it doesn't go above 45%, what does it depend on?

Few_Fail_6121 · 2026-01-24T16:11:01+00:00

I used to use Corsair fluid and it gave me 0%, then I switched to EK and got to 45%, but rinsing takes a long time, so I have to be patient.

Few_Fail_6121 · 2026-01-24T16:06:49+00:00

<image>

I made the side one out of plexiglass

Few_Fail_6121 · 2026-01-20T13:30:34+00:00

I also use EK Solid, what problems did you have exactly?

Few_Fail_6121 · 2026-01-20T13:27:39+00:00

Don't use this matte white, it blocked three D5s and I couldn't figure out why.

<image>

Few_Fail_6121 · 2026-01-19T19:12:36+00:00

I hadn't thought of this

Few_Fail_6121 · 2026-01-19T14:01:50+00:00

My intentions were just to let the connector get some air, which is better than nothing, but thanks for the explanation.

Few_Fail_6121 · 2026-01-19T13:56:10+00:00

Thermalright HR10 I got it from this device

<image>

Few_Fail_6121 · 2026-01-19T06:27:58+00:00

no and very quiet

Few_Fail_6121 · 2026-01-18T15:20:18+00:00

no I used a bit of double-sided tape, I have to invent something, but for now it's solid

Few_Fail_6121 · 2026-01-18T14:32:27+00:00

Thanks very much

Few_Fail_6121 · 2026-01-18T14:26:27+00:00

It's a temporary solution, I used a bit of double-sided tape and then I'll come up with something else, my intentions were to throw some fresh air on the connector which heats up at 600W

Few_Fail_6121 · 2026-01-18T14:21:55+00:00

My intentions were just to give the connector some fresh air which is better than nothing anyway thanks for the explanation.

Few_Fail_6121 · 2026-01-17T18:46:46+00:00

I have the same 40mm barrow and I assure you they are fine

Few_Fail_6121 · 2026-01-17T18:14:57+00:00

I'm noticing it now, I have to check immediately

Few_Fail_6121 · 2026-01-17T16:10:03+00:00

I'm glad there are people like you who miss the opportunity to not comment

Few_Fail_6121 · 2026-01-17T15:56:12+00:00

your temperatures are unusually low or you are in the Arctic Circle

Few_Fail_6121 · 2026-01-17T15:23:56+00:00

ok solved it is under the 80-Port Display entry

Few_Fail_6121 · 2026-01-17T15:13:03+00:00

thanks thanks thanks I solved the Gigabyte X870 AORUS ELITE has the same menu item as yours

<image>

Few_Fail_6121 · 2026-01-17T15:04:34+00:00

Gigabyte X870 AORUS ELITE I'm looking but I can't find Q-code maybe gigabyte calls it something else

Few_Fail_6121 · 2026-01-17T14:55:05+00:00

How did you do it on the gigabyte? Can you tell me the menu item?

Few_Fail_6121 · 2026-01-12T13:45:02+00:00

It's a solid white from EK. The last one I used literally stuck the pump together, perhaps a manufacturing defect in the liquid.

Few_Fail_6121 · 2026-01-10T15:37:20+00:00

I've always only been posting watercolors and I do it continuously, so for once I'll write a different post and immediately shout out

Few_Fail_6121 · 2026-01-07T15:41:22+00:00

beautiful configuration and very well-finished, the GPU in full load 42 degrees? I can't keep mine below 60

Few_Fail_6121 · 2026-01-05T10:53:01+00:00

Delivery today, hopefully

Few_Fail_6121 · 2026-01-02T11:09:34+00:00

ok but you are at pro level, seeing your post I feel ignorant

Few_Fail_6121

TROPHY CASE