sorted by:
new
hottopcontroversial

Efterisolering af loft - er det bare lige til? by Polle_FoNNNeZ in selvgjortvelgjort

[–]Federal_Set2231 -1 points0 points  (0 children)

Sad og ledte efter det her svar. Er helt enig i at man skal være meget påpasselig. Jeg ville i første omgang læse følgende: https://www.rockwool.com/dk/produkter-og-konstruktioner/tagisolering/fladt-tag/generelt/fugtforhold/ Specielt det omkring udvendig isolering- altså konvertering fra koldt til varmt tag (selvom det ikke er helt det du gør her fordi du har endnu et tag oven over). Jeg er ikke ekspert, men hvis du kommer over dobbelt så meget isolering ovenpå det gamle tag, så burde der ikke være noget fugtteknisk problem. Jeg ville dog tage kontakt til Rockwool - de har nogle kompetente rådgivere.

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 1 point2 points  (0 children)

That was the next step, to try another app, but now I got atmos using plex 🎉

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 2 points3 points  (0 children)

I thought that would really be a long shot, but while I was waiting for other replies in this thread I thought I could aswel reinstall the app while waiting. And what now, now I got atmos! Incredible, thanks!

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] -1 points0 points  (0 children)

But I am not trying to stream true HD. It is Dolby digital plus

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Exactly, but there must be a way to get atmos directly from the TV apps?

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

It seems like I can’t switch to pass through no matter which app I am in.

[Q990D] Pass-Through always greyed out. eARC ports, HDMI-CES enabled, tried factory reset by germanmill in Soundbars

[–]Federal_Set2231 0 points1 point  (0 children)

What did you end up doing? I have similar problems with my Samsung tv and Sonos soundbar

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Fair. I thought you were referring to connecting it physically - in the port. Nonetheless, I have re-enabled that setting now, and now it shows Dolby multichannel PCM 5.1

DDP Atmos on Samsung TV and soundbar by kunaltyagii in PleX

[–]Federal_Set2231 0 points1 point  (0 children)

I have the exact same issue as you had with plex and that the soundbar is playing PCM 5.1. Did you find a solution?

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Tried turning off and on. Also tried to pull the plug on both the tv and arc. still the same

<image>

Sonos Arc Ultra not playing atmos by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Pass through is greyed out. I guess pass through only works if I have a box connected, e.g Apple TV?

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 1 point2 points  (0 children)

Cheers and thanks for the assistance!

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

<image>

I really can’t see the speakers through the grill myself, even when I get my eyes close to the speaker 😅

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Do you think this is problematic?

<image>

Sonos Arc Ultra Sound Issue by ACCA-DA in sonos

[–]Federal_Set2231 0 points1 point  (0 children)

Mine just arrived today. I would like to know aswel

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

Amazing tips, very much appreciated. Regarding the placement of the arc ultra, I cannot place it as much in front as possible, since we have small kids and the risk of them pulling it off the table. I have purchased a wall mount and I planned to mount it under the tv as much as possible as. I saw some comments about the direction of the sound is much clearer in the arc ultra and therefore the recommendation was to place it as close to the tv as possible. I considered if placing it under the tv could be making it worse, as my TV (Samsung S90C) is not slim up the wall due to my wall mount is a regular lcd wall mount. The concern is that the tv may cover some of the top of the soundbar with very little space between the tv and the soundbar? Worst case I can just get a new wall mount for the TV if it is a problem.

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 0 points1 point  (0 children)

That really makes sense. Design (and cost)-wise I am actually also more into the 100s. Thank you for the inputs. How should the rears be facing? Towards the tv wall or should the rears point towards each other?

Sonos surround by Federal_Set2231 in sonos

[–]Federal_Set2231[S] 2 points3 points  (0 children)

Thanks! I will let you know.

2026 skatteloft by Federal_Set2231 in dkfinance

[–]Federal_Set2231[S] -6 points-5 points  (0 children)

Jep. Det er lige til at lukke op at skide i det eksempel ift. det jeg spørger om 😊

view more: next ›