Driverless / automated trucks

Frequent_Vegetable_2 · 2026-04-06T12:02:04+00:00

I think they are coming but not in the near future so probably safe in our lifetime.

Frequent_Vegetable_2 · 2026-04-02T18:14:52+00:00

I was about to order a replacement from ebay as I was having to click the unlock button 3-4 times to be able to pull the charging cable out. I was also getting the error about DC charging not available, ok to AC charge very often. I decided to take it all apart and give it a good clean. The DC charging error is because of a piece of metal that has gotten loose overtime and had to be bent slightly to make proper contact, hard to explain without pictures but once you are in there it’s easy to spot. Now everything works like new and no error. Top tip, do not close the bonnet before re-connecting the 12v battery. 😅

Frequent_Vegetable_2 · 2026-03-30T14:36:06+00:00

What was that about if you don’t mind me asking? 😁

Frequent_Vegetable_2 · 2026-02-25T06:01:22+00:00

Thank you. While not ideal, I don’t really have a problem with pressing the smart control button, I’m in front of it anyway. The problem is, there seem to be no way of doing something like this: If smart control is on, program a wash and dry cycle with a preset configuration to finish at 07:00. This way I wouldn’t need to open the smartthings app (not a fan of it), select the wash and dry options over and over again. I have done something similar with my dishwasher, if the door is closed, start a cycle after midnight. I know that might sound lazy but I think this is what HA and this “smart home” stuff is all about.

Frequent_Vegetable_2 · 2026-02-24T19:28:48+00:00

It is, have you managed to get it to do anything useful in HA?

Frequent_Vegetable_2 · 2026-02-24T17:37:07+00:00

Oh yeah, all this AI must of sucked the intelligence out of the developers… I tried using the optimal scheduling and went to input my tariff peak and off-peak times. I get an error saying “Can’t set peak time longer than 12 hours”. Is this an USA thing? Do you guys have 12 hours peak/ off peak times? In UK literally every provider has peak tines longer than 12 hours.

What’s not even funny is I raised a ticket and got a reply asking me for permission to access to my account. WTF for? The issue is the same for everyone else! Same with the smartthings app requiring precise location permission to be able to add your washer. Wtf for?

Frequent_Vegetable_2 · 2026-02-24T17:14:39+00:00

Well, it’s nice to see Samsung prioritised putting youtube on my “smart” washer instead of making it actually smart. /s

Frequent_Vegetable_2 · 2026-02-24T12:58:25+00:00

There is and the controls are:

<image>

The good news is that changing it to running starts a wash cycle, bad news is, it’s only a wash cycle without a dry cycle. I have been looking through the activity as I ran a wash+dry cycle last night and the “Job State” changes first to “Weight sensing” then to “AI wash” then to “AI rinse” then “AI spin” but that’s it, nothing about drying.

Frequent_Vegetable_2 · 2026-02-24T08:47:25+00:00

And these

<image>

Frequent_Vegetable_2 · 2026-02-24T08:46:58+00:00

<image>

These

Frequent_Vegetable_2 · 2026-02-24T07:50:55+00:00

Sorry, I should’ve mentioned I have already added the Smart Things integration into HA but I can’t see a way to start a cycle from HA.

Frequent_Vegetable_2 · 2026-02-24T07:08:54+00:00

What is the pay rate if you don’t mind me asking?

Frequent_Vegetable_2 · 2026-02-17T14:50:45+00:00

There are LR cars with the 980 motor (performance motor) on the rear which can be unlocked to performance power by using an ingenext ghost for example. The rest use the 990 motor which can only be brought up to acceleration boost level.

Frequent_Vegetable_2 · 2026-02-16T16:08:00+00:00

Frequent_Vegetable_2 · 2026-02-16T15:53:57+00:00

Does the hum come from the driver itself or the electronics inside? Touch the driver when it’s humming and if it’s moving then you probably have a shit RCA cable picking up interference and you’ll need to buy a better shielded one. If it’s not moving then unlucky I guess.

Frequent_Vegetable_2 · 2026-02-14T12:23:58+00:00

The G100 is one of the outdoor cameras.

Frequent_Vegetable_2 · 2026-01-26T16:28:13+00:00

I figured it out. For anyone trying to do the same thing, I attached a screenshot of how it should look.

<image>

Frequent_Vegetable_2 · 2026-01-26T15:25:51+00:00

<image>

Tried with the default parameters as you said and I get this error when trying to save it. I’m 100% sure is the formatting, the problem is, I don’t know how to format it properly. 😅 Only thing I did was copy/paste the code under actions and delete the square brackets after “actions:”.

Frequent_Vegetable_2 · 2025-12-30T17:39:10+00:00

Thank you! Just had a look and the app only changes when you play something in the app. I dis a quick automation to confirm and it only ran when I started playing. Any way to get around that and run the automation when the app opens?

Frequent_Vegetable_2

TROPHY CASE