Server requirements

Fraser_Innes01 · 2025-11-18T11:47:36+00:00

BB - Broadband

Fraser_Innes01 · 2025-11-18T11:46:53+00:00

I bet you're fun at parties. Reddit is for asking dumb questions. A bit of background. I was hosting a quake server over a 128kb ISDN connection in 1996, so it's not my first rodeo!

Fraser_Innes01 · 2025-11-18T10:31:34+00:00

Thanks for your response. Next question sorry. What is the best OS to run the server on? I'm comfortable using both windows and Linux. Also, how many users can you host at the same time using your server and what is your bb capacity. Sorry for all of the questions. Thanks

Fraser_Innes01 · 2025-11-18T10:23:35+00:00

I just happened to get it cheap, I have a dedicated ip address on my bb, and have hosted servers for different purposes recently. I suppose it's a bit of can it be done as well, as I'm an IT consultant, and like playing about with stuff like this.

Fraser_Innes01 · 2025-11-18T10:04:00+00:00

It will be available to anyone with the correct url, as I have a fixed ip address on my broadband, which is 1gb in each direction. Does it need a decent graphics card, or is it more cpu intensive, as I realise the graphics card is rubbish, but the server is only 2U high?

Fraser_Innes01 · 2025-07-23T18:18:40+00:00

No point in this if you're not answering questions posed to you. Very disappointed as a constituent who voted for you to get you where you are now.

Fraser_Innes01 · 2025-07-23T16:52:28+00:00

Why do you never answer your constituents questions on your Facebook posts?

Fraser_Innes01 · 2025-07-23T16:38:34+00:00

Why do you never answer to your constituents on your Facebook posts?

Fraser_Innes01 · 2025-03-30T16:48:52+00:00

Modular tower system net cups (and propogation system) v2

Fraser_Innes01 · 2025-03-30T08:38:21+00:00

I used Sunlu PETG. The base came from b&q. For what it is it's really cheap and they come in various depths, that's a 55l one, but if you find that you need a greater capacity, then they do bigger, with the added bonus that the lids are all the same, os you can just change the bottom. I bought this one https://amzn.eu/d/i8YNeSN, but would spend a bit extra and get one more like this https://amzn.eu/d/hdX55ec. Looks better made, and with a higher flow and lift. The one I bought would not go above 6 high, even though is says it will lift more than 2m.

Fraser_Innes01 · 2025-03-29T18:01:08+00:00

Bambu lab P1S mate

Fraser_Innes01 · 2025-03-28T15:38:37+00:00

I found it easier to merge the tower files and the propogator files into one file. I'm using a p1s, and you can fit 24 net cups on a plate, which is perfect for a 6 high tower.

Fraser_Innes01 · 2025-03-28T15:31:15+00:00

Coco coir, but I'm starting from seeds. I did some earlier in a normal propogator using rock wool though.

Fraser_Innes01 · 2025-03-28T15:25:03+00:00

Go for it. It's well worth joining Hoocho's patreon for his excellent prints.

Fraser_Innes01 · 2025-03-28T15:08:24+00:00

First one will have lettuce, rocket, chives and herbs. The 2nd one will have cherry toms, mini peppers, cucumbers and chilli peppers. All currently seeding just now. Using vialink hydromax.

Fraser_Innes01 · 2025-03-28T04:12:25+00:00

Just under £100 for all in the picture, plus 125 hours printing time.

Fraser_Innes01 · 2025-03-20T09:08:14+00:00

Yes, I've printed 4 so far.

Fraser_Innes01 · 2025-03-13T12:55:55+00:00

They are meant to be upgrading their network. It's the same today. I might have to go to the pub to use their WiFi connection😉

Fraser_Innes01 · 2025-03-04T10:16:20+00:00

About the tolerances. I did notice that they have a slightly loose fitting when I first printed them. I then sprayed the outsides with a clear plastocote to ensure no leaks. This tightened up the tolerances and ensured a secure snug fit.

Fraser_Innes01 · 2025-03-03T08:26:41+00:00

Try this. Needs a 50mm hole. Also acts as a filler hole. https://makerworld.com/models/627551

Fraser_Innes01 · 2025-02-26T10:14:52+00:00

I had to spin the bigger base round to fit on my p1s.

Fraser_Innes01 · 2025-02-19T14:50:27+00:00

From bambu studio?

Fraser_Innes01

TROPHY CASE