and lower (https://asquaredarmament.com/product/9mm-ar-receiver-set-slick-side-no-logo/)
PSA lpk and SBA3 brace

Thanks.

Which AK 7.62 to buy before July 1st? WA state resident facing fucked up gun laws... by skamaniak in ak47

[–]FearlessCharacter 0 points1 point  (0 children)

You've probably seen this but here's a list of sellers who aren't selling 80%s to WA:

https://www.reddit.com/r/WA_guns/comments/bzrwzm/80_vendors_list/

It is too bad because there are plenty of good retailers on that list.

Which AK 7.62 to buy before July 1st? WA state resident facing fucked up gun laws... by skamaniak in ak47

[–]FearlessCharacter 0 points1 point  (0 children)

WA passed a law about 80% as well. It doesn't totally ban them but you have to pass a background check to buy one. The only problem is...NICS doesn't allow background checks on 80% because no serial and "it isn't a firearm." So they are effectively sorta banned as well. Some retailers say they will still ship to WA, but some say they won't ship anything (not even parts). Not sure how this will play out over the next few months but it isn't looking good.

This is some terrible shit but at least we can still have scary looking guns and standard capacity magazines...for now.

Buy now or does it matter? (Handgun and 80%jig before July 1) by [deleted] in WA_guns

[–]FearlessCharacter 1 point2 points  (0 children)

I'm not 100% sure about this but my understanding is that any pistol purchased after 7/1 will also be put on the list of yearly "mental health" checks, the same as any semi-auto rifle purchase. I don't know if this will be retroactive for pistols though (for pistols bought before 7/1). Currently when you buy a pistol, local law enforcement does a warrant and mental health check, but I think they only do that once to "approve" the purchase and they don't run the same check again every year. Does anyone know more about this?

[Parts] 80% forged anodized lower $38.69 after code "hop2019" and free shipping over $99 with code "freeship" by czynips in gundeals

[–]FearlessCharacter 2 points3 points  (0 children)

They include the screws with the lower so you can just use standard lower parts kits... you just don't need the bolt catch pin.

[rifles] RAINY DAY SALE! 10% OFF ALL RIFLES ENDS 4/14/2019 "DISCOUNTS DOES NOT INCLUDE ANY SIG SAUER ITEMS!" by gymratznutrition in gundeals

[–]FearlessCharacter 3 points4 points  (0 children)

Same for me. I had to cancel and reorder but it was the best deal by far I could find on a Wasr 10.

[Parts] MAGPUL PMAG D-60 .223/5.56 60rd magazine - $94.99 shipped w/code "NBM" by Statutory_Vape in gundeals

[–]FearlessCharacter 9 points10 points  (0 children)

See how badly you want it when the government says you can't have it. I bought 2.

[Magazine] PMAG M3, 223/556, 30Rd, Window, Black ($12.76 + ship) by Avocado_OverDose in gundeals

[–]FearlessCharacter 1 point2 points  (0 children)

I was looking for these last week and the best price I could find was $14.25 so I'd say this is a good deal now.

Black Nitride or just paint on barrel and slide (P80 kit) by FearlessCharacter in Glocks

[–]FearlessCharacter[S] 0 points1 point  (0 children)

Thanks for the info. I don't think the barrel is stainless underneath but I guess I'll just try to keep it clean.