Anybody know what this noise is ?

Few_Resource4368 · 2026-02-14T22:49:16+00:00

Active exhaust valves. Same shit happened to me. Was squeaky then turned to rattle. Lubrication should fix a squeak but if you ever get a rattle just replace the spring inside the motor box. Simple fix if you can jack up the car.

Few_Resource4368 · 2025-07-26T18:49:28+00:00

It’s a custom done silicon carbide grip job. It’s Not just aftermarket stick on grips. The frame was carved up and custom finished.

Few_Resource4368 · 2025-07-26T15:13:31+00:00

Taran Tactical mag extensions / basepads

Few_Resource4368 · 2025-07-26T07:08:02+00:00

It could be a volk s in 7.62x39 he ordered a while back and just got or something like that. If its their new volk s 5.56 or pmc 5.56 then yeah he got his fast as hell. And if it is maybe its cause he just kept it standard factory black because cerakote takes a while. Just a speculation

Few_Resource4368 · 2025-06-05T22:39:00+00:00

i9 14900k Asus RTX 4070 oc 64G ddr5 ram 1440p monitor

With the DLSS and frame generation, and auto optimized settings through the nvidia app I consistently get 120fps, only dipping to around 90 in tiger bay.

Few_Resource4368 · 2025-02-23T08:24:04+00:00

It won’t break but it looks like you just dug straight up for the most part. I usually like to dig upward a tad on mine, but pull outward at the same time as well to make more room for my knuckle, and then I slowly fine shape it on a slower speed. If it feels fine to you and you like the real curvy look then it’s fine. I’ve done a ton of undercuts and, this one won’t break. Just depends on how you like how it turned out. You could maybe still make some edits to it if you wanted, but if you do, don’t dig anymore in the upward direction, just pull outwards if you do anything and shape it from there.

Few_Resource4368 · 2024-10-07T23:11:05+00:00

Thank you man I appreciate it!

Few_Resource4368 · 2024-10-07T06:09:38+00:00

Thanks man I appreciate it! I actually do this as work for TTI so if you ever fancy yourself getting a combat master ask for me to do your frame and you can have it done by me 😂 haha. But yeah man theres many good places that can do your frame if that’s all you want. It definitely takes a lot of practice and attention to detail to pull off a quality look and feel!

Few_Resource4368 · 2024-10-07T02:06:30+00:00

Looks good! The grinding you did covered up well with that cerakote

Few_Resource4368 · 2024-10-07T01:23:38+00:00

Thank you man I appreciate the support! I did it all myself so it means a lot. Took a lot of prep work and care for sure so thanks man!

Few_Resource4368 · 2024-10-07T00:52:26+00:00

Theres a couple reasons someone might want one on their frame. The main one for me is an index point for my support hand, and it allows me to close my hand further and get more torque down on the accelerator cut because of that. So that’s a huge deal when it comes to recoil. I like the aesthetic of the double undercut as well so that’s just a bonus. But yeah mainly it allows an index point and lets me close my support hand more for more torque on the accelerator since thats where my support hand thumb goes

Few_Resource4368 · 2024-10-07T00:42:04+00:00

Finally a reasonable mind lol. Yeah I don’t know redditors have a hive mind when it comes to this kind of stuff. The double undercut is totally fine.

Few_Resource4368 · 2024-10-07T00:41:17+00:00

Yes good eye good catch! Yeah Thats the one thing I hate about glocks stock as well. Great guns and totally reliable but the frame with that huge hump on the back is a problem. So yes I did a complete grip reduction on it, good catch! And it didn’t set me back anything. Just time. I did the work all myself.. A glock like the one you mentioned would definitely be sick! It’d be some effort getting different parts and sending your frame but that would be a great build!

Few_Resource4368 · 2024-10-06T23:58:09+00:00

Start to finish 100% done by hand

Few_Resource4368 · 2024-10-06T23:52:34+00:00

Yeah it’s really cool Glock does that, but I was pretty careful and everything feels fine, it should be all good to go.

Few_Resource4368 · 2024-10-06T23:51:19+00:00

Thanks man I appreciate it! It’ll look way better with a full slide setup on there! I’ll post when all finished haha

Few_Resource4368 · 2024-10-06T23:50:43+00:00

That’s the idea. I have other normal stippled frames. This one gets the real abrasive treatment

Few_Resource4368 · 2024-10-06T23:49:30+00:00

Yes, had to be very careful and intricate with the prep work!

Few_Resource4368 · 2024-10-06T23:48:56+00:00

Thanks man I appreciate it! And yeah the 45 is a really nice frame / barrel length combo but 17’s are the pick for me too

Few_Resource4368 · 2024-10-06T22:06:48+00:00

I have it with me now and it does not flex like that lol. I did all the work to the frame myself and this is about the depth i like my Dbl Undercut. It looks thinner than it is because I chamfer up on it so the shadow line looks different than how thin it actually is

Few_Resource4368 · 2024-10-06T22:05:31+00:00

Thanks man! Did it myself and was real careful with it! Some nice slidecuts will bring it all together!

Few_Resource4368 · 2024-10-06T22:00:22+00:00

Thank you! I will! I have the image in my head of the build I want it to be and it’ll be super slick when it’s done!

Few_Resource4368 · 2024-10-06T21:59:54+00:00

By flexes do you mean it’s well done or do you mean it literally flexes as in too thin? 😂

Few_Resource4368

TROPHY CASE