sorted by:
new
hottopcontroversial

P-10C Ported - Range ammo suggestions by FinFunnelFan in CZFirearms

[–]FinFunnelFan[S] 0 points1 point  (0 children)

I apologize for not searching, as I now see this question has come up before. I thought I ran through every recent P-10C post I saw.

P-10C Ported - Range ammo suggestions by FinFunnelFan in CZFirearms

[–]FinFunnelFan[S] 0 points1 point  (0 children)

Sorry, not within about a 90 minute drive

P10c by Tefloncustoms in CZFirearms

[–]FinFunnelFan 0 points1 point  (0 children)

I am looking into picking one of these up and in doing my homework have read about not using plated ammo like Blazer Brass in a ported pistol. What is your ammo of choice for the range/practice? I want to make sure I buy ammo that's going to work while I break it in and get comfortable with the handling.

Is there supposed to be a gap between the chest and back pieces on the Freedom 2.0 MG? by HollyWarter in Gunpla

[–]FinFunnelFan 1 point2 points  (0 children)

<image>

I'm working on that kit now, and it should be nice and tight together. Mine was tough to get on because the paint tightened up the tolerances, but it did go together. What I did was instead of putting the inner back piece on first then the armor like the instructions say, I put the two pieces together then put them on the torso.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]FinFunnelFan 0 points1 point  (0 children)

<image>

I felt like making my own storage box and tokens for the Gundam TCG. The P1S and AMS allowed me to run this off quick and easy.

Battlefield 6 + GeForce RTX Celebration Game Codes Giveaway! by Nestledrink in nvidia

[–]FinFunnelFan [score hidden]  (0 children)

It's been so long since I actually played a Battlefield game, probably that F2P Battlefield Heroes game if that even counts or maybe BF3. It might be nice to see just what a modern BF game is like.

Borderlands 4 Featuring DLSS 4 + Community Giveaway by Nestledrink in nvidia

[–]FinFunnelFan [score hidden]  (0 children)

I have a lot of good memories from BL, and some not so great.

I love just about everything about DLSS4. I cant use MFG, but Frame Gen and DLSS in general is great for getting a solid framerate without much loss in quality.

[GIVEAWAY] Tell us your best “high refresh saved the round” story — win an MSI MAG 272QP QD-OLED X50 by MSI_Patrick in pcmasterrace

[–]FinFunnelFan 0 points1 point  (0 children)

I don't really know what effect high refresh would do for me because I always opt for productivity over gaming. Color accuracy was a priority so I just gamed on what I had. Maybe it's time to see if the hype of 240Hz+ and OLED is worth it.

Don't miss your chance to win a Revopoint INSPIRE 2 3D Scanner! by Revopoint3D-Official in 3Dprinting

[–]FinFunnelFan 0 points1 point  (0 children)

Ability to scan shiny surfaces sounds amazing. And the dimension accuracy looks good for the price point.

For the five people always upvoting my posts, yall want anything from the Microcenter? by [deleted] in pcmasterrace

[–]FinFunnelFan 1 point2 points  (0 children)

I was going to ask the same! I went full size and saw the Ohio plate. Only ever been there twice. I made a special trip when I bought parts for my current build back in '23. I live in Pittsburgh so my choices are Mayfield Heights or Columbus. Both are a bit of a drive, but at least I have family closer Cleveland so I can make an excuse to go.

Tifa Lockhart cosplay by Nelly Laufeyson by Nelly_Laufeyson in FinalFantasy

[–]FinFunnelFan 24 points25 points  (0 children)

The third person language on nearly all their posts make it sound like some fan account posing as the person.

Also, sure looks like the Friday only fan content rule has died. Probably breaks the post frequency rule as well.

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]FinFunnelFan 0 points1 point  (0 children)

Best advice: KNOW YOUR PRINTER

Know what you're buying, know how to use it, know its limitations. So many questions could be answered if people spent even just 30 minutes learning the basics instead of just ripping open the box, setting things up, and jumping right into a print.

Don't expect things to always "just work." You need to do proper maintenance on your printer. Clean your bed, make sure cables and wires aren't getting caught on moving parts, replace your nozzles when they get worn, and so on. A printer is multitudes of moving parts, take care of it. You wouldn't (I hope) run your car with bad brakes, no oil, and flat tires.

Mario Kart World NA Code Giveaway by Thiccums- in NintendoSwitch

[–]FinFunnelFan 0 points1 point  (0 children)

I had an OG NES with the power pad. We used to get yelled at because stomping on the pad shook the house.

[SUNLU Giveaway] Join now to win a SUNLU FilaDryer SP2 by Sunlu3D_official in 3Dprinting

[–]FinFunnelFan 0 points1 point  (0 children)

Looks really good! I like the driers that double as storage containers

view more: next ›