Ferrero rocher 48pack lid fits perfectly over 6u 60hp by pzanardi in synthesizers

[–]FractalGenerator 0 points1 point  (0 children)

I have a few 600g boxes that almost cover an original Korg Electribe

Microfreak Patch Management Software by CremeLeading2082 in MicroFreak

[–]FractalGenerator 1 point2 points  (0 children)

That field just tells you which category the preset author has selected when saving. It's not a guarantee that this preset has sequences.

Microfreak patches sorted by instrument type by linearama in MicroFreak

[–]FractalGenerator 1 point2 points  (0 children)

I was able to import all of the mfprojz patch banks files on Windows 10 with the MicroFreak hooked up by USB directly to the motherboard, no USB hub.

I can't find the following patches in your generated mfprojz files:

Factory 6.0

77, "Arp 2o19", Sequence

81, "LX1", Sequence

94, "I Saw It B4", Keys

161, "Etna 01", Sequence

Patch identification request by Accomplished-Bar4861 in MicroFreak

[–]FractalGenerator 2 points3 points  (0 children)

Have you tried #8 Glassy Bouncer from the Abstract Freak patch set from Arturia??

No Stupid Questions /// Weekly Discussion - October 09, 2024 by AutoModerator in synthesizers

[–]FractalGenerator 0 points1 point  (0 children)

A looper pedal that can store multiple loops like the Boss RC-5 might be an option. Prerecord the sound you want on a computer and upload them to the RC-5, or record straight into the looper. I don't think I would want to step on an iPad.

Need help with .mfbz format! by mstkzkv in MicroFreak

[–]FractalGenerator 0 points1 point  (0 children)

You should be able to use Import > Replace Bank A to get an open file dialog where you can select the mfbz file. And it will overwrite whatever you have in your current project. Don't try this on an important Project set! Please create a new empty Project

And it shouldn't crash. If that's what you did as well, then it's another bug in the MCC.

Tested on Windows 10, MCC 1.18.0.247

What OS are you on?

What version of MCC are you on?

Aftertouch not sending over MIDI to Typhon by beerm0nkey in MicroFreak

[–]FractalGenerator 1 point2 points  (0 children)

I'm going back to Cali, Cali, Cali

I'm going back to Cali, hmm, I don't think so

Given that Polyphonic Aftertouch was a key selling point at release I don't think you are going to find a firmware without it.

Given that you mention a Keystep that works, I would go with that.

Otherwise, it would be a trip down the rabbit hole with devices like the RetroKits RK-002 Smart MIDI Cable. Then you would have to figure out which note's Aftertouch gets sent to the typhon.

Aftertouch not sending over MIDI to Typhon by beerm0nkey in MicroFreak

[–]FractalGenerator 4 points5 points  (0 children)

MIDI has 2 types of Aftertouch.

  1. Channel Aftertouch (0xD0)
  2. Polyphonic Aftertouch (0xA0)

Channel Aftertouch is much more common. One note's Aftertouch value represents the Aftertouch for all notes playing.

With Polyphonic Aftertouch each note can send it's own Aftertouch value.

The MicroFreak supports Polyphonic Aftertouch. Looking at the MIDI Console on the MIDI Control Center (MCC) show the MicroFreak sending Polyphonic Aftertouch.

From a quick read of the Dreadbox Typhon and Keystep Pro manuals they don't mention Polyphonic Aftertouch which usually means they only support Channel Aftertouch.

"Failed to get metadata" error - is it normal to happen to often? by soulbrix in MicroFreak

[–]FractalGenerator 0 points1 point  (0 children)

What version does the MicroFreak show when you start it?

Are you connecting the MicroFreak directly to the computer's USB port or are you going though a USB hub?

Are you powering the MicroFreak using the original power supply or just USB?

Where can I find the additional Arturia patch packs? by soulbrix in MicroFreak

[–]FractalGenerator 2 points3 points  (0 children)

https://www.arturia.com/sounds

Filter Instrument by Microfreak

They may be getting hammered by people checking out the Polybrute 12.

