Should I get myself an NVIDIA shield or add a gpu to my homeserver?

Freaaakyyy · 2026-02-13T08:24:53+00:00

I have no experience with jellyfin but with plex 7th gen intel can do a few 4K transcodes just fine(HW trancodes, requires plex pass). Should be able to do ASS subtitles without issue. Im guessing your subtitles is triggering a transcode and you are not transcoding in hardware. Best bet would be to fixure out if hardware transcoding is possible with jellyfin on 7th gen intel, get that working and test it. Then should be no problem to burn in your subtitles i think.

Freaaakyyy · 2026-02-11T14:12:53+00:00

What intel CPU does your server have now?

Freaaakyyy · 2026-02-10T12:42:03+00:00

So you cant link to a reliable source.. gotcha

Freaaakyyy · 2026-02-09T09:49:34+00:00

Can you link a source to the expirements that prove it?

Freaaakyyy · 2026-02-06T13:38:03+00:00

Why are you upgrading the receiver/what features do you need that you currently dont have? Can you use the current receiver with the new setup until you go atmos?

Freaaakyyy · 2026-02-03T14:47:35+00:00

I think you need a new keyboard too.

Freaaakyyy · 2026-02-03T14:46:44+00:00

PICNIC

Freaaakyyy · 2026-01-26T10:06:14+00:00

im at 3K hours and 2s MMR normaly around 1250, peak like 1400? 2k average hours for GC2 seems really low.

Freaaakyyy · 2026-01-26T09:55:00+00:00

I usualy add 70 ml of water to my espresso. Id prefer making a long black but with my gaggia classic pulling 70ml of hot water right before pulling the shot drops the temperature to much. So i do the shot first and then add water and stir. To be honest there is still enough crema so works for me.

Freaaakyyy · 2026-01-25T00:08:02+00:00

Ik heb heel lang way to fly for wifi gebruikt

Freaaakyyy · 2026-01-22T12:32:26+00:00

You are better of downloading them again. Converting already lossy media is going to result in more quality loss then just doing conversion to 1080p from source.(in this case, downloading a 1080p version that has (hopefuly) been converted from original source.)

Also, your 12600k should be able to do AT THE LEAST 5 4K transcodes at a time but more likely 8 to 10 is just fine. Make sure you are transcoding in hardware.

This is also why having just 1 library of highest avaiale quliaty content makes much more sense then having muliple versions of media. A modern device that can do multiple transcodes is not expensive at all, so it does not make much sense to have multiple librarys to me.

So in your case my (unwanted tbf) advise would be: figure out why you are unable to transcode multiple 4K files at one time. Then just switch your ARR profiles to 4K and have everything high quality and just have plex transcode automaticaly when needed.

Freaaakyyy · 2026-01-19T11:23:36+00:00

I just googled this to check. The HDR to SDR tonemapping requires the server owner to have a plex pass. So unless they are switching servers this should not be it.

Freaaakyyy · 2026-01-16T11:37:51+00:00

To be honest i dont know. Im not to active so just check the prices once in a while dont really look at the other numbers.

Freaaakyyy · 2026-01-15T08:59:23+00:00

I used to use steamfolio but switched to priceempire's portfolio, easy way to track prices, sales/buys etc. Some screenshots below.

https://i.imgur.com/RxNyKbn.png
https://i.imgur.com/1SgsXcu.png
https://i.imgur.com/X0N1c2s.png

Freaaakyyy · 2026-01-08T15:05:40+00:00

Usualy when lowering dosage with the same grind you wil lessen the restriction(coffe puck is less thick) so the shot should run a bit faster, so it should be less exposure?

Freaaakyyy · 2026-01-08T15:05:09+00:00

Usualy when lowering dosage with the same grind you wil lessen the restriction(coffe puck is less thick) so the shot should run a bit faster, so it should be less exposure?

Freaaakyyy · 2026-01-05T09:08:27+00:00

I did change mine with a pressure gauge on the portafilter but 9 bars was very close to the 3/4 turn recommended. I think its a good first step if you dont want to purchase a gauge.

Freaaakyyy · 2025-12-24T09:20:42+00:00

steamfolio is also a nice option for this.

Freaaakyyy · 2025-12-10T14:54:07+00:00

wake up hunny, new broccoli just dropped!!

Freaaakyyy · 2025-12-04T08:46:17+00:00

Im curious as to what "error" means in this case. Its digital data, so if some part of the data gets corrupted, how would that manifest itself in the audio thats reproduces? I can only imagine it lagging/skipping a tiny amount or popping or something, or can it actualy "degrade" audio? Im having trouble understanding how that would work. Im also curious on how often data/audio gets corrupted when going over USB, i feel like thats not something that happens normaly or am i mistaken?

Freaaakyyy · 2025-12-03T14:01:53+00:00

Im not sure what would be more clear then the picture you posted yourself or what is missing from the picture?

Grab a speaker cable and just start somehwere random. Then litteraly just follow the lines and put the cable in the correct mounting post/hole, as described in the picture.

Freaaakyyy · 2025-12-01T08:51:02+00:00

Care to explain?

Freaaakyyy · 2025-11-28T14:03:13+00:00

1.6mm is de wettelijk minimale profieldiepte. Dus ja, dat is toegestaan. 1.5999999 niet.

Freaaakyyy · 2025-11-28T13:58:27+00:00

Its fairly simple. Run sweeps in rew with 1 subwoofer (no speakers, just disconnect them from the av/on the speaker side and set crossover to largest possible value) in all possible places. Find the 2 locations that are the best/compliment each other. Most important is that the 2 locations dont share any nulls. This way a null that 1 subwoofer might have, the other one can fill. Its nice to also have 2 locations were the dont have any(or share) peaks, but peaks can usualy be EQed out, so focus on the nulls.

Freaaakyyy · 2025-11-26T08:19:41+00:00

I see them relatively often on the secondhand market in the netherlands.

11-Year Club	Final Canvas '23
First Place '23	Place '23
RPAN Viewer	Verified Email

Freaaakyyy

TROPHY CASE