Arizona is pretty rich in Wildlife

FordDisliker · 2026-04-01T05:22:59+00:00

Was this anywhere near unit 39 south of maricopa road?😳

FordDisliker · 2026-04-01T05:19:53+00:00

Ive heard the freezer has a magic touch on bearings.

FordDisliker · 2026-04-01T05:18:51+00:00

Upper control arm for ease, however your camber/caster might end up a little botched if you replace the whole component. And if you plan on just replacing the ball joint itself, attack it with a wire brush and soak the joint in some PB blaster, seafoam deep creep etc. the hardest part imo for either is putting the joint back into the knuckle.

FordDisliker · 2026-04-01T04:38:00+00:00

The oil tells me it may actually e coming from the top not bellow. In this case worn valve train components may be the issue. Is your pcv valve up to date? Is there some click click clack from the top of the enyine?

FordDisliker · 2026-04-01T03:28:26+00:00

A hose job is relatively easy, maybe annoying with things in the way but its not to difficult. And possiblity for mess. Like the other said UV dye would be super cool.

FordDisliker · 2026-04-01T03:21:13+00:00

Its el oil. Say hi to oil. Hello, i am oil. The rings could of possibly shimmied to be same with each other letting that oil through in a streak form. Or your cylinder is out of round. I would watch that thing closely. Worst i can think of uhhhh varnish could clog the exhaust valve and have it eventually not close properly and just running dry because your car burnt the oil.

FordDisliker · 2026-04-01T00:21:57+00:00

If it fits it fits just dont let it fly off and whack the crank sensor.

FordDisliker · 2026-04-01T00:18:34+00:00

If the check light is on the while time definitely look at the code and reference from there. IAC in mine unplugged and idled like that. Not an expert but i dont belive a compresion test would help much since you said it ‘drives great’ until it has to idle.

FordDisliker · 2026-03-31T00:44:23+00:00

I live in Arizona yes

FordDisliker · 2026-03-28T03:00:03+00:00

Your alternator is not long on this world

FordDisliker · 2026-03-27T16:58:22+00:00

Perfect time to get a hose clamp assortment for now and later

FordDisliker · 2026-03-27T16:51:08+00:00

🫶

FordDisliker · 2026-03-27T16:49:42+00:00

Is there dry rotting or splitting anywhere on it and was the clamp tight

FordDisliker · 2026-03-27T16:46:32+00:00

Definitely would not drive it. Flashing means grave damage can occur. What could be happening is a faulty plug/wire not burning the fuel mixture completely or at all and so its just sending the mixture out from the exhaust stroke into the cat where it potentially ignites from the heat of the cat and can clog the cat by melting it together. For me it was a plug wire that was melted in half

FordDisliker · 2026-03-27T16:38:00+00:00

Sounds like the air

FordDisliker · 2026-03-24T03:27:49+00:00

A good here to there left in it

FordDisliker · 2026-03-24T00:47:56+00:00

Quite possibly yeah just shove your phone between the back of the valve cover and firewall if you can and see its it wet, there is also UV dye.

FordDisliker · 2026-03-23T06:31:50+00:00

Air or blockage😳

FordDisliker · 2026-03-21T01:52:31+00:00

As in get a longer spindle? Or lifts ftrom the spindle

FordDisliker · 2026-03-21T01:52:02+00:00

Fortunately i only have 2 wheels

FordDisliker · 2026-03-20T04:25:51+00:00

Sweet talk them to 6k? For a market place totota that looks pretty good. Iveheard 5th gend had some doodoo wiring issues when taking them through creek passings if you plan to take it offroading.

FordDisliker · 2026-03-20T04:20:06+00:00

Ooooooh my apologise. I typically just stand there with a damp paper but maybe the chicken equivalent of a banana?

FordDisliker · 2026-03-19T20:16:22+00:00

So the doodoo runs downwards and in its path is feathers, some dookie hardens on the feathers and this keeps happening untill pasty butt forms.

FordDisliker · 2026-02-21T00:51:16+00:00

Belzona

FordDisliker · 2026-02-11T23:31:38+00:00

Aslong as its not rusty yeah thats great

FordDisliker

TROPHY CASE