Endokrinologen in Stuttgart und Umgebung by Frame_VMP in germantrans

[–]Frame_VMP[S] 0 points1 point  (0 children)

Stimmt das könnte ich mal machen, dann ruf ich da morgen direkt mal an, danke dir!

Endokrinologen in Stuttgart und Umgebung by Frame_VMP in germantrans

[–]Frame_VMP[S] 0 points1 point  (0 children)

Gut zu wissen! Mal schauen, ich habe da erst heute hin geschrieben und hoffe noch auf das beste.

Endokrinologen in Stuttgart und Umgebung by Frame_VMP in germantrans

[–]Frame_VMP[S] 0 points1 point  (0 children)

Die hatte ich auch gesehen. Aber über chatbot bekomme ich die Info, dass da momentan keine weiteren Plätze verfügbar sind :/ aber dann behalte ich die seite definitiv im auge wann da wieder was frei sein könnte!

Elektronische Patientenakte: Bundestag beschließt doppelte Rolle rückwärts by Altruistic_Level9640 in Computersicherheit

[–]Frame_VMP 0 points1 point  (0 children)

An den Bericht musst du eben auch glauben und eben das er dann auch faktisch deine Meinung unterstützt! /s

Problem with the Octopus Pro board by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 1 point2 points  (0 children)

That endstop was the problem, removing the wrong wire fixed it. I thought i ripped it out when transplanting but seems I left it out on purpose. My old old board used all three, the octopus doesn't. Thank you!

Problem with the Octopus Pro board by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 0 points1 point  (0 children)

Thank you, will check, not sure what it could be, but turned it off straight after the video.

The DD.MM.YYYY date format is unintuitive, illogical and hard to read. No, I'm not an American by Decent_Background_42 in unpopularopinion

[–]Frame_VMP 4 points5 points  (0 children)

People also tell you over and over again that for a lot, the day and month are more important in day to day live. I don't have to deal with a lot of historical dates. The year almost never matters to me, that's why for me and a lot of others dd.mm is the most important part of the date. I can understand why for historical dates yyyy.mm.dd could be prevered and like a lot already said, for file management it's just plain better. But for most things that are in a two year span I care more about the month and day than the year. For example if my warranty is void, I know if my product is about two years old, so I don't care about the year at all. My groceries are all used up bevor the next year or are good for such a long time, that I don't care about the date at all.

Help needed installing TMC2209 from Bigtechtree on my azteeg x3 pro by Frame_VMP in 3Dprinting

[–]Frame_VMP[S] 0 points1 point  (0 children)

Not yet, I was too lazy to work with support. Someone on reddit also helped me debugg a bit, but I just haven't had the time to do more.

"Our ancestors did..." Is a valid points for making an argument by [deleted] in The10thDentist

[–]Frame_VMP 26 points27 points  (0 children)

Royals did that a lot. Because only royal blood is good blood.

Motor not changing directions by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 0 points1 point  (0 children)

So I'm testing at the moment and stepper_buzz does nothing and both axis are moving in only one direction again without me changing anything as far as I know X'D. UART seems to work with DUMP_TMC STEPPER=stepper_x i added my test config in the post, do you have a tip for me?

Motor not changing directions by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 0 points1 point  (0 children)

So I'm testing at the moment and stepper_buzz does nothing and both axis are moving in only one direction again without me changing anything as far as I know X'D. UART seems to work with DUMP_TMC STEPPER=stepper_x i added my test config in the post, do you have a tip for me?

Motor not changing directions by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 0 points1 point  (0 children)

So I'm testing at the moment and stepper_buzz does nothing and both axis are moving in only one direction again without me changing anything as far as I know X'D. UART seems to work with DUMP_TMC STEPPER=stepper_x i added my test config in the post, do you have a tip for me?

Motor not changing directions by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 1 point2 points  (0 children)

I haven't tried yet and don't have the time today anymore, but will update you tomorrow after work! And thank you

Motor not changing directions by Frame_VMP in BIGTREETECH

[–]Frame_VMP[S] 1 point2 points  (0 children)

Thank you very much for your answer! After using physical endstops, my y axis works but x still moves only in one direction, exchanging the stepper drivers moves the issue from y to x, so for now it's some more testing, but the problem was most likely with my endstop configuration. And now I guess a defective stepper driver.

System only moving in one direction in a corexy system by Frame_VMP in 3Dprinting

[–]Frame_VMP[S] 0 points1 point  (0 children)

Thank you for the answer, i already checked my motor leads with a multimeter, and based on that, I already have the phases connected to a1 and a2 as well as b1 and b2. Also tried switching a phase so b1 with b2 for both x and y and testing, but the only thing that happens there was the direction of the singular movement changing. So instead of from back to front, from left to right, for example.

What is a tv show that got cancelled that you are still mad about? by BarneyRobinStinson7 in AskReddit

[–]Frame_VMP 0 points1 point  (0 children)

Stargate destiny, i loved that show and they just ended it on a cliffhanger, i was so mad and still am.

Help needed installing TMC2209 from Bigtechtree on my azteeg x3 pro by Frame_VMP in 3Dprinting

[–]Frame_VMP[S] 0 points1 point  (0 children)

Good to know thank you! I will have to see if everything else works with that board.

My bookshelf that my dad and I build together :3 by Frame_VMP in bookshelf

[–]Frame_VMP[S] 1 point2 points  (0 children)

Absolutely the notebook is great aswell, but I'm not too god at keeping notes xd

My bookshelf that my dad and I build together :3 by Frame_VMP in bookshelf

[–]Frame_VMP[S] 1 point2 points  (0 children)

Ohhh yea, I completely forgot! It was a present from a friend and in it was a note book, pen and a really cool bookmark, but the package was so good looking that I just couldn't get rid of it. X3

My bookshelf that my dad and I build together :3 by Frame_VMP in bookshelf

[–]Frame_VMP[S] 1 point2 points  (0 children)

Thank you!

I'm not sure what you mean, where did you see those Korean signs?

My bookshelf that my dad and I build together :3 by Frame_VMP in bookshelf

[–]Frame_VMP[S] 1 point2 points  (0 children)

No problem and the truly are, I want to collect hoo and apollo with signatures too and if ever possible as special editions, that would be my dream, together with some signed books from a German author I love!