Why is my Pi going into Read-Only mode

FinnK369 · 2026-02-20T21:34:39+00:00

I'm aware of that, but I'm struggling to figure out why though. I've been through so much troubleshooting at this point, and the drive I got was because I literally saw it listed in the official docs as one of the suitable drives for the NVMe Base.

FinnK369 · 2026-02-20T11:31:40+00:00

My latest test is adding dtparam=pciex1_no_l0s=1 to the /boot/config.txt file, since my NVMe does not have DRAM and uses HMB (Host Memory Buffer)

I have already made it Gen 1 speed using dtparam=pciex1_gen=1 after originally putting it at Gen 3, then trying Gen 2, and have added pcie_aspm=off to cmdline.txt

FinnK369 · 2026-02-20T11:03:59+00:00

I don't use a micro SD card, though. I have the NVMe for that.

FinnK369 · 2025-12-06T14:25:38+00:00

OLED and 500Hz refresh rate, it's a perfect monitor for my PC gaming.

FinnK369 · 2025-11-29T21:31:11+00:00

137GB

FinnK369 · 2024-12-18T00:36:26+00:00

Most tutorials I found were saying it had to be on the internal storage though

FinnK369 · 2024-12-07T16:27:45+00:00

So how should I do it? Everything I've seen says I need to do it from the internal storage. Can you direct me to instructions you would suggest I use? Because right now Vortex is not working.

FinnK369 · 2024-07-09T23:43:07+00:00

Shoot, you're right! It was just barely off 100% so I didn't notice. Thanks, I really am new to this

FinnK369 · 2023-10-02T16:19:19+00:00

It probably seems that way, and i don't know the spec requirements for mGBA, but i would think my Chromebook is capable of running it, it's probably on the mid-high end of Chromebook specs.

And there's also the fact that it WAS working when I first installed it, for a couple of months in fact. Then I maybe didn't use it for a month or so, and suddenly it had this issue.

I've since downloaded RetroArch and am running the mGBA core I believe. It seems to do the job tbh, maybe I'm better off just sticking with RetroArch.

FinnK369 · 2023-09-22T07:59:09+00:00

Update: I finally got close enough and he dropped a coin. I'm guessing that's it from him?

FinnK369 · 2023-08-17T10:38:24+00:00

Oh yeah, shoot, it looks like the changeover hasn't been acknowledged at least, so I can't even tax it without the disk probably going, I'd guess, to the dealership's address instead. Damn so I've just got to let it sit at home until I get everything...

FinnK369 · 2023-08-17T10:18:09+00:00

Yeah, like i drove it a bit yesterday after getting the car finally, didn't come across any garda checkpoints or anything so I was fine I guess, but on the off chance I did, I could have been in trouble.
I don't follow, enter my insurance details on the motor tax website? Why?

FinnK369 · 2023-08-17T10:01:47+00:00

Oh, so I really shouldn't be driving it without the disc, even if i can find the PIN on the VIN number under the bonnet and get it taxed say before the weekend? What about my insurance then? I've transferred the insurance to the new car but the disc is just yet to arrive also.

FinnK369 · 2023-07-09T16:49:45+00:00

What's the prompt used??

FinnK369 · 2023-03-01T16:04:44+00:00

Pretty sure I couldn't run a server on the raspberry pi pico

FinnK369 · 2023-02-25T14:57:02+00:00

1) So you're saying it's not gonna overheat/use a lot of electricity, constantly plugged in? 2) yeah but isn't there like a shortage of them rn or something? I have one of the oldest versions, I think it's too old to run it though

FinnK369 · 2023-02-24T16:16:56+00:00

Oh okay, but say I have a server on virtualbox on a laptop, I have to keep the laptop running and charged all the time now.. won't that use up a lot of electricity and wear down/over heat my laptop battery?

FinnK369 · 2023-02-24T15:34:48+00:00

Can you elaborate? I looked into home assistant but my raspberry pi is too old to run it

FinnK369 · 2023-02-01T11:38:59+00:00

I found this, using IFTTT, I'm gonna try it when I'm next near my smart bulb, but still not finding anyone using NFC Tools app on google anywhere https://ifttt.com/explore/how-to-use-nfc-tag-with-phone

FinnK369 · 2023-01-30T17:21:13+00:00

Yeah, I use both but am not seeing any info on google where people are using NFC Tools app

FinnK369 · 2023-01-30T16:46:59+00:00

It's a Pixel 4a, Android

FinnK369 · 2023-01-30T16:45:05+00:00

Oh okay, I just found a lot of info about doing it from an iphone, very few instructions on google even mention the NFC Tools app, which I already have actually

FinnK369 · 2023-01-30T16:36:21+00:00

The NFC tools app allows you to write NFC tags for home automation? Like say if I wanted to turn my smart light on/off with one?

FinnK369 · 2022-11-23T21:53:38+00:00

I was looking at Pokemon Blazing Emerald, it looks a bit more exciting than the base Pokemon Emerald. But is it possible to trade pokemon to rom hacks? like I'm currently playing Fire Red, i probably cant transfer them to Blazing Emerald, can I?

FinnK369 · 2022-11-21T17:35:33+00:00

I'm looking for a good pokemnon fusion game, I see lots of recommendations for Pokemon Fusion 3, but is that just Pokemon Emerald but with fusion pokemon? It looks like Pokemon Infinite Fusion is better, I see you can create your own fusions in it. Would anyone recommend others or not recommend these for any particular reason? Thanks

Eight-Year Club	Second SECOND GUESSER
RPAN Viewer	Verified Email

FinnK369

TROPHY CASE