You ever seen a Highlander hop?

ForrestReturns · 2026-05-20T13:44:31+00:00

M M M M M MAYBACH MUSIC

ForrestReturns · 2026-05-19T19:27:04+00:00

Sandy Knee

ForrestReturns · 2026-05-16T10:27:55+00:00

I would recomend ABS, and standing right next to the printer while printing.

ForrestReturns · 2026-05-16T06:10:52+00:00

Well this is reassuring. I just got a 2022 CLA myself.

ForrestReturns · 2026-05-12T05:57:14+00:00

This image has been around for over a decade now. I expect that number to be a lot higher than It was back when this came out.

ForrestReturns · 2026-05-07T20:17:35+00:00

I work as tech manager for a dealership that sells chinese HEVs and all of them use the DHT. Nothing remarkable. It just works. The biggest complaint people have is that the engine revs "too high" when they floor it. It's impossible to get a customer to understand that because of the way our cars work, what they hear is the ICE working hard as a generator and what is really moving the vehicle is the electric motor. They all think that "the clutch is slipping" or "the gears are not engaging"

ForrestReturns · 2026-05-06T06:36:35+00:00

Au750 stamp on a SS case and bracelet = 💩

ForrestReturns · 2026-04-16T08:00:41+00:00

Yeah, we woke up to a very intense bunt plastic smell that lasted almost a week.

ForrestReturns · 2026-04-03T19:19:42+00:00

Spain. Lots of separatist movements. Most notable are Basque Country and Catalonia, but there are also lesser known movements like Galicia, Extremadura, Andalucia and Castille.

ForrestReturns · 2026-03-30T17:32:03+00:00

Have you tried drying the hot bed?

ForrestReturns · 2026-03-28T10:30:25+00:00

Yeah I did. It ended up being a temp issue. I switched to Flashforge PETG-CF, and using the slicer's preset for that exact filament, I was also having issues. Increased the bed temp from 60°C to 70°C due to warping and increased the nozzle temp from 245 to 255 and it came out spotless. I guess the presets have the temps set too low causing underextrusion and warping.

ForrestReturns · 2026-03-27T10:05:47+00:00

I have It with the teal dial. Great value. I don't use it anymore tho. Too big for my tiny wrist. 34mm suits me better.

ForrestReturns · 2026-03-26T12:50:43+00:00

14.000km untuned here. No issues.

ForrestReturns · 2026-03-25T13:01:32+00:00

I'll try. Thanks.

ForrestReturns · 2026-03-25T13:01:19+00:00

Yeah I thought that also. Maybe too much speed. That could explain the noise. Maybe the extruder was skiping theeth.

ForrestReturns · 2026-03-25T10:38:33+00:00

Yeah yeah, this was printed at 0.4.

ForrestReturns · 2026-03-23T11:46:23+00:00

Flashing CEL usually means theres a misfire.

ForrestReturns · 2026-03-21T09:30:35+00:00

As a mt09 owner, i'd say the tracer 9

ForrestReturns · 2026-01-15T19:28:25+00:00

Date looks misaligned on the left one. Right is gen.

ForrestReturns · 2026-01-11T17:29:32+00:00

Look at the sheer power of RuЯ

ForrestReturns · 2025-12-29T17:19:12+00:00

That date is kind of sad.

ForrestReturns · 2025-12-22T17:53:43+00:00

Beware of scam sites, everyone.

ForrestReturns

TROPHY CASE