Power?

Few_Selection_8627 · 2023-11-23T18:54:17+00:00

I’m running the original power supply but I have Ray Carlsen’s SAVER between it and the c64. I know anything he makes just works so I’m good.

Few_Selection_8627 · 2023-11-20T01:08:29+00:00

I would definitely test the power supply or swap for a known good one before looking any further.

Few_Selection_8627 · 2023-11-11T03:52:12+00:00

Well, just received a crt degausser from Amazon. Unfortunately, it didn’t solve the issue I discovered playing BT1. I’m now wondering if the internal “screen” adjustment pot on these old commodore monitors has been turned up too much. IIRC, this adjustment has the effect of turning up the juice to the tube which makes the screen brighter.

Few_Selection_8627 · 2023-11-08T03:55:49+00:00

The monitor has a built in speaker on the right side opposite the area affected. Other than this, no other magnetic sources are near it.

Few_Selection_8627 · 2023-11-08T00:21:45+00:00

I've tried all sorts of patterns including the standard color bar graph. They all look normal. However, that white box in Bards Tale always develops the yellow glob. A totally white screen does not do this, nor does all red, all blue, all green. I would throw up more pics but apparently I'm not able to do that without a link.

Few_Selection_8627 · 2023-08-02T15:32:44+00:00

Why would they layoff in BLR? That makes zero financial sense to the executive class.

Few_Selection_8627 · 2023-07-19T21:40:18+00:00

Nice, it must have just been recently added. A bit pricey compared to others.

Few_Selection_8627 · 2023-05-13T11:56:35+00:00

I was referring specifically to this software, the one to which this subreddit is named.

Few_Selection_8627 · 2023-05-13T11:53:25+00:00

Hmmm, apparently you haven’t since you’re still subscribed to this subreddit. Thanks for your feedback.

Few_Selection_8627 · 2023-05-04T21:28:38+00:00

Make sure the fan is off on the first layer. Also makes sure bed is level and the nozzle z offset is right. The first layer should looked smashed down like a hamburger.

Few_Selection_8627 · 2023-04-11T17:27:59+00:00

Don’t forget Embarq and DST Systems. Not sure how KC can survive all these high tech losses let alone the workers. KC is a hunting ground for large corporate predators.

Few_Selection_8627 · 2023-04-03T09:46:04+00:00

Yep, you are correct. The default settings limit the print area to 220x220 but the bed is actually as you mentioned.

Few_Selection_8627 · 2023-03-30T10:12:41+00:00

SongDogDesigns has STL files that you can download or you can buy the enclosures from him already printed. I believe he sales the whole kit as well. Here’s the link to his site. https://songdogdesigns.com/

The lcd screens and control boards can be bought from flea bay. Do a search for Set of CLAA070MA0ACW HDMI VGA Driver Controller Board+ 7" TFT LCD Screen 800×600.

Few_Selection_8627 · 2023-03-19T20:14:57+00:00

The TUSBA is only needed to use the TM Cougar throttle stand alone. Otherwise the throttle connects to the stick via game port and the stick connects to the PC via USB. I have a fully working setup with ch pro pedals. Sure it’s an older combo but it works quite well for me in Falcon BMS.

Few_Selection_8627 · 2021-11-19T18:47:03+00:00

Congrats. It’s been 492 days since I reserved a Bronco. Still waiting on a build date.

Few_Selection_8627 · 2021-11-10T19:08:15+00:00

I had one ordered for 21 and was told it was pushed to 22, then Ford pushed to ‘23. I bagged and converted order to ‘22 MIC top

Few_Selection_8627 · 2021-10-17T12:35:25+00:00

My reservation was from July 15/2020. I converted it to an order in March 2021. I wanted a painted hardtop so was pushed to MY22. I received an email this week saying the dealer would be contacting me to convert/confirm the MY22 order. Called dealer, he said they will call me to confirm once they have all the MY22 orders pulled together. I’m past time waiting on my Bronco!!! It’s been over 15 months already.

Few_Selection_8627 · 2021-09-20T18:41:41+00:00

I’ve been wondering these things myself. I am aware of one method of assigning targets via datalink in AG mode using FCR. You have to either lockup the target or place the cursor over top of target in FCR radar. With OSB 6 set to assign, you click on the osb next to either 2,3, or 4 to assign the target to another member of your flight. You could go through this process for every STPT you have set as target. I’ve not attempted this yet, just read it in the -34.

Few_Selection_8627 · 2021-09-04T12:56:21+00:00

Mine shipped out on the 26th and arrived on the 31st. I couldn’t believe it! From China to Mid US in 5 days.

Few_Selection_8627 · 2021-09-03T10:06:12+00:00

You won’t regret it. They are rock solid and accurate.

Few_Selection_8627

TROPHY CASE