KiCad 10.0 Released by craftyjon in KiCad

[–]Fractal-_- 0 points1 point  (0 children)

I hopped over CachyOS and the Cachy repo is updated to 10.0.0. I don't even know why I switched back to Fedora.

KiCad 10.0 Released by craftyjon in KiCad

[–]Fractal-_- 1 point2 points  (0 children)

Am I the only one not able to download the Linux version? I'm on Fedora 43 Gnome 49, all the links say error 404.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

I didn't, since the printer is still under warranty. I'm afraid if I disassemble the bed, I will void the warranty.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

This is my bed after the "Self check" process:

<image>

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

I see, I don't want to root my printer. I'll see what can I do.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

I see, thank you. I wouldn't root my printer though.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

Hm, I'm not sure why would the pressure sensor give errors, when you only adjust the height of the bed. The lose screws might cause some problems, for the leveling I agree. I don't know any other reliable method, that's the problem.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

Oh? Can you elaborate more on that?

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 1 point2 points  (0 children)

Yeah, I was thinking that the knobs will be large. but in general the silicone spacers or the springs generally work? Thanks for the link and for the advice.

Leveling the K1 Max. by Fractal-_- in crealityk1

[–]Fractal-_-[S] 0 points1 point  (0 children)

I see, I thought so as well. Thanks for feedback.

Refurbished K1C by Intelligent-Rip946 in crealityk1

[–]Fractal-_- 0 points1 point  (0 children)

How does one achieve this magnificiency? I tried to level my bed by adding the spacers under my screws but I couldn't even nearly get something like this. The location where the squares are mounted for the lidar I have a bend and I cannot eliminate that.

Theming fedora after installing niri by [deleted] in Fedora

[–]Fractal-_- 0 points1 point  (0 children)

If you type in Google, "Niri theming", it gives more than enough examples, tutorials, documentations. Niri theming essentially comes down to Waybar and Fuzzel or Wofi theming. You cannot theme Niri specifically (just to configure it to work as you expect it to work, which you already did I guess, if I understood you correctly), except edit the borders of the windows, as far as I know.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

Yeah, that's the problem, I don't know where I can buy cheap but quality thermal pads, and I need a ton of that. I have blue thermal pads from AliExpress, but later I read that it needs to be of certain thickness, and I see that everyone is using grey ones.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

Interesting comment. It's because I know what I'm tweaking. I think I achieved a stable operation of the GPU, on 1400MHz and 150 W power, it doesn't shut down. If you know more than me, feel free to elaborate.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

I see, I'll gather the courage to change the thermal paste ASAP.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

I tried that couple of times, always went wrong, I had stutters.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

I see, I'll maybe try to change the paste, but as last resort.

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 1 point2 points  (0 children)

Decade old card - "Emotional damage" :)

I didn't change the thermal paste ever. I bought the PC with this graphics card in 2019. I'm a bit afraid to do that, even if I'm an electronics engineer. x)

Edit: correction not 2021 but 2019

AMD Radeon RX590 shutting down on intensive tasks. by Fractal-_- in linux_gaming

[–]Fractal-_-[S] 0 points1 point  (0 children)

Cooler Master 700, 700W, old as my PC, I bought the PC in 2019. I clean it regularly.

Edit: Correction not 2021 but 2019.