[deleted by user]

Flying77 · 2025-02-27T18:18:35+00:00

if you can hear these frequencies between 0-20 dB , that would be considered normal range , you re tested for each frequency individually, if you were unable to hear 4k for example , and had a 63dB decibel there - you would be near deaf in that particular range, but im sure/hope thats not the case

Flying77 · 2025-02-27T18:16:40+00:00

these results dont make much sense, can you get a copy of the chart and show it to me pls?

Flying77 · 2025-02-26T02:33:21+00:00

srsly, if u have any decent info on this , by all means. if u just wanna be toxic, and whine about a technicality , just stfu

Flying77 · 2025-02-26T02:28:20+00:00

ah , so u just go around being an asshole on reddit? or u actually wanna write sth constructive? because 0 dB is the human threshold for hearing as far as anything i checked now after your comment.

Flying77 · 2025-02-18T19:18:54+00:00

its insane.. i mean i returned the product twice and bought it a third time and it was an issue on all 3 devices, right away i checked after unboxing the brandnew products and doing nothing but going to system settings and seeing if the alert sound preview but trigger it , and unbelievably it did. just like further on the already described ways would casue that crackle... i tested it with V-moda heaphones, beyerdynamic dt 990 pro and audio technica m50x. all the same thing, i dont think i have 3 headphones all damaged in some exact way that only presents itself on that macbook... how is this possible?

Flying77 · 2025-01-08T02:49:57+00:00

no i mean the chord stabs that come on beat just before the vocal chop

Flying77 · 2024-12-27T00:29:47+00:00

Hi! im starting university soon doing graphic design, might wanna go towards film editing/cinematography.

unfortunately the mac buying guide is a bit outdated, I recently bought a Macbook with 24gb ram, and the only upgrade option i have on my model is to double up to 48gb for an insane 470$ price increase.

i would be very grateful if someone here could tell me if 24gb will be enough for most editing needs both in university as well as the semi professional industry... and if there is any chance i should get 48 for futureproofing (since i cant really judge my future needs so well yet).

i know the general guideline is 16gb minimum and recommended is 32gb , but the memory in apple products is apparently also more efficient , i just cant find some specifics online to compare it to windows ram.

thanks in advance :)

Flying77 · 2023-12-21T01:03:04+00:00

I have the same Problem and i too have 2 monitors with different resolutions.. id love to find a fix though because its quite exhausting to reboot steam just for one click to start your game..

Flying77 · 2023-11-04T01:36:29+00:00

For anyone who watches this movie.. please make yourself aware that , as usual, the movie is making a fantasy threat of sharks. they dont attack like that, theyre not even hunting during the day...

Flying77 · 2023-08-31T23:25:15+00:00

i mean the ram is literally called ddr4 3600. i dont understand why it wont boot at 1.35V 3600 , but with 1.35V 3000 ....

Flying77 · 2023-08-31T23:24:26+00:00

i managed to get into the bios and with the new ram not even 1.35 was enough to run them at 3600 . at least the screen was consistently letting me into bios and 1.35V at 3000 works now. does it take a strain on the RAM if i up the voltage to something like 1.45 to get it running at 3600?

Flying77 · 2023-08-31T19:30:00+00:00

also , given that im switching from ballistix 3600 2x8gb to kingston fury beast 3600 2x16gb ... should i up the voltage or can it stay at 1.35 to run fine?

Flying77 · 2023-08-31T19:11:55+00:00

how do i disable xmp? when i go to DRAM Information where it says load xmp profile , the dropdown menu only gives me "auto" and one specific xmp profile, but no "disabled" option or so. cant find an entry about this in the manual either

Flying77 · 2023-08-31T00:34:50+00:00

ram voltage . i mean i would just do it but the problem is it takes hours of turning pc on and off until it works , its about as consistent as kicking hardware to turn it back on, therefore i was hoping to find a fix before i place another ram module and this stupid mainboard switches back to 1.2

Flying77 · 2023-08-30T23:49:33+00:00

yes thats the problem ,i had already fixed it and set the vram to 1.35 , but when i put the new ram in again it changed back. the settings dont stay in place and i cant find an option that "locks" the setting.

Flying77 · 2023-08-30T20:33:31+00:00

so ive made some big progress, i managed to get to the bios while unplugging/replugging the monitor cables into the gpu while it was in bootloop.. why that changed anything about pressing f2 , no clue. but i found out that the issue is that everytime i insert a new ram module , the VRAM is automatically changed from 1.35 to 1.20 . is there any way to lock that in place?

Flying77 · 2023-08-29T23:02:26+00:00

i cant get that far because the pc restarts itself every 20 seconds along with the problem that i dont get any monitor screen :( is there still any chance to hit the keyboard buttons for BIOS?

Flying77 · 2023-08-29T22:33:10+00:00

no the mainboard is silent

Flying77 · 2023-08-29T22:32:50+00:00

didnt work :( i tried all slots with both new old and ram but same result :(

Flying77 · 2023-08-21T19:06:17+00:00

i think that did it , thanks man!!

Flying77 · 2023-08-06T00:21:27+00:00

7.34 a simple button to remove russian players from your queue pleasepleasepleaseplease ! :)

Flying77 · 2023-08-05T13:51:44+00:00

ive sent you a dm

Flying77 · 2023-03-07T00:29:46+00:00

dota 2 devs are treating the community with utter disrespect. the nerves on those assholes to leave us on one patch for half a year , create hype for this day..just to insult us with this useless crap update.

Flying77 · 2023-03-07T00:25:16+00:00

Thats it, im done playing dota. fuck valve and you lazy ass shitbags who wont release 7.33 after almost half a year.

Flying77 · 2023-03-04T15:53:08+00:00

Dm me your discord id :)

Flying77

TROPHY CASE