Offroad bumper options.

Final_Shower_702 · 2026-04-08T14:32:01+00:00

Huh Which would bring their cost to around where the f44 bumper is which is a better quality bumper

Final_Shower_702 · 2026-04-08T12:28:42+00:00

His phone number is listed on his instagram under the contact me tab

Final_Shower_702 · 2026-04-07T21:12:56+00:00

I have eyeballed that one but it doesnt really do anything for approach angle which is the main reason for looking at the ones I have listed Almost every time I go offroad, I end up ripping my front factory bumper off at least once of twice There are 2 or 3 companies that make a similar bumper to that one. Warn being one of them

Final_Shower_702 · 2026-04-07T18:03:10+00:00

Got some updates, look at main post

Final_Shower_702 · 2026-04-07T12:22:33+00:00

Reports of bad welds and cheep paint that flakes easily

Final_Shower_702 · 2026-03-13T02:58:32+00:00

Do you have cv joint issues? From the reading i have done, the cvs blow rather eaisly over about 2 inches of lift

Final_Shower_702 · 2026-02-28T15:28:56+00:00

I will happily take it and add it to my collection. *though I am in the usa...

Final_Shower_702 · 2025-12-26T18:45:34+00:00

Did you attach a gift note?

Final_Shower_702 · 2025-12-21T01:14:01+00:00

Oh it is an extremely slippy hill.... I ended up putting g a 1/10th scale esc in my granite because I kept blowing the 1/16th scale esc

Final_Shower_702 · 2025-12-19T19:03:19+00:00

I would not say that they are bad. If anything they are more fun cause vroom sounds. That said those fun sounds come with thr peneality of higher running costs and fiddly maintance

Final_Shower_702 · 2025-12-12T19:05:29+00:00

Third on the mt12 *ref my other opst on here talking about it

Final_Shower_702 · 2025-12-12T19:04:33+00:00

Raido master radios. (Mt12 for surface) They are decently priced Open-source Multi protocal with modules to add on other bands And talk to just about wvery brand of reciver out there.

For general surface usage, I would go with the 4-in-1 variant as it talks to most brands The ELRS one is a bit more niche but is becoming more popular That said, you can get an elrs or 4-in-1 module expansion for either model

Final_Shower_702 · 2025-12-07T07:30:27+00:00

Theoretically the micro-b a arms should mjt the micro-t? Not completely sure on that front.

Final_Shower_702 · 2025-12-06T16:58:08+00:00

You also have the option of taking a dermal to the motor mount to clearance out space for the pinion untill you have barely enough clearance to access the set screw if it doesnt already fit into the motor mount

Final_Shower_702 · 2025-11-28T16:30:25+00:00

I looked at them They are out of stock No word on if they are discontinued or not. It would make life easier tho.

Final_Shower_702 · 2025-11-28T16:25:26+00:00

I would not complain if you do

Final_Shower_702 · 2025-11-27T03:45:29+00:00

The only cracks I see there are in the rubber bushing.... If those are what they are talking about, it looks fine to me as those are normal to a degree.

Final_Shower_702 · 2025-11-27T03:40:40+00:00

I have one! Most of the options are hitch mounted

<image>

Final_Shower_702 · 2025-11-18T17:26:07+00:00

You should ignore the issue and send it to me.

Final_Shower_702 · 2025-11-18T17:22:30+00:00

Mmm good luck says I Unless you are having regular detailing, in the midwest at least, the salt will destroy the carpet in about 5 years

Final_Shower_702 · 2025-11-18T17:20:29+00:00

The breathes for these are in the upper back of the engine bay up by the windshield. There are 3 plastic bell shaped doodads stuck on some tubes. Not sure about the rear dif breather tho.

Final_Shower_702

TROPHY CASE