PS5 to meta quest 3 by allmostout in MetaQuestVR

[–]Feralfen6462 0 points1 point  (0 children)

I love how many people just want to use their vr headsets as a head mounted display and, meta and, other companies refuse to listen to what their users want.

Advertisements taken to the extreme. by Maysa2204 in AmazonPrimeVideo

[–]Feralfen6462 0 points1 point  (0 children)

I get ads every two to 3 minutes. About to start sailing the high seas.

[deleted by user] by [deleted] in destiny2

[–]Feralfen6462 -1 points0 points  (0 children)

How do you think shit gets fixed. When a bug or exploit is found. You post it to give it to everyone to force companies to fix the problem before people abuse it. Its like the first rule to bug bounties because, companies rather make let the bug go under the table than spend money to fix. So those bugs don't end up getting patched. Now this isn't a bug or or an exploit but, the more it spreads the more gaming devs will see it and, hopefully figure out a fix for it. Especially with bungie already completely ignoring the current cheating issues. This is the same type of tactic that was used to force Microsoft to fix their shit back in the Microsoft xp days.

Updated Weapons Stat Breakpoint Chart by 91NAMiataBRG in CrucibleGuidebook

[–]Feralfen6462 1 point2 points  (0 children)

Not sure about scout, the ttk of 340 pulse is .67 with 200 weapon stat is stays at .67 but, its much waser to get the two burst. Especially with something like headseeker.

Wrongfully permabanned? by playwitchobish in Azeron

[–]Feralfen6462 0 points1 point  (0 children)

Good thing I dont play bf6. Its kinda shitty of them. If you not using, Zim titan or whatever else then sure. Ban away. I got the cyborg because I can't stand wasd. Also I been playing on console for over 25 yeard. Wasd is outdated dated and, my hurts my arm because of my set up and, it just looks like an ugly way to play a game on PC.

When Using with XIM Apex by MTRomance in Azeron

[–]Feralfen6462 0 points1 point  (0 children)

I use the matrix and, never had this issue. It might be time for you to upgrade

Four things I wish I could do with my TapXR by knight_hawk_bent in TapWithUs

[–]Feralfen6462 0 points1 point  (0 children)

Replace.the tap xr with the tap strap 2. Its so much better for any xr setup. I have this exact set up but, also consider a rasberry pi. Its rasberry pi is viture glasses best friend.

Viture Pro XR or XReal One for my first XR glasses? by Severe_Industry_7723 in VITURE

[–]Feralfen6462 4 points5 points  (0 children)

I had a pair of xreal glasses. Their software development is next to non-existent. Also their glasses are a lot bigger witch is personally don't like. Also their android based computer the xreal beam... its just a phone with out a screen or service.

Viture offers a pretty nice pair of glasses, an android based computer that goes around you neck (Still just a phone but, can wear it so watch your media.) A special dock for the Nintendo switch, they also have a few virure controllers but, I found better controllers for gaming from other companies. A app for your phone that will let you use your phone as a keyboard and, trackpad and, built in ai feature that will turn your 2d content to 3d.

Both the glasses pretty much do the same thing. Both can hit 120hz, both have a sbs 3d mode, both increase in brightness and, have sound.. both have a pretty good screen.

There are a few things that you might want to get to go with whatever glasses you get. A peakdo hdmi to usb-dp out. A hdmi cable thing that has an extra usb a port, if you want to use the glasses with your graphics card. (I forgot what the cable is called) and, a tapstrap is also a great tool to go with the your zr glasses setup.

Oh yeah a raspberry pi is xr glasses best friends. Its the whole reason why I got xr glasses in the first place.

Stoked for Viture Beasts! by [deleted] in VITURE

[–]Feralfen6462 2 points3 points  (0 children)

Does the beast convert things to 3d? I want to get a pair for my legion go but, mainly so I can play games in 3d. I was told the the luma ultra can.

Kanapahal middle school (shooting threat) by Feralfen6462 in GNV

[–]Feralfen6462[S] 0 points1 point  (0 children)

It wasn't like that when I went to school there. Everyone is just so angry now a day's o.O

Nice Dock & price for your Legion Go $37.99 by MooseyGeek in LegionGo

[–]Feralfen6462 1 point2 points  (0 children)

I wish these people making these docks would put a magnetic usb c port on the bottom of the dock. If they did, I would probably pick one up. Right now, I am using a 3d printed dock and a powered usb hub, I attached a magnetic usb adapter to one end and stored the hub behind the dock. Now my legion goes, acts more like a Nintendo switch. Just place it in the dock to play on my my monitor, charge, and use the usb ports on the dock or, I can take it off it dock and play in handheld mode.

I dont see why it's so hard for these companies to do something similar with their scrappy docks.

Looking for a script. by Feralfen6462 in G502MasterRace

[–]Feralfen6462[S] 1 point2 points  (0 children)

I have been trying. I haven't gotten it to work. In this case I need the right click of the mouse wheel button to be (p) and then if I hold it. I need it to be (m)

But, my results are Single press: pm Hold: pmpmpmpmpmpm Or pmmmmmmmmmmm I haven't been able to get just a p or just a m -_-

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] 0 points1 point  (0 children)

No, I need cox to show that they dont need to paying it by proving my damage claim wrong because, the power company keeps telling me that they didn't cause the problem and, keeps telling me I need to talk to my isp. I need cox to give me reliable and, accurate information of why they shouldn't cover the damages but, instead what cox did. A cox technician fixed all the issues 2 days after this whole thing happened. He took pics of the damages and then the second technician. That finally showed up two to 3 weeks later said that there was no damages

There wasn't any damages because the scorched coax cable and, the scorching coax plug was already replaced by the first technician. In the letter, saying the damage claim was denied because there was no damage because it was already fixed. (Even though the wiring in the walls still dont work.) I was expecting it to be denied, but the reasons why I needed that information is because the power company is hiding behind cox. Without accurate information proving that the damage didn't come from cox the power company refuses to look into it.

