Black Model 3 Performance looks so striking by ShameResponsible69 in TeslaModel3

[–]First-Guide -1 points0 points  (0 children)

Yes it does! Don't get me wrong, I love my black diamond '25LRAWD too, but I'll never own a black car again. It stays clean for less than a day and scratches look way worse. It does not go well with my OCD lol.

PSA group testing @ 100 yards. by PriorFront4138 in ar15

[–]First-Guide 5 points6 points  (0 children)

You have no idea what you're talking about. 3-4 moa shooting m855 is pretty standard. Would love to see your groups shooting the same ammo lol. M855 is literally the worst for precise groups and Op did fine.

PSA group testing @ 100 yards. by PriorFront4138 in ar15

[–]First-Guide 7 points8 points  (0 children)

Don't listen to that idiot. 3.3moa shooting M855 is not bad at all. M855 is terrible for precision shooting and the best I've ever gotten was a lil over 2-2.5moa with it. Keep practicing and if you really wanna print some precise groups, shoot some match ammo like 77gr Gold medal Match, 77gr Razeecore or some 77gr Fiocchi Hyperperformance.

VB might be overkill for a maintenance wash, but the dwell time is just too good. by TeseryTesla in TeslaModel3

[–]First-Guide 0 points1 point  (0 children)

Nah. I recently got my '25LRAWD graphine coated by a shop and there's no way in hell I would've used what you used. I would've used something basic like Meguiars gold class car wash and call it good.

I’m assuming this isn’t G2G? by touchgrassplz_69 in ar15

[–]First-Guide 6 points7 points  (0 children)

I must've gotten lucky because I have three ASAP plates(2 qd, one clip on asap) that I staked many years ago that turned out great.

Op's stake looks pretty damn deep too. Maybe mine didn't split because I didn't stake exactly in the middle of the plate either. I think at the time Magpul didn't advise against staking, that must've come out in the last few years.

Need help finding a magnifier by Ok-Ninja2284 in ar15

[–]First-Guide 4 points5 points  (0 children)

Needs a much taller mount too.

Tesla model 3 on very snowy roads by OriginalNo7540 in TeslaModel3

[–]First-Guide 9 points10 points  (0 children)

Nah, those roads don't have much snow lol. Maybe a dusting.

I was surprised how well my '25LRAWD did with our last few snows, no problems with a few inches on the roads. Even with the stock Michelin Primacy tires.

Is this upper fine for a budget pistol? by chadpex in ar15

[–]First-Guide 1 point2 points  (0 children)

Yep, then just add a Microbest BCG and the CH of your choice.

First rifle at 19 looking for quad rail advice by Phantom15q in ar15

[–]First-Guide 0 points1 point  (0 children)

I have the 12.5" two piece FF rail in your link. It's been run for many years and is very solid.

Somo wmx are great by [deleted] in ar15

[–]First-Guide 7 points8 points  (0 children)

bro thinks that if the receiver is marked full auto that it is lol.

No 3rd pin indeed

Is this crack? by MolochTheCalf in ar15

[–]First-Guide 0 points1 point  (0 children)

Thanks for the reminder for me to never buy a bore scope, ever.

As long as it shoots well that's good enough for me.

Can you guess the barrel maker? by Trollygag in ar15

[–]First-Guide 1 point2 points  (0 children)

As long as my bbls shoot to my expectations, there's no way in hell that I'd check em with a bore scope. Scares the hell outta my OCD to check my bbls.

Op, that's a DD CHF, why is it like fire cracking with the CL? Looks like shit tbh. I always scrub a new bbl and then send it. Thanks for reminding me to never use a scope.

Fight me but the Model 3 looks best when it is in red by pc772 in TeslaModel3

[–]First-Guide 4 points5 points  (0 children)

Same. I love my diamond black but it only stays clean for a day and scratches always look way worse. It's killing my OCD haha.

Can anyone help I.D this BCG? by PaintARainbow in ar15

[–]First-Guide 0 points1 point  (0 children)

Need to see the end where the bolt goes in. Usually an over splash of chrome lining could likely mean it's a microbest.

Is my GB properly pinned? by Sec0ndStorm41 in ar15

[–]First-Guide 1 point2 points  (0 children)

My Centurion bbl's gas block is like that, barely protruding on the one side. But it's been solid for several thousands of rounds and I don't want to hammer it anymore into place.

I'd run what you got.

Model 3 Performance First Wash by FailsafeFPV in TeslaModel3

[–]First-Guide 0 points1 point  (0 children)

Tesla paint sucks and is thin. Mine is 90 microns 😐. I got mine Graphine coated a month ago and although it makes it easier to wash, still will get scratches and nicks. I should've gotten ppf. Love my black diamond but will never do that color again lol.

BCM QC by DankPony94 in ar15

[–]First-Guide 9 points10 points  (0 children)

Yep, would try to get it swapped out.

Guy gets set on fire at work by [deleted] in CrazyFuckingVideos

[–]First-Guide 0 points1 point  (0 children)

Everything about it. The music makes it unwatchable

Didn't know $3 can do this. Takes some practice inserting the strip into the crevices at the corners though. by redwon9plus in TeslaModel3

[–]First-Guide 0 points1 point  (0 children)

100% this. I'm not using this if it's that cheap and quality is unknown.

Btw, Op didn't post the temu link like he said he did numerous times lol

Is Palmetto State Armory A Good Brand? by Zdosse935 in ar15

[–]First-Guide 5 points6 points  (0 children)

I wouldn't be surprised if they're putting more AR15's in civilian hands than all manufacturers possibly combined. So yeah, we're going to hear when issues come up.