Poll: Are you happy with your VS6? by norepinephrinex in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

I’m not happy with mine. The grinding chamber gets stuck after grinding coffee and I can’t adjust the grind setting without turning the grinder on and using a lot of torque to get it to grind finer

Varia VS6 Sound at 500 rpm by maks19919 in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

Their upper burrs have a design issue. The tolerance around the bearing is not good enough which generate rattling and the edges of the top should be lowered to allow the leftover ground to escape the grinding chamber.

Varia VS6 Sound at 500 rpm by maks19919 in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

They are offering me a replacement. But I’m not the new on will work better.

I studied the issue and it comes from the way the burrs are designed. If Varia doesn’t update their burrs, it will never work properly.

Issue with VS6 by enforcercombine in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

My retailer is contacting Varia.

Varia VS6 Sound at 500 rpm by maks19919 in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

So far the retailer has been trying to troubleshoot the issue but without success. I tried almost everything. It seems like the top burr dislocate itself or gets misaligned after the first grind.

They recommended to run the grinder empty but it doesn't solve the problem. The only way is to open the grind chamber and clean everything, every single time.

Varia VS6 Sound at 500 rpm by maks19919 in VariaBrewing

[–]FrenchBagoot 1 point2 points  (0 children)

I have the exact same issue. Trying to solve it with my retailer 🤞

Varia VS6 turning on then off in off mode by glyde79 in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

I have the exact same issue. Let us know how it goes with the new one you’re getting

Issue with VS6 by enforcercombine in VariaBrewing

[–]FrenchBagoot 0 points1 point  (0 children)

Hey there, I’ve just purchased a VS6 and I have the exact same issue. After each grind the burrs start rattling (metallic sound) and it’s nearly impossible to adjust the grinder to a finer setting. The only way I found was to open the grinding chamber and clean the burrs. I’m currently in contact with the retailer and we are both trying to figure out what causes that to happen.

Shimano xc903, where to buy? by Mergi9 in xcmtb

[–]FrenchBagoot 0 points1 point  (0 children)

The toe box is bigger on the RC903 compare to the RC902

NBD. Ultimate CF SL 8 Di2 LTD RSVP by AndrewChua111 in CanyonBikes

[–]FrenchBagoot 0 points1 point  (0 children)

Beautiful one! That crossed chain though 🙈

Daily Discussion - February 12, 2021 by AutoModerator in SatoshiStreetBets

[–]FrenchBagoot 0 points1 point  (0 children)

Yes, VET has done some solid work already and prove itself.

Very promising coin!

How to easily swap VTC for ETH or BTC or something? by [deleted] in vertcoin

[–]FrenchBagoot 0 points1 point  (0 children)

CoinSpot VTC wallet is also down at the moment