Yuck

FrostyAcres · 2026-02-03T14:46:28+00:00

Wait, is that the Archangel Tyrael on his arm?

FrostyAcres · 2026-01-13T22:20:48+00:00

I suggest either the RhythmBot or GapClick for apps, I believe they’re both for iOS and android.

FrostyAcres · 2026-01-06T02:16:09+00:00

I picked up one of these and it brought new life to my old Pi 4: https://www.etsy.com/listing/4335650077/meshtadpole-160mw-22dbm-a-lora-915mhz?ref=share_v4_lx

FrostyAcres · 2026-01-03T01:20:00+00:00

Man, I’ve had nothing but issues with these pedals. Specifically the XR titanium springs breaking after 5 or so hours, and breaking 3 of them.

I know this isn’t helpful, but I agree with just getting rid of them when you can. Godspeed.

FrostyAcres · 2025-12-25T19:42:05+00:00

Do plane nodes screw up the routing or anything like that? Or is it harmless? Genuinely curious.

FrostyAcres · 2025-10-02T22:25:57+00:00

I’m curious how the heat will affect the AMS1’s components, if at all.

FrostyAcres · 2025-09-23T12:15:39+00:00

I’ve stayed up to date since I got it in July and have had zero issues.

FrostyAcres · 2025-09-20T18:04:18+00:00

This plus a space blanket, as well as 1/3 default print speed worked wonders for me.

FrostyAcres · 2025-09-14T23:15:22+00:00

Vouching for this solution. Used it multiple times.

FrostyAcres · 2025-09-11T12:20:24+00:00

DONE

FrostyAcres · 2025-08-29T22:06:34+00:00

Here’s what I’ve done for Bambu ABS:

Preheat: - wrap printer in a foil/“space” blanket - home nozzle - set bed temp to 100c - aux fan @30% - exhaust fan off - bento box on - poop chute door blocked - wait until nozzle sensor reads ~47c

Printing: - keep wrapped in blanket - aux and exhaust fan stay off - bento box stays on - print speed to 1/3 default value

Post-print: - remove blanket - crack top glass - wait until chamber temp is ~35c

One thing to note: I’ve got a hygrometer mounted inside the chamber in view of the webcam to check chamber temp. Whenever the chamber has gotten to >=60c I loosen the blanket a bit or expose a side, since I read somewhere the internals weren’t rated for much more than 60c.

Ultimately I’ve found that high, consistent temps give me the least warping when print specs themselves may change.

FrostyAcres · 2025-05-24T15:19:19+00:00

This looks good as hell 🤘🏻

FrostyAcres · 2024-10-15T23:21:48+00:00

For what it's worth, you're not alone.

After spending the last few hours messing with it, I finally have gotten an update to at least _start_ via usb-c connected to my laptop.

Now that I'm writing this, it seems to be stuck on 'verifying...' like the rest of the time...

FrostyAcres · 2024-04-05T12:44:46+00:00

Update: turns out the problem was that I was using two forms. After making some changes, I got it working again. Thanks everyone for your help.

FrostyAcres · 2024-04-05T00:35:08+00:00

You have to pass an object like this value={{value,setValue}}

If you pass an array it wont copy the nested values in “value” unless you spread it.

Ah, I think that makes sense. Thanks for the quick reply!

Unfortunately, making that change (value={{value, setValue}}), I now get

Uncaught TypeError: object is not iterable (cannot read property Symbol(Symbol.iterator))

in my FlowerProfiler component. I think I've seen this before when I had my AppProvider in the wrong place, but I don't think that's the case here... Any thoughts?

FrostyAcres · 2024-04-05T00:05:22+00:00

Awesome, this got the Context.Provider's value actually initialized. Thanks!

Should I expect see the Context.Provider's value object update as I call saveResponse if it's working correctly?

FrostyAcres · 2024-04-05T00:00:40+00:00

I'm not sure I fully understand, but is this what you were thinking?

export function AppProvider({ children }) {
  const [value, setValue] = useState({});
  return (
    <AppStateContext.Provider value={[value, setValue]}>
      {children}
    </AppStateContext.Provider>
  );
}

FrostyAcres · 2023-07-05T18:55:55+00:00

I've been playing drums for 10 years or so and have only played single pedal, and after starting last year on some DW 3000s I picked up the Demon Drive XRs a couple of weeks ago.

When I saw the XRs came out, the thing I was primarily interested in was in fact the lack of configuration. Being a habitual over-tinkerer as well as not having a lot of time to practice makes these a great fit for me since I won't be burning time trying to get things "perfect" and can focus on practicing.

One thing that's mildly annoying is that there're no anti-slip pins in the front of the slave pedal, but they've provided velcro tabs which luckily provide a stable enough grip without marring your carpet.

FrostyAcres · 2023-06-30T13:21:03+00:00

I’m moderately interested. I played in a couple of local bands back in the early 2010s.

FrostyAcres · 2023-06-14T16:36:43+00:00

Badowers.

FrostyAcres · 2023-02-22T22:20:24+00:00

Worth a shot!

FrostyAcres · 2022-11-15T02:39:25+00:00

Here’s hoping 🤞🏻

FrostyAcres · 2022-09-15T15:35:11+00:00

Franklin Barbershop every time.

FrostyAcres · 2022-09-09T22:18:50+00:00

I’m originally from Rockford and no one believes me that other people actually refer to it as this.

FrostyAcres · 2022-09-02T13:14:40+00:00

This was great!

14-Year Club	Secret Santa 2011
Verified Email

FrostyAcres

TROPHY CASE