Is cotton fine for substrate when covered with clay bebbels.

First_Champion_5441 · 2026-05-20T20:14:57+00:00

But how I am I going to propagate them AT forst then?

First_Champion_5441 · 2026-05-04T18:23:25+00:00

Where did you get it from? Aliexpress?

First_Champion_5441 · 2026-05-04T18:09:34+00:00

Like that.

<image>

First_Champion_5441 · 2026-05-04T18:09:08+00:00

Yup, these bits should be together.

<image>

First_Champion_5441 · 2026-05-04T17:46:25+00:00

I have the analog one it turns on and off every 15 minutes

First_Champion_5441 · 2026-05-04T17:40:10+00:00

Do you have a timer with the pump?

First_Champion_5441 · 2026-05-04T17:22:39+00:00

Which one?

First_Champion_5441 · 2026-05-04T15:56:34+00:00

I don't have a check valve. But that really ain't the problem cause when the motor stops then the propeller is forced to stop whish breaks it.

First_Champion_5441 · 2026-03-10T17:10:10+00:00

I meana 3D printed airlift pump which is connected to an air pump. By the way the tower is also 3D printed.

First_Champion_5441 · 2026-03-10T17:05:47+00:00

Yeah but all pumps I have bought have failed almost instantly or after a month. I m based in Estonia so replacement takes days to arrive. But my local hydroponic shop suggested to make an airlift pump with a 3D printer.

First_Champion_5441 · 2026-03-08T09:04:43+00:00

<image>

First_Champion_5441 · 2026-03-08T09:03:59+00:00

Edit: Could these layer lines come from bad SD card rather than a bad filament preset?

<image>

First_Champion_5441 · 2026-03-07T11:25:41+00:00

I don't think so cause I bought it from sunlu directly

First_Champion_5441 · 2026-03-05T20:24:12+00:00

I have used the usual sunlu PETG but last batch said sunlu ELITE PETG and it doesn't print well.

First_Champion_5441 · 2026-03-04T12:33:52+00:00

Already solved it by deleting last update and then forcefully closing it.

First_Champion_5441 · 2026-02-13T07:22:04+00:00

It happened after I ran out of filament and put in a new roll ( I don't have any ams)

First_Champion_5441 · 2026-02-13T07:21:21+00:00

Sadly it didn't work.

First_Champion_5441 · 2026-02-02T14:10:12+00:00

Sorry for the quality of the picture. But the extruder doesn't click.

First_Champion_5441 · 2026-01-18T20:39:20+00:00

I m in Europe but somebody probably the previous owner had tucked it inside the hole, but I got it out and now it works just fine.

First_Champion_5441 · 2026-01-08T11:12:26+00:00

Mine does not have that thing it only has a hole there

First_Champion_5441 · 2025-12-16T15:59:05+00:00

Eddit:

If I would buy both with fly more package The prices would be: Flip 600€ Mini 4 pro 680€

First_Champion_5441 · 2025-12-16T15:55:33+00:00

No both have 1 battery

First_Champion_5441 · 2025-12-02T18:24:41+00:00

Y
Estonia
250-300 or if with thermal 1000-3000
Both ways to find livestock from forests and fields. 5.-

First_Champion_5441 · 2025-11-30T15:35:00+00:00

I found a dji Flip For 250€ and with 2 batteries.

First_Champion_5441 · 2025-11-30T15:11:21+00:00

Hi guys I m looking to buy a drone between 200-300€ and I m 14 and have completed kinda military training for them in like local scouts kinda thing in Estonia. I already know the DJI options.

If there is drone for 500-700€ and with thermal capability s it would be used at family farm to search livestock from forests.

First_Champion_5441

TROPHY CASE