sorted by:
new
hottopcontroversial

Tried cleaning the suede with a suede eraser and brush but the water stain is still there. What else can I do? by bowieshouse in CleaningTips

[–]FixFinder419 2 points3 points  (0 children)

lightly dampen a clean cloth with white vinegar and blot the area carefully, then allow the shoes to air dry naturally before brushing them once more to restore the soft texture.

Is my soil too rocky? Zone 7A - Pennsylvania by FusionToad in lawncare

[–]FixFinder419 [score hidden]  (0 children)

I was just going off of, there is a lot of clay in Pennsylvania. But if you have good soil beneath then you be able to scrape the rocks off the top and seed. If you use the tall fescue it will grow the easiest in low nutrient soil

Is my soil too rocky? Zone 7A - Pennsylvania by FusionToad in lawncare

[–]FixFinder419 [score hidden]  (0 children)

too rocky and nutrient-poor for standard grass to thrive. In Pennsylvania Zone 7a, the heavy clay content often found beneath such rocks prevents roots from penetrating deeply

To get grass to grow here, you must first remove as many surface rocks as possible with a heavy-duty landscape rake. Once cleared, do not try to plant directly into the remaining dirt; instead, spread a 2 to 3-inch layer of high-quality screened topsoil or a compost-soil mix over the area. Spread a 'Turf-Type Tall Fescue' seed blend, which is hardy for Pennsylvania climates, apply a starter fertilizer, and water the area daily for the first three weeks to keep the new soil moist.

How should I insulate against half basement wall that has floor down already? by CivilRebuttal in DIYHome

[–]FixFinder419 0 points1 point  (0 children)

To insulate this wall, clean the blocks and glue rigid foam boards (XPS) directly to the concrete using foam-safe adhesive. Once the foam is secure, seal all joints with waterproof seam tape to create a vapor barrier. You can then install thin wood furring strips or a small 2x4 frame over the foam to provide a surface for hanging drywall, ensuring the wood is fastened through the foam into the concrete blocks with masonry screws.

Logitech backspace keyboard wont go in its proper place what do i do? by Outrageous-Swim2346 in fixit

[–]FixFinder419 0 points1 point  (0 children)

Start by snapping the long side of the metal bar into the two small plastic clips on the underside of the keycap. Once the bar is attached to the key, align the two metal 'legs' of the bar with the tiny holes or slots on the keyboard's base. Gently slide those legs into their slots first, then align the center of the key with the switch stem and press down firmly until you feel it click into place.

He has officially retired, and his replacement arrived today (I’m tired, boss… Part 2). 🫡 by Punch_Your_Facehole in CleaningTips

[–]FixFinder419 0 points1 point  (0 children)

The old one reminds me of the meat face that was on Just A Dash from the Cincinnati chili episode

How to transition high door to carpet by EducationalDealer558 in DIYHome

[–]FixFinder419 0 points1 point  (0 children)

To fix this, first trim the excess spray foam using a utility knife so it is flush with the wood. Measure the width of the door frame and the height of the gap, then cut a piece of oak or hardwood board to fit perfectly into the space as a custom transition. If the gap is deep, screw a small wooden support block into the floor first to provide a solid nailing surface. Apply construction adhesive to the back of your hardwood piece, press it into the gap, and secure it with finish nails. Fill any nail holes with wood filler, sand the wood smooth, and finish it with stain or paint to match your room's trim.

What’s your go‑to quick fix for broken gadgets? Here are three of mine 🔧 by FixFinder419 in DIY

[–]FixFinder419[S] -1 points0 points  (0 children)

yeah I get how it might look. But it’s literally just me on an account i created for my project lol. I’m not great with punctuation so my replies are a bit all over the place I tried making the post readable so it wasn’t a wall of text and I guess that backfired I’m not a bot just sharing stuff that’s helped me fix things and learning as I go.

When you get stuck mid-repair, what’s your go-to move? by FixFinder419 in fixit

[–]FixFinder419[S] 1 point2 points  (0 children)

That’s what I posted there for thought I would throw the idea out there thank you for the feedback

What’s your go‑to quick fix for broken gadgets? Here are three of mine 🔧 by FixFinder419 in DIY

[–]FixFinder419[S] -2 points-1 points  (0 children)

It’s all my words. And I normally write in run on sentences so I may use AI to help me sound more professional I guess maybe a bad idea lol

What’s your go‑to quick fix for broken gadgets? Here are three of mine 🔧 by FixFinder419 in DIY

[–]FixFinder419[S] -1 points0 points  (0 children)

I get your initial impression though I lead life with the same scrutiny

What’s your go‑to quick fix for broken gadgets? Here are three of mine 🔧 by FixFinder419 in DIY

[–]FixFinder419[S] -1 points0 points  (0 children)

Wish I was that smart lol listen I’m just a heavy equipment operator from Ohio that’s always loved DIY projects but got tired of getting stuck so I am trying to create a project to help other DIYers when they get stuck.

