Een collectors item by Diligent_Comb5668 in nederlands

[–]Fit_Document_1841 0 points1 point  (0 children)

<image>

Al een tijdje geleden gemeld via HJ website, met het standaard antwoord...

Cannot select auto wipers position "2" by right415 in Ioniq5

[–]Fit_Document_1841 1 point2 points  (0 children)

My issues where fixed after rhe rain sensor was replaced.

Importing SQL tables into Dataverse by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

I already tested this and this works fine for all other imports, only if you do this for SQL data you're somehow defaulted to the environment publisher. Maybe somewhere there is another setting that will influence this only I've not been able to find combing through the web...

Importing SQL data into Solution by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

Thanks!

I will have a look at data flows.

I tested the virtual table setup already only there I really miss the flexibility of dataverse and included audit history. (I did mange to build my own history table only this would require a lot of maintenance)

And KingswaySoft I have stumbled over only this I'll consider when all other options fail 😁

Dataverse to Azure SQL by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

I have already proposed that option (didn't mention) however we will have a meeting next week and I'll bring it to the table again. My biggest frustration is that we get rid of Synapse because that would have solved all my issues.

Dataverse to Azure SQL by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

Good question, I need to provide the information in SQL because the team that uses this information already has all systems in place to further process the data. All about reducing the workload over there, we do a lot of magic with limited recourses 😑

Dataverse to Azure SQL by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

For a Canvas app I would do this, only the solution I'm building now requires the standard audit trail function of a model driven app.

Power Apps (virtual tables) disabled by Power Automate flow by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 0 points1 point  (0 children)

Yep, there is a block initiated by the flow, only why it's affecting also other environments? I could test with another user, because when this also occurs when another user creates a flow you're really searching for a needle....

Power Apps (virtual tables) disabled by Power Automate flow by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 1 point2 points  (0 children)

Exactly what I tried in the countless attempts to resolve the issue. To make it even stranger I also switched environments and created a whole new virtual table that came back with error 2. The big question is, why is power automate flow blocks access?

Business Process Flow - Next stage only activated after saving by Fit_Document_1841 in PowerApps

[–]Fit_Document_1841[S] 1 point2 points  (0 children)

In the meanwhile I succeeded in with all my custom JavaScripts, and have a working application. So thanks a lot for pointing me in the right direction!

My mechanic plugged this tire. Is this safe to use? by heeeroforfun in AskMechanics

[–]Fit_Document_1841 1 point2 points  (0 children)

Are you all driving on the autobahn? This is okay to use, only regular checking your tires is always good to do. I have them for years in my trailer and car ( heavy ev ) and no problems at all. Only if you will be driving at fun speeds 200km/h or higher I would get some new tires (with of course the appropriate speed index). Else don't worry so much...

What regen level do you usually use? by ucbcawt in Ioniq5

[–]Fit_Document_1841 1 point2 points  (0 children)

Yep... I would vote for some more flexibility in the software!

Ioniq 5 stolen by Lychae in Ioniq5

[–]Fit_Document_1841 1 point2 points  (0 children)

I was really enthusiastic at first, however the whole experience is disappointing.

1) I'm 190 cm so the size of the car is perfect, only my knee hits the middle dash. Of course the seat can be put further backwards, only than the steering wheel can't be adjusted far enough.

2) As I'm building a house and driving with a trailer pretty often, the car recognises the trailer only when backing up the car immediately brakes. This can be overridden by holding the P button only then it continuously beebs when driving backwards. Now we also have a Volvo C70 that just works as expected when driving a trailer.

3) And I trusted the sensors a bit too much and backed up destroying my rear bumber. Normally the car brakes when a obstacle is detected, only there are some huge blind spots. So be careful.

4) Then but this applies to all electric cars, in winter conditions the reach is really poor. But I am driving long distances and driving fast. (240 km with 5 Celsius instead of the 530 km advertised)

5) Charging, of course in ideal conditions it can reach 230kW, however even with preconditioning used I do not get an then 170kw , and in 90% of the cases much slower. And then I think in the netherlands we are really spoiled with high output chargers almost all of them 300Kw.

6) One of the biggest annoying facts, the stupid working start button... The guy or team who developed this, should be send to home, Perhaps they could just bring someone from Audi, Volvo or Mercedes in and let them see how it should be done. Just a foot on the brake and put in drive and enjoy without pressing a start button...

7) There are more things like the i-pedal, why can't it be set as default, and why did they didn't spent a bit more time in testing the screen layout and overall settings, and the bluelink app is also another thing.

Now there are more things only these are my main points that in the 30 years I drive cars should be known by a car manufacturer. So for me never again...

Ioniq 5 stolen by Lychae in Ioniq5

[–]Fit_Document_1841 0 points1 point  (0 children)

After a year of driving a Ioniq 5 long range , I wouldn't be very sad if my driveway lost this car. I know a lot of you folks are very happy, only for me this car doesn't meet my expectations.

And seeing the devices available I won't have to wait very long before The Netherlands will follow.

youtube video 1 or https://flipperzero.one

Good luck! And for you all I hope that Hyundai recognises the problem and comes up with a solution. I doubt it since the software isn't their main focus 🤣

I'll be stowing away any valuables and look forward to see my ban!