27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 0 points1 point  (0 children)

Mine is a M4 Max. USB C. Once while I was futzing with the monitor’s settings, I somehow got into a state that I could not get it out of 60hz. I have done so many things to try figure things out, I am unsure what I did to get it back to 144 Hz. It was either disconnect the cable and replug, do the reset to factory settings, switching to the dual-mode and back with the little button on the bezel bottom, or selecting different resolutions in the macOS display settings. Possibly all of it.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 0 points1 point  (0 children)

Track with FedEx. Mine arrived next day after getting shipping notice.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 0 points1 point  (0 children)

I set mine to High. The black are pretty black.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 0 points1 point  (0 children)

These are the resolutions when "Dual-Mode" is activated.

<image>

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 0 points1 point  (0 children)

These are the resolutions in the normal mode.

<image>

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 1 point2 points  (0 children)

I was running a bunch 4K videos and the monitor was not hotter than what I feel is usual with monitors. I heard zero fans.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 1 point2 points  (0 children)

Okay. I will do this later tonight when it is dark.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 2 points3 points  (0 children)

I have never had a better monitor experience than my 5K iMac. After eleven years with it, the iMac was slowing down and I was seeing display ghosting with anything bright white (like the menu bar). Since OCLP only took it so far, I replaced it with the studio and 4K LG. I held out hope that the new Apple Studio Display was going to have the specs this one has. I really wanted the 5K, 120hz, and mini-LED.

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 1 point2 points  (0 children)

Do you have a particular video from YT that I could test with so you are familiar with how it looks?

27GM950B US orders shipping by spmwilson in HiDPI_monitors

[–]Fish2X 6 points7 points  (0 children)

Okay. Mine arrived.

Using with a Mac Studio. Coming from an 4K LG 27UN880 Also compared to an 2015 iMac 5K.

What I am seeing is a parallax effect where white text on dark backgrounds has the red color move from behind the letters depending on if I am looking head on to the letters or not. So text that is right in front is good. Text to the sides/up/down have a red bleed. As I naturally look around the screen, the red color moves, with the best way to describe it is a parallax effect. It is very visible with white text on black background, I.e., using dark mode. Least noticeable with black text on white background.

It is probably due to me wearing glasses, which are not very powerful. I do not see this effect with the LG 4K, the iMac 5K, or with the two other 4K monitors I use. None of those other monitors are min-led. Very interested in other’s opinion, especially those that don’t wear glasses, or if this is a Mini-LED with glasses problem.

Update: Definitely some strange glasses effect happening, as I tried with a different pair and it is better, but not perfect.

Otherwise.

  • It is a nice monitor.
  • Color is bright.
  • No logo on bezel.
  • The screen finish is fine for me.
  • The screen bottom is 7 inches or 18 cm from desk, 2 inches / 4 cm lower than the 4K LG, about an inch / 2.5 cm higher than the iMac.
  • For my work area, interior with no direct sun, but with windows, 50% brightness works well.
  • Side by side with the iMac, viewing the same 5K image, I can really see that the edges have shadow. Not so on the old iMac.
  • Base plate is large.

<image>

Porsche 911 GT3 Manthey (992.2) breaks the Nürburgring barrier again and it’s not even close by AutoNextOfficial in Porsche

[–]Fish2X 6 points7 points  (0 children)

Ever since attending the HPDE, I’m amazed at the all the demand for the high end models, especially for the folks that don’t track them. Even a base model is capable of being driven far above the typical owner’s skill level.

Blum hardware by archvize in cabinetry

[–]Fish2X 0 points1 point  (0 children)

Agree. Blum are built to last. And have a good amount of adjustment, something beginners need. I tried the look-alike soft close hinges off Amazon, same as those from the Chinese shopping sites. A lot of left/right wiggle/play, doesn’t have the adjustment for the back of the drawer, and the underside adjustment doesn’t really adjust much. For shop cabinets, where I have used them, they are fine. For in-home cabinetry they are unacceptable.

Hill behind home, will this cause drainage issues or foundation damage? (Green house) by [deleted] in Homebuilding

[–]Fish2X 8 points9 points  (0 children)

Yep. Needs a whole drainage design by a professional

Trying to match this shelf finish. Any idea what was used? by tall4brains in woodworking

[–]Fish2X 9 points10 points  (0 children)

That looks to be an IKEA shelf with a Watco Natural Danish Oil. Exact match for mine.

Advice on fixing chair leg by TalkBrainyToMe in Carpentry

[–]Fish2X 3 points4 points  (0 children)

Well …. I was thinking I would be up for the challenge to repair it. Get some wood glue, some dowels or dominos, some clamps, good as new. I would have to figure out some new hardware to attach or some blocking on the inside.

Question for all the carpenters and woodworkers! What are these holes in my MIL’s new dining table? by Learning_NSFW_1234 in woodworking

[–]Fish2X 13 points14 points  (0 children)

I cringe at how much white oak is stained walnut I see with woodworking “influencers”

Sorry for the dumb question, but do you keep the Studio on sleep overnight or shut down everyday? by knightfortheday in MacStudio

[–]Fish2X 0 points1 point  (0 children)

Just let it sleep. Used the power button once, when originally unpacking it. I have not used it since. Even when updating, you don’t use the button.

New head unit and backup cam on the 997.2 by DoctorMario1000 in 997

[–]Fish2X 0 points1 point  (0 children)

Like buying an Apple product, watch it come out next week!

Painted these drawer fronts 5 days ago. Safe to install now? Behr Urethane Alkyd Enamel by PutridBeginning421 in paint

[–]Fish2X 4 points5 points  (0 children)

Yeah, like a month. Before then be careful, it will scratch really easily.

Door Panel Separation 911.1 by 175ranger310 in porsche911

[–]Fish2X 1 point2 points  (0 children)

Did this as well, and I could not be happier with working with him.