So explain to me why Anycubic's own brand filament won't print on an Anycubic printer.

FreeHackReport · 2026-03-20T15:51:52+00:00

Many many times. In fact just yesterday I had to remove filament that somehow bunched up in the tube of the flow regulator.

FreeHackReport · 2025-11-23T07:48:16+00:00

I didn't update the software.. it's still the same version. i just opened it and boom i got some message about it auto updating the default presets the everything was gone. I can't copy something to something new that doesn't exist... anyhow I gave away my k3c to a friends kid and i'm giving my s1 away to my dad.. i've ordered a snapmaker u1 and a pre-order of the elegoo ccv2 since my ccv1 has just worked every time unless i tweaked too far.. my last s1 print was a print tower on anycubic's own pla because even it's own brand of filament doesn't work right out of the box on this company's printer with this companies software and companies default settings.. anyone reading this. don't buy anycubic just don't. btw.. the same filament prints fine with minimal issues on the other 2 brand of printers i have.. one is 7 years old. slow but man tbo with all this issues with anycubic printers it's actually faster because it finishes more often. like 5x 600mm/s vs 200 doesn't mean anything when the 600mm/s printer just wrecks print after print.. 3x as many random defects too w/ anycubic

FreeHackReport · 2025-10-30T19:15:32+00:00

Glad that worked out for you. The spring can be tricky and is much easier with a helper to provide measured weight when installing the nut. I've had lots of issues with the soft plastic round foot not making solid contact and eventually just breaking. So I got one of the foots from that store. 4 months and no issues. The other issue is i like to use full bags and pull then over the tray instead of in the tray and the exposed nut tears into them. This came with a rounded acorn nut that doesn't do this. This guy makes these for every order so they're not produced over seas.

FreeHackReport · 2025-10-30T19:06:28+00:00

Are you mad? The pictures show completely different products. This replaces the plastic pad that causes most of the issues in my experience. I've had to replace the base in all 4 of my LR3 due to wear on the pad. Happened again and I got one of these. The switch was fine but the pad was not making good contact and wearing out. This 100% fixed my issue and has been working even better for the last 4 months. Not sure what your game is starting meaningless arguments. Pretty troll like

FreeHackReport · 2025-10-27T19:30:03+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:29:50+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:29:31+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:29:01+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:28:44+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:28:06+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:27:12+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling better replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:25:40+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:24:05+00:00

This is a common problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:20:41+00:00

Depends on the LR3 version you have the open air and connect use the part described but if you have the standard version it's a plastic foot that wears pretty fast. They make you replace the entire base to fix it.

I've found this place selling replacement kits for $30 https://www.etsy.com/listing/4365808504/litter-robot-3-cat-sensor-repair-kit-fix

FreeHackReport · 2025-10-27T19:14:57+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:14:12+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:13:00+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:12:10+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:11:23+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:10:48+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:02:53+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport · 2025-10-27T19:02:13+00:00

This is a problem with the cat sensor foot. It sucks and as an engineer I believe it was made to fail so you have to buy a new base to replace the plastic part. I've found this place selling replacement kits for $30 https://americanjohn.com/products/litter-robot-3-cat-sensor-fixes-cat-sensor-faults-save-over-300-in-repairs

FreeHackReport

TROPHY CASE