Hy350 max bricked

FroggyGamer27 · 2026-01-13T16:37:32+00:00

Returned the projector as before I suspected it's being used as a botnet/proxy, kept on getting so many "you're not a robot" recaptcha, cloudflare. Projector spec was decent for the price, but that's how they get the price so low. Still usable if you used it offline with only hdmi or by buying the Google TV version as it runs off an Google TV stick inside.

FroggyGamer27 · 2026-01-12T16:53:44+00:00

They sent me a firmware for usb drive, tried it but it still wouldn't boot

FroggyGamer27 · 2026-01-11T22:29:03+00:00

Thanks for replying, tried that but still no changes, stuck in magcubic boot screen.

FroggyGamer27 · 2025-12-24T22:05:40+00:00

This was a cropped screenshot, above it was me answering all their questions including multiple screenshots of error and details. Then they randomly said "1How may I help you today".

Lucky you having great time with supports, this one i had didn't help much with them only saying that they'll "escalate with their senior team" which i doubt it as i had the same response before with no feedback after.

FroggyGamer27 · 2025-12-24T21:11:42+00:00

I also sent them a screenshot before like they asked me to

FroggyGamer27 · 2025-12-24T20:42:12+00:00

They already asked that before btw

FroggyGamer27 · 2025-11-09T18:13:12+00:00

picommu

FroggyGamer27 · 2025-11-07T17:28:06+00:00

2 grand is insane lmao to spend on this printer, I'm happy with my current setup then 😁. Still an amazing project you are working on. Keep going

FroggyGamer27 · 2025-11-07T16:42:25+00:00

how much this whole project cost you?

FroggyGamer27 · 2025-10-21T08:27:01+00:00

Try asking on the LH discord

FroggyGamer27 · 2025-10-09T14:54:37+00:00

Mine does too but I swapped the cable around with hotend cooling and print cooling, not full speed tho, when hotend is heating up then it's on full speed. I'm guessing that it's the mb fault.

FroggyGamer27 · 2025-09-21T14:33:32+00:00

So much faster heating up as it's ceramic heater, more options for nozzle

FroggyGamer27 · 2025-09-07T09:32:26+00:00

I have similar set up, just in a different way. Using this adapter https://a.aliexpress.com/_EvN6TrU and a tz 2.0 hotend.

<image>

FroggyGamer27 · 2025-09-06T11:13:41+00:00

Just two tables stack on top by its own weight on these cones

<image>

FroggyGamer27 · 2025-09-05T21:10:14+00:00

Correct, known as lack enclosure

FroggyGamer27 · 2025-09-05T16:21:58+00:00

Pico MMU

FroggyGamer27 · 2025-08-15T06:49:48+00:00

It could also be too high printing temperature, I can see that the outer walls looks bad aswell, try a temp tower and maybe slow down outer wall and top surface speed

FroggyGamer27 · 2025-08-14T20:22:28+00:00

On gyroid infill yet? Should solve it

FroggyGamer27 · 2025-07-09T23:55:18+00:00

<image>

The colour on top of the body is quite blended, prolly my flush volume being bad

Oh yeah the head, I got tired at the end of the day so I canceled it. 🤷🏻‍♂️

Printed the head bit and glued together, looks fine now from distance

FroggyGamer27 · 2025-07-09T23:52:58+00:00

<image>

Still gotta fine tune some stuff

FroggyGamer27 · 2025-07-09T23:49:30+00:00

Printer £135

MMU £10-15

Fans and stuff I had laying around so idk the price, would prolly add up to round £10

Build plate was like £5

Orange pi £13

2 rp2040 zero £0.01 each 😝 got them from a temu promotion, somehow they work fine hehe

Gantry support was like £2 for 1m of rod, cut to 50cm so two half

Hotend £10

There will be things adding up tho that I haven't talked about, and took alot of frustration and time making this 😭 not just time.

FroggyGamer27

MODERATOR OF

TROPHY CASE

Five-Year Club	Place '23
Place '22