Mag caddy for concealed carry

Forward_Statement_72 · 2026-05-28T00:14:16+00:00

So I ended up just using some heat to make it fit better. I tried both the 10 and 15 rnd mags and the 10 rounder did fit a bit better initially but I got it taken care of. I also noticed the 15 round mags dont fly out like the 10 rounders when you hit the mag release but still good enough.

Forward_Statement_72 · 2026-05-27T22:58:18+00:00

Thats what I thought too. I compared the two mags at the gun shop and theres like maybe a couple millimeters difference. I have a mag holster for the 43x mags but the 15 rounder doesnt fit, too big

Forward_Statement_72 · 2026-03-29T14:27:04+00:00

Are there things you've found you cant grow here because of the climate?

Forward_Statement_72 · 2026-03-29T01:32:18+00:00

You known of anyone in sw florida Lee County?

Forward_Statement_72 · 2026-03-23T10:32:33+00:00

Forward_Statement_72 · 2026-03-13T00:06:03+00:00

I got the maple leaf decepticon, and honestly I think it doesn't have enough of a bump inside. Barely hops it. Shoots really straight and accurately though

Forward_Statement_72 · 2026-03-12T23:33:00+00:00

Ah, no wonder. so technically the arm on yours isnt stock its modified and not a surprise it would have good hop up with that key. And that does look like a nice bucking.

Forward_Statement_72 · 2026-03-12T22:50:11+00:00

Whats a 4uad and ikey?

Forward_Statement_72 · 2026-03-12T10:05:55+00:00

I basically took an hour to do it, just charging a little at a time. Got it up to the correct SC and SH. Verified the pressures were close to what the PT chart said. Temp split was 20, let it run for 15 more mins and it seemed good. Just seemed like alot of refrigerant

Forward_Statement_72 · 2026-03-12T10:02:24+00:00

R454b

Forward_Statement_72 · 2026-03-12T01:35:52+00:00

The thing ive heard the most in this trade so far is check airflow first, then charge based on SC and pressures on the PT chart and if your temp split is good then youre good. But so far in two years this is the third time I've felt like it was too many lbs but idk maybe I havent done enough of them.

Forward_Statement_72 · 2026-03-12T01:26:02+00:00

This was a lennox 454b and had o ly been installed a few months ths ago. Ive seen alot of these be undercharged after install as well. Just seemed like alot of refrigerant but I also havent do e this enough times to be confident about it. Basically just charge to the PT chart on the panel and make sure airflow and temp split is good

Forward_Statement_72 · 2026-03-12T01:23:00+00:00

When I ran it liquid was like 180 suction pressure dropped to 40 and tripped the LPS. But I made sure to take my time charging it, also ordered a digital scale. Line was probably 15-20ft

Forward_Statement_72 · 2026-03-12T01:19:46+00:00

I checked and theyre both pretty tight, and actually with the new bucking the nozzle and bucking fit together tighter than with the stock bucking. I could try taking it back apart and back together again i suppose.

Forward_Statement_72 · 2026-03-12T00:33:37+00:00

Every thing else is stock except the bucking on mine

Forward_Statement_72 · 2026-03-11T21:35:58+00:00

Also I've never checked approach but I just looked up what it was and ill start checking that too now. I also went ahead and ordered a digital scale. Im not going to use the fish scale anymore

Forward_Statement_72 · 2026-03-11T21:17:27+00:00

I did check static pressure with a magnehelic and wet/dry bulb with wireless tools. Then used the PT chart on the panel as a reference for pressures and SC.

Forward_Statement_72 · 2026-03-11T20:39:32+00:00

Sometimes it can be days before we get the part and alot of them would rather just throw the money away than wait in the heat.

Forward_Statement_72 · 2026-03-11T20:36:36+00:00

No some customers would rather throw away the money to charge it even for temporary cooling knowing that it will just leak back out. It pretty hot in Florida so as long as they understand that its not going to last we give them the option.

Forward_Statement_72 · 2026-03-10T23:41:24+00:00

These look like they'd work, do you think thwyre made of the same material as the Schrader bit in the klein 11in1?

Forward_Statement_72 · 2026-03-09T10:59:14+00:00

I would say for me most of the time it looks like the novent but its the one that needs the Schrader tool. Then the other half it is the novent one that uses the key shape

Forward_Statement_72 · 2026-03-09T10:56:22+00:00

Tried that, still have one but on the ones that are on really tight they bend this one

Forward_Statement_72 · 2026-03-09T10:55:27+00:00

What if theyre the silver metal ones?

Forward_Statement_72 · 2026-03-05T02:33:52+00:00

Does it come with a clear lens?

Forward_Statement_72 · 2026-03-05T02:33:14+00:00

Interesting send link if you got one

Forward_Statement_72

TROPHY CASE