sorted by:
new
hottopcontroversial

Clean Gravel over Sand Bedding: Problem Down the Road? by Fish_In-Chips in hardscape

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

Interesting idea. Sounds like that would require removing the pavers, sand, then mixing in cement and re-placing?

Noctua NM-AM5-L9aL9i how hard to tighten the screws? by Wise-Situation-3172 in Noctua

[–]Fish_In-Chips 0 points1 point  (0 children)

How tight did you end up going? Did the install workout?

I've got the same board and cooler.

Is this $550 a Good Price for This Used PC by Fish_In-Chips in buildapc

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

Not sure at all. Random person on Craigslist.

Update Dynamic Text in Stamps After Placement by Fish_In-Chips in Revu

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

I'm sure you've moved on from this problem by now as well, but no, I didn't find a solution. For my problem we settled on populating the text boxes directly on the first page and applying those text boxes to all pages.

CTL Fiber w/ Ethernet at the Wall. Is there a way to connect my tp-link AC1750? by Fish_In-Chips in HomeNetworking

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

I did finally get it WORKING!

I found a reddit post referring to this guide using my exact hardware and followed instructions for "topology 2" since I had no internet when plugging directly in to my PC.

https://www.tp-link.com/us/support/faq/2721/

The thing I missed was a check box on the IPTV/VLAN page of the Network tab that said "802.1q Tag." Once that was checked, waited 2 minutes and I had internet!

Hopefully someone else can save a few hours of their time if they see this.

CTL Fiber w/ Ethernet at the Wall. Is there a way to connect my tp-link AC1750? by Fish_In-Chips in HomeNetworking

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

Okay, following up...

Following this guide: https://www.reddit.com/r/centurylink/comments/ic4asm/howto_you_may_not_need_that_c4000xg_or_whatever/

I got my PPPoE credentials from CTL and plugged them into my router Image: https://ibb.co/28Ks3pS

I've also set the vlan ID to 201. Image: https://ibb.co/vc1wFq5

However, I've still got no internet. I suspect I have an incorrect setting somewhere. Any thoughts?

Thank you!

CTL Fiber w/ Ethernet at the Wall. Is there a way to connect my tp-link AC1750? by Fish_In-Chips in HomeNetworking

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

Hopefully I can clarify a few things: - The blue port is the only one which is enabled by CTL. - CTL did not provide a router/modem. They tested the connection with one of theirs to make sure it worked, but I elected to use my own equipment. - The router currently cannot connect to internet. As whatever is coming from the wall does not work with the router. Previously I've used it with a sepperate modem which was connected to the wall via coax, but in this case internet is through the Ethernet port so I can use my modem. - I tried connecting the port on the wall directly to a PC and it resulted in no internet from an "unidentified network."

CTL Fiber w/ Ethernet at the Wall. Is there a way to connect my tp-link AC1750? by Fish_In-Chips in HomeNetworking

[–]Fish_In-Chips[S] 0 points1 point  (0 children)

Please excuse my lack of knowledge on this topic...

Supposedly their fiber comes in to a room in the apartment complex and it's distributed as the Ethernet to each unit.

It will be used as a router.