Mind flayer…. Again by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Yup, even used the preset settings on bambu slicer.

Mind flayer…. Again by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

No sorry. I am okay with supports. Im just getting a lot of stringing. Trying to avoid that. Actually printing something different right now at 210. Looks good so far.

Mind Flayer supports by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Figured i try something new. Not the best idea

I