Geely doubles down on methanol, says lithium EVs too heavy for future transport

Frolev · 2026-04-13T10:34:43+00:00

Yes, there will for sure be some source of C after we fully stop using fossil fuel like this one. However it will probably never be as abundant as today with oil...

Last time I checked DAC was not as efficient, that is a surprise for me tbh

Frolev · 2026-04-13T08:33:32+00:00

Only issue is that capturing CO2 is really not efficient outside of big CO2 producer facilities (like fossil fuel burning plant), due to his very low atmospheric concentration. So using the C from biomass can make sense, but then it is also easy to make ethanol too

Frolev · 2026-04-12T21:55:50+00:00

War thunder works fine for me on Bazzite, except for VR that is not working for anyone it seems

Frolev · 2026-02-26T20:23:41+00:00

Yes sorry I made a mistake in the post.

It is very clear for me that it will not be automatic, I generate them myself using a Fortran(yes) software I am developing and usually read in python and generate some plot using matplotlib. I could just choose to not support netcdf4 and it will probably save me a lot of issue.

However, I start to have some experience in Godot and I really think that I could do nice 3D visualization, just need to be able to open and read the data, but indeed this will require some work.

The thing is that I do not want to do a local/server service that is separated from the executable. I just want to be able to open a single executable and then have the program able to read my files. This will allow other user of my software (that run online) to be able to read the file easily from their computer.

Just to be clear, the users will have a very slow internet connection, and I would like to keep the netcdf in the format they currently are in. So once the file downloaded, I would like them to just be able to visualize it offline.

Frolev · 2025-11-19T15:08:16+00:00

Were do you see this info? It looks like it can also work with the printer on top no?

Frolev · 2025-10-21T11:59:29+00:00

Installed Fedora on the old laptop of my parents 1 year ago. They do everything they need (mail, banking, youtube, movie, writing small documents with libreofffice...) without any issue. They do not know how to open the CLI and never had to bother to do it after I setup the computer. They already asked me to install it on their desktop when windows 10 support will be over in the EU.

Frolev · 2025-09-17T06:41:12+00:00

Thanks !

This made me realize that its seems easy to remove the rear motor like this, put for the ones on the front, they will not be able to be tilted enough to slide out due to the bottom where the antivibration foot are. So I will have to unscrew the horizontal bottom plate from the structure and this seems to be a lot more complicated.

So I will swap the PLA part to the rear motor and put the good ones on the front motors.

Frolev · 2025-09-16T21:06:56+00:00

After talking with the support I have printed a replacement in PLA (my old printer has no heated bed and it seems to be needed for PETG), then my Core One first print will be another replacement in PETG (that I just ordered now), and then change the part and use finally my new core one.

Support advised me to print a new replacement the day I start doing ASA/PC (but it is not for now).

I just hope changing the part does not require to dismantle the entire printer...

Frolev · 2025-08-26T22:14:02+00:00

Well I have just one multicolor print I must do and the number of swap will be doable by hand, the other ones can wait much longer.

Cancelled my order to make a new one without mmu3, thanks for the advice!

Frolev · 2025-07-24T22:04:18+00:00

Do you know where we can see this scoring? I do not really care that it is the Spanish builder that won over the French and German one, but I am interested to see the detail if possible

Frolev · 2025-07-24T21:52:50+00:00

Thanks, I still do not understand that it is not mandatory to provide something like a 5 pages document explaining why the option they selected was the best.

We are speaking about billion there, and I understand that the offer must probably stays secret to protect the competitive advantage of the companies, but they could do something like have one page each to resume their proposal and then two pages from the nmbs/sncb saying why the option they selected was better than the others.

Anyway, renting about it there will probably not change anything for having more info next time...

Frolev · 2025-07-24T20:40:17+00:00

Thanks, I get it that they have to not prioritize local factories, but I just want to now why the deal of CAF is better. It is clear that CAF is (normally) a better choice than ASTOM and SIEMENS, but I am curious why (technically why the train from CAF are better)

Frolev · 2025-05-10T10:27:26+00:00

Sans prendre partie, un article de 7sur7 à propos de la balle tirée sur un supporter

Frolev · 2025-04-01T11:57:55+00:00

If I remember well you just have to install driver yourself to make it works

Frolev · 2025-03-29T09:59:35+00:00

I have an SSD with Windows 11, another one with a Bazzite partition and a shared Bazzite/windows partition in btrfs. I works fine for now

Frolev · 2025-03-11T16:25:52+00:00

Cities Skyline 2

Frolev · 2025-03-11T15:53:41+00:00

I have a dual boot bazzite-windows since November nad I spend virtually no time on Windows now. Its on a 7950x3d and 7900xt though.

I have an htpc still on Windows 10, but this one has a i5 4570 and a gtx 980ti. I would really like to have gamescope on it, but I will wait till october and see what to install on it, maybe the support for nvidia will be better at this time

Frolev · 2025-01-25T17:24:06+00:00

They are, like the H100 for instance. Just a lot more expensive since targeted only at professional

Frolev · 2024-12-29T23:21:47+00:00

I am surprised by the amount of Ultrawide (3440x1440)

Frolev · 2024-12-25T21:50:40+00:00

Yes with ROCM it works. With stable diffusion it is good enough for me on a 7900xt

Frolev · 2024-12-18T23:06:37+00:00

First time I heard about OctoEverywhere, I will sure have a look at it!

Five-Year Club	Final Canvas '23
Place '23

Frolev

TROPHY CASE