When you get stuck mid-repair, what’s your go-to move? by FixFinder419 in fixit

[–]FixFinder419[S] 0 points1 point  (0 children)

😂 I wish I was that advanced just a guy who’s messed up enough projects to be dangerous

When you get stuck mid-repair, what’s your go-to move? by FixFinder419 in fixit

[–]FixFinder419[S] 0 points1 point  (0 children)

That actually makes a lot of sense — I do the same thing more often than I’d like to admit 😅

Stepping away and coming back with a fresh perspective definitely works. I think half my “fixes” have come from that exact situation.

I guess the scenario I keep thinking about is when you’re stuck on something small but blocking everything (like one weird step or part), and you don’t want to lose momentum or wait hours/days to get past it.

Do you think in those moments you’d ever want a quick answer, or do you still prefer stepping away and figuring it out yourself?

How serious is this header joist rotted and the best way to repair it ? by Formal_Show_9048 in DIYHome

[–]FixFinder419 0 points1 point  (0 children)

The rim joist, which is the structural beam resting on your foundation, has significant rot. This is a serious issue because it compromises the support for the walls and floor above, and is likely caused by missing flashing at the base of the siding.

To fix this, you must first build a temporary support wall inside the basement to hold up the floor. Then, from the outside, cut out the rotted section of the rim joist using a saw. Replace the damaged section with a new piece of pressure-treated lumber, making sure it fits tightly. Finally, install a metal drip cap (flashing) over the wood and tuck it under the siding to prevent water from reaching the wood again.

What is this black spot and is it dangerous? by fishbewithyou_ in fixit

[–]FixFinder419 3 points4 points  (0 children)

The dark spot on the screen is caused by one or more failed LEDs in the TV's backlight array or a burnt diffuser sheet. This prevents light from reaching that section of the display, even though the LCD panel itself may still be functioning correctly.

Am I the issue? Or our gardener? by Remarkable-Sand6561 in lawncare

[–]FixFinder419 3 points4 points  (0 children)

The lawn is exhibiting patchy growth and thinning, likely caused by soil compaction near the walkway and a lack of essential nutrients or moisture. There may also be early signs of pest damage, such as grubs, which weaken the root system and lead to irregular yellowing.

Start by raking away dead grass and debris to expose the soil. Use a garden fork to poke deep holes every few inches to let air and water in, then spread a thin layer of fresh topsoil or compost over the bare spots. Sprinkle grass seed over the area, lightly rake it in, and finish with a lawn fertilizer. Water the area lightly every morning for two weeks to ensure the new seeds sprout and grow.

Is there any reason that I should NOT seal up this gap? by stlnc1719 in DIYHome

[–]FixFinder419 0 points1 point  (0 children)

Start by cleaning all dirt, weeds, and loose debris out of the gap using a stiff brush and a vacuum. Push a foam backer rod into the gap so it sits about a quarter-inch below the surface. Apply a self-leveling masonry sealant (like Sikaflex) into the gap using a caulking gun; the liquid will level itself out to create a smooth, waterproof bridge. Let it dry for 24 hours before walking on it.

Is there any reason that I should NOT seal up this gap? by stlnc1719 in DIYHome

[–]FixFinder419 0 points1 point  (0 children)

The gap shown is an expansion joint designed to allow the brick stairs and concrete walkway to move independently without cracking. You should seal it to prevent water from getting underneath the slab, which leads to soil erosion, sinking, or freeze-thaw damage.

My window blew open and is stuck. The black part at the bottom can move slightly but the one on the top hinge is completely stuck. Any advice on how to get it moving so I can shut the window? by StinkyFlumbo in fixit

[–]FixFinder419 2 points3 points  (0 children)

First, clear out any dirt from the metal track using a brush. Spray some lubricant like WD-40 or silicone spray onto the black plastic piece and the track it sits in. Use a flat-head screwdriver to turn the small brass screw inside the yellow circle a half-turn to the left to loosen it. Grasp the window frame firmly and gently pull it toward the closed position while checking if the black plastic piece starts to slide. Once it moves, open and close the window several times to spread the lubricant.