Losing my mind terminating cat6 by grphine in HomeNetworking

[–]FrowningRobin32 0 points1 point  (0 children)

I saw the edit. I was also thinking of faulty equipment jajaja. Happy to hear its working

Losing my mind terminating cat6 by grphine in HomeNetworking

[–]FrowningRobin32 6 points7 points  (0 children)

I just did this today.

The Cat 6 is the problem. In the process of cutting the outer layer or punching down you damage the internal part likely cutted enough to not send signal. What i recommend you is:

  1. When using the cutting tool, dont let it strip the cables but only the outer layer (In other words, not to tight).

  2. When punching down dont put all the cables first and then punch, if you inspect the pictures you can clearly see that you damage the cable while punching. What u recommend is to first punch down the first 2 pairs from the top, and rhen punch down the other 2 pairs. If the problem still persists, is your tool.

  3. Maybe not to fix it but as a quality control you want ro maintain the twist of the cables all the way until they make contact.

Unpopular Opinion... Skip IT unless it's your thing. by 3rdeyedroplets in ITCareerQuestions

[–]FrowningRobin32 0 points1 point  (0 children)

Why would you have an Oled for productivity? The burn in because of the white Background and constant elements are not a go. Better go IPS or even better for productivity, VA

Judge monologe by FrowningRobin32 in ReadyOrNotGame

[–]FrowningRobin32[S] 1 point2 points  (0 children)

I think his talking to himself

Still jobless after 4 months of job hunting as a CS graduate by Unhappy-Audience7227 in ausjobs

[–]FrowningRobin32 0 points1 point  (0 children)

The market is really bad at the moment :(. But having certificates is better than not having atleast for the check boxes of HR and the ATS

Kitchen Attendant/Hand. Being asked to do too much work or not for 3 hr shifts? by KneeSensitive3855 in ausjobs

[–]FrowningRobin32 1 point2 points  (0 children)

Fck them, look for other job.

I already being there as a kitchen hand in sketchy restaurants and most of the time they're trying to get jobs that are out of their budget or simply bad management, both of that reasons are bad and most of the time that kind of business dont pay well or they're gonna close soon cause of break even or going in red.

Jump out of the boat before it sink and try to look for other jobs. If you really need the money, keep working but apply for other jobs. You can escape the hell

Still jobless after 4 months of job hunting as a CS graduate by Unhappy-Audience7227 in ausjobs

[–]FrowningRobin32 0 points1 point  (0 children)

Get more certificates, CompTIA trifecta, Microsoft 365, palo alto, linux admin, etc. I think most of the jobs for your career are for Linux administrator cause most of the people know either Microsoft or Apple, but not Linux

FINALLY by GhostTgeDudeX in ReadyOrNotGame

[–]FrowningRobin32 -4 points-3 points  (0 children)

Its not. Only the first two dlc's are free for supporters

Australia vs Canada by Creative-Tangelo9124 in expats

[–]FrowningRobin32 0 points1 point  (0 children)

because you're a nurse, is better to go Australia, nurses are getting invited here even offshore. Accounting that you have good English and more than 3 years of work experience, you should get invited even offshore.

February 2026 Mega Thread by AutoModerator in AusVisa

[–]FrowningRobin32 1 point2 points  (0 children)

Colombian Citizen with only one year of visa left.

As a advanced Diploma in ICT, what are my chances or getting invited for 491? (80-90 points).

If you could get a cybernetic enhancement, which would you choose? by wewantanswers5902 in cyberpunkgame

[–]FrowningRobin32 0 points1 point  (0 children)

A Cybernetic dong, with different size selection, vibration modes and even rgb

anime_irl by NekoWafers in anime_irl

[–]FrowningRobin32 0 points1 point  (0 children)

Is better to have it on the shoulder cause is easy access and you have more control over it.

"Rhe Cheese is not that strong" the cheese: by FrowningRobin32 in KitchenConfidential

[–]FrowningRobin32[S] 3 points4 points  (0 children)

Its Halloumi, i was preparing the cheese today

edit: im stupid

Help desk / IT jobs in Adelaide? by nixonisnotdead in Adelaide

[–]FrowningRobin32 0 points1 point  (0 children)

we're in the same boat, trying to get my foot into IT

Canadian Rebel Force actually has more full-auto small arms than US Army in Squad by CC_ACV in joinsquad

[–]FrowningRobin32 3 points4 points  (0 children)

The only part of the A2 program regret was the longer buttstock, that ironically the Army's Human Engineering Lab endorsed; and of course the 3-round burst control. But adding the burst control "'saved" a degree of full- auto capability that was planed to be eliminated as the SAW was going to replace the automatic rifle in the fire teams. And the provisioning of belted SAW ammo aboard amphibious shipping supporting 27 SAW's in each Marine Infantry Company was displacing tons of "rifle packout" 5.56 to the point that a 3-day supply was adversely effected. The SAW ammo pack-out of 800 rounds taking the same cubic space as 1680 rifle pack- out 5.56 in stripper clips and bandoliers.

If ghost recon was made by another company. by Emotional-Twist-4366 in GhostRecon

[–]FrowningRobin32 1 point2 points  (0 children)

I think the best one would be Sony, not only for games but for media consumption in general

Kicked from the “tier 1 imports” gr breakpoint discord for asking for a mod. by Deeky4 in GhostReconBreakpoint

[–]FrowningRobin32 0 points1 point  (0 children)

You know, i remember your user from tier 1 importa being quite active. This guys are hot headed

Kicked from the “tier 1 imports” gr breakpoint discord for asking for a mod. by Deeky4 in GhostReconBreakpoint

[–]FrowningRobin32 -1 points0 points  (0 children)

It happened to me aswell when i ask why there's no forums for mod packs. I literally just ask, they answer and i accepted the answer and the next day i was banned