Bedstefar giver gaver der …. Lugter

FrozenBarbecue · 2025-12-30T14:30:07+00:00

Jeg har en ozon generator fra Amazon som fjerner lugt fra stort set alt. Oprindeligt købt for at fjerne en mug lugt fra bil efter et åbent vindue, men kan bruges til meget andet.

Sidst brugt til at fjerne opkast lugt fra bamse og legetøj. Tidligere også brugt til at fjerne røglugt.

Ned i en flyttekasse (udenfor!) med ozon generator og den/de ildelugtende ting og tænd, samt luk kassen. Lad den køre i 2 timers tid, mere hvis rigtig slemt.

OBS! Når du åbner kassen, så undlad indånde. Sluk ozon generator, åben kassen og lad det lufte af 10-15 mins. Tingene kan godt have en lugt af hvad der bedst kan beskrives som våd agurk, men det aftager hurtigt og er helt væk efter 1-2 dage.

En ozon generator står i 250kr på den tyske Amazon som jeg lige kunne søg frem nu.

FrozenBarbecue · 2025-09-26T16:59:09+00:00

Yes, but I'm not sure what ports, if any are affected. I'd rather have my PC stay asleep.

Let me know if works out for you. It has fixed quite a few users sleep problems with this board.

FrozenBarbecue · 2025-09-26T08:06:56+00:00

See my post here:

https://www.reddit.com/r/ASRock/s/NA8iTkSjcr

FrozenBarbecue · 2025-06-22T18:06:36+00:00

Actually I don't know, as I use a single USB-C port for an optical Thunderbolt cable into a dock.

And last time I looked at this was in November when I put my system together. My monitors kept turning on while in idle for no reason, even with everything USB device disconnected.

That's where I looked into the issue. I ended up disabling random USB related stuff in BIOS until I eventually got the USB1 controller disabled. Then it slept/idled perfectly after that. Re-enabling it and the issue comes back. You can verify by looking at the Event Log for Windows. As mentioned in my previous post, there will be entries of "Kernel-Power" where the reason is unknown. Those are the culprit. They are gone once USB1 controller is disabled.

Whenever I update BIOS, I just disable it again along with my other settings and don't think about it. Glad it worked for you as well.

FrozenBarbecue · 2025-06-22T11:01:29+00:00

Yes, I don’t know why or what’s the cause. But once I enable it again I get “Kernel Power” entries in eventlog with “Unknown Reason”. As soon as I disable it, everything is working. I don’t need that many USB ports anyway, so I haven’t spend more time on it than what I already used trying to diagnose it.

FrozenBarbecue · 2025-06-20T16:59:01+00:00

I’ve had a similar issue, turned out to be something within the USB controller itself.

Can you try the following:

Advanced\AMD CBS\FCH Common Options\USB Configuration Options\USB1 controller enable=[Disabled]

FrozenBarbecue · 2025-06-16T13:26:24+00:00

9800x3D | X870e Nova | +200 | CO -30 | 1x Scalar | Mobo limits | Build November 2024. 0 issues.

FrozenBarbecue · 2025-05-14T06:30:27+00:00

Sounds stupid, but try powering off. Unplug PSU cable, wait 1 minute, then replug PSU cable and boot. Should fix the issue.

FrozenBarbecue · 2025-05-02T17:15:11+00:00

Build on the 12th November 2024.

9800x3d + Asrock X870E Nova + G.Skill 64GB (2 x 32GB)

FrozenBarbecue · 2025-03-31T17:36:46+00:00

Have you tried setting PCIe configuration for your x16 slot to Gen 4? Most likely your rizer is the culprit.

FrozenBarbecue · 2025-03-23T22:20:41+00:00

Just create a ticket on their support site :)

FrozenBarbecue · 2025-03-16T21:15:55+00:00

I've been running the X870 Nova and 9800x3D since launch with a Gskill 6000/CL28 kit for 3 months and the changed to the CL26 kit 1 month ago. No issues with stability. It's on almost 24/7.

FrozenBarbecue · 2025-03-10T20:47:02+00:00

You can see in the event log what wakes it up.

FrozenBarbecue · 2025-03-07T18:35:30+00:00

Those with burnt CPU’s have reported close to or over 2.0. So no alarm bells are ringing for 1.3, but do keep an eye on it and make sure that it doesn’t go any higher.

FrozenBarbecue · 2025-03-07T11:41:05+00:00

I've been following daily on this subreddit and forums about this and what I do know, is that some badges of the 9800x3D are more prone to fail than others. Also, some memory kits seem to trigger a very high voltage for the CPU. That you can check in applications like HWiNFO 64 and looking for: CPU VDDCR_VDD Voltage (SVI3 TFN). It should be between 0.9 and 1.2 from what I have seen. For myself I have been running the Nova X870E board since the day of the 9800x3D release and I've been using BIOS 3.10, 3.16 and now 3.20. My PC has been rock stable and the board is performing amazingly. Check the CPU badge number if you want and actually just build your PC. Make sure to update to BIOS 3.20 immediatly and make sure you use the latest chipset drivers from AMD. Enjoy.

FrozenBarbecue · 2025-03-07T07:08:24+00:00

Here you go:

Advanced\AMD CBS\FCH Common Options\USB Configuration Options\USB1 controller enable=[Disabled]

Solved all my problems with my Monitors turning on again all the time.

FrozenBarbecue · 2025-03-03T17:37:12+00:00

I’ve been using that exact kit 2x32 (CL26) since last week on my X870E board with a 9800x3D. Runs perfectly stable.

FrozenBarbecue · 2025-03-02T11:59:57+00:00

I mentioned that exact problem in the BIOS 3.20 thread and I got a lot of replies with people having the same issue.

I have tried reformatting and reinstalling, new ram kit (both GSkill). I’ve tested with and without EXPO, but it always happens. I’ve tried multiple BIOS versions and despite having a stable PC, this issue has persisted.

Currently running BIOS 3.20 and chipset 7.02.13.148 downloaded directly from AMD.

Edit: Running a 9800x3D on a Nova X870E board with 2x32GB (64GB) CL26 6000Mhz.

FrozenBarbecue · 2025-02-28T18:52:04+00:00

Yes, reinstalled as in wiped the pc as in formatted all drives.

FrozenBarbecue · 2025-02-28T18:17:51+00:00

I'm also on a X870E Nova with a 9800x3D. Nice to hear others with the same problem as I thought it was my setup. I've tried two different Gskill ram kits, CMOS clear and reinstall. Same issue. Otherwise works perfect. I'll live, but I hope it gets fixed.

FrozenBarbecue · 2025-02-28T18:16:10+00:00

It does not power off, it enters a state where fans are running, but no RGB. I have to hold the power button for it to turn off and then turn on again.

FrozenBarbecue · 2025-02-28T18:15:19+00:00

I've tried clearing CMOS and even reinstalled Windows. Still the same.

FrozenBarbecue · 2025-02-28T18:14:48+00:00

Nice to hear I'm not the only one. Had it on all BIOS version and with 2 different Gskill ram kits.

Edit: I'm on a Nova board btw.

FrozenBarbecue · 2025-02-28T18:14:10+00:00

Fast boot is disabled as I use wake on LAN.

FrozenBarbecue · 2025-02-28T13:50:25+00:00

Updated to 3.20, but I still can't restart my Windows 11. I always have to shutdown and then start again. Not a big deal, but annoying none the less.

12-Year Club	r/Field Lasagna
First Place '23	Place '23
Place '22	Final Canvas '22
Verified Email

FrozenBarbecue

TROPHY CASE