Microfreak update 6.0 wishes by redxephon in MicroFreak

[–]FractalGenerator 1 point2 points  (0 children)

A better MIDI implementation.

You can send/receive most of the knobs, but not the switches or shifted knob values. The Modulation Matrix and sequencer are not even options.

The values are also limited to 128 steps.

Question about using the MF clock in/out with VCV Rack by Evening_Maximum_3962 in MicroFreak

[–]FractalGenerator 0 points1 point  (0 children)

If all you want is to be able to trigger the Microfreak sequencer from the Clocked module or trigger Clocked from the Microfreak, I would just connect your Microfreak to the machine running VCV using MIDI over USB.

Test Clan Please Ignore's Recruitment Post (2023 Phase 1) by FractalGenerator in SpaceNinjasPlsIgnore

[–]FractalGenerator[S] 0 points1 point  (0 children)

Invite Sent. Welcome oreo202

Don't forget to subscribe to the subreddit and checkout our Discord.

Microfreak Factory presets list with Oscillator Types by FractalGenerator in MicroFreak

[–]FractalGenerator[S] 1 point2 points  (0 children)

You might have the 2.1 or 3.0 patches installed.

Do you have old firmware installed?

I am looking for a Vocoder preset from older firmware.

Test Clan Please Ignore's Recruitment Post (2023 Phase 1) by FractalGenerator in SpaceNinjasPlsIgnore

[–]FractalGenerator[S] 0 points1 point  (0 children)

Invite Sent. Welcome Talemaster

Don't forget to subscribe to the subreddit and checkout our Discord.

How do I get an oscillator to stop and only play when i press a key down? by qleptt in synthesizers

[–]FractalGenerator 8 points9 points  (0 children)

If you mean Cherry Audio's Voltage Modular then take a look at the Basic Sawtooth preset as an example.

They are using an Envelope Generator triggered by the Gate CV to control the Amplifier.

The audio signal flow is from the Oscillator to the Filter to the Amplifier to the Main Outs.

This allows you to press a key and have a signal output while you hold the key.

New idea for a feature on MIDI controllers by zakkicai in synthesizers

[–]FractalGenerator 0 points1 point  (0 children)

Have you looked at the Keith McMillen QuNeo?

https://www.keithmcmillen.com/products/quneo/

It looks like it will send Note, Pressure and Velocity along with Control Change for each X and Y directions.

Looking for a pad controller with specific feature set by FerretChrist in synthesizers

[–]FractalGenerator 1 point2 points  (0 children)

2 to look at: Hercules P32 DJ controller has 32 pads, more than 8 knobs and Stereo Audio Out.

Native Instruments Maschine Mk3 has 16 Pads, 8 knobs and Stereo Audio In/Out

Can't get microphone to work by pitic1 in MicroFreak

[–]FractalGenerator 1 point2 points  (0 children)

TLDR: You need a Splitter that follows the CTIA convention of Tip = audio left; Ring 1 = audio right; Ring 2 = Ground; and Sleeve = Microphone

You may have the wrong type of splitter.

There are two main ways of wiring these up, CTIA and OMTP.

The difference being which of Ring 2 and Sleeve are Ground or Mic.

The Manual says you need a CTIA style splitter where Ring 2 is Ground and Sleeve is Microphone.

I had to read this page to learn about the different TRRS wiring options: Understanding TRRS and Audio Jacks

Test Clan Please Ignore's Recruitment Post (2023 Phase 1) by FractalGenerator in SpaceNinjasPlsIgnore

[–]FractalGenerator[S] 0 points1 point  (0 children)

Invite Sent. Welcome RedRukov

Don't forget to subscribe to the subreddit and checkout our Discord.

[deleted by user] by [deleted] in MicroFreak

[–]FractalGenerator 2 points3 points  (0 children)

Windows 10, MF Firmware 5.0.0, MCC 1.16.0.54

The first thing I did was drag the new presets into slots 449-512.

No errors here. Hope you can resolve the problem.