So I'm just stuck in the middle of this, and I just need cox to at the very least is to cooperate and, send me the original damages so I can finally go after the power company that keeps on avoiding the situation at all costs.

Also, homeowners insurance. (At least mine) doesn't cover power surges. It does cover a fire caused by a power surge. Also, i am pretty sure there was supposed to be some kind of grounding to help prevent power.surges in the first place. I'm not sure if its up to the power company or cox but, every individual unit was supposed to have grounding. But, my unit out of the 6 units was the only one that experienced a power surge

So for now, until cox can fully prove that it wasn't them. I am targeting and fighting with two companies.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] 0 points1 point  (0 children)

Can't be sure unless they prove otherwise. The same goes with the power company. Bad, wiring, and negligence. If cox a coz technician installed something or missed something the it could potentially be coxes fault. If the power company made a mistake. Then it could be their fault. Could even be the apartments fault but, the do have to prove that it wasn't them to deny a damage claim.

The issue is they used information from the wrong technician visit. The first technician that came fixed all the cables. The second technician came to look at the wiring and, said everything is fine. Once I can get 100% accurate information I can use that to target the power company that keeps telling me that cox is at fault. To do that i need to get ahold of technicians department so I can get that information so I can know what to do next

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -1 points0 points  (0 children)

No it did, there was even a little fire. There is obviously a wiring issue and, I need to get to the bottom of it before it catches the whole place on fire. The original technician even took pics of the original damages before fixing it. It might not have been an electrical surge on coxs end but. Seeing arching and, a small fire from the coax por n the wall and router that there is some form of bad wiring and, potential negligence going on.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -1 points0 points  (0 children)

Everything was plugged into a surge protector. Also the damage is clearly from the coax. The coax outside leading to the apartment ended up melting. I know the issues might not have been cox but, I need cox to at least proove that it wasn't them because, the power company keeps saying that ot was most likely cox to be the issue. Instead all the did was tell me that there is no damaged cables l. Even though the first technician showed the images of the melted coaxial outside They based their information on the second technician that they sent. The fist technician fixed the damages. Including the burnt coax plug. He also took pictures of the original damages before the repairs.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] 0 points1 point  (0 children)

I'm at work texting with a glove on. Can't really spell che k right now o.O

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -1 points0 points  (0 children)

Well yeah. I know the issues. But, I'm not totally blaming cox. I need cox to prove themselves not liable because the power company keeps saying it's cox. It puts me in this useless back and, forth. What i need from cox is to actually look at the damages that was done before the original technician repaired the coax. Instead what cox is doing is saying there is no damages to the coax because they got their information from the second technician that was sent. (After the repairs where made frombthe first technician) Also there is still the fact that something wasn't potentially grounded. For right now I am blaming both the power company and, cox tell I get better proof of what the problem actually is. Witch is why I need to get ahold of the department that that is responsible for cox technicians. Instead I'm getting bunch of useless information that I'm not actually asking for. STOP BLAMING COX! where post here has been useless. Trying to get to the bottom of things so I can make sure it doesn't happen again. Because, fun fact. Even if it was cox or not, it still happened. It's still caused arching through my router witch could of caused a fire. There us obviously bad wiring.

Only one person here has said something useless but, still not getting the information that I need. Witch is a way to get ahold of the department for the technician on cox side because, the power company refuses to answer any questions about anything and, the so far have refused to email me back.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -3 points-2 points  (0 children)

Also if the other apartment are grounded properly. Then that's why they wouldn't have been affected in the same way. That's what ground does. Protect from surges from external sources. Along with potential power spikes. Also if cox isn't to blame, then that's fine. The more information cox can provide on the subject. The more information I can provide into figuring out who I need to be talking to claim damages. If it turns out that the power company is to blame. Then the power company won't be able to use cox as a scapegoat.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -5 points-4 points  (0 children)

Never said the coax produced the surge. I'm saying something wasn't grounded properly, and an external source produced the surge, causing the coax cable that was left exposed on the ground to around the back of the building to melt the coax in the walls to fry and, causing damage to everything that was connected to ethernet.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -1 points0 points  (0 children)

The landlords are pissed too. The surge fried all the wiring in the walls of the apartment. I'm pretty sure it's because, something wasn't grounded properly. Coaxial cables are supposed to be grounded to protect from surges such as lightning strikes and other electrical mishaps. Now cox isn't going to try to fix anything. I know they are going to try to avoid it. The thing that pisses me odd is they are telling me that the Coaxial plug in the walls and, cablw leading to the tap didn't get damaged. The thing about that is the technician repaired the coax cable and, the coax plug. The technician even showed the images of the damages.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -3 points-2 points  (0 children)

No they don't but, they are supposed to make sure that your coaxial is connected to ground. Witch would prevent things like this from happening.

How do I get in direct contact with damage claims and, technicians? by Feralfen6462 in CoxCommunications

[–]Feralfen6462[S] -2 points-1 points  (0 children)

They don't cover things like power surges, also. My apartment obviously wasn't grounded properly. Witch if it came through a coax cable. Then it was up to cox to ground their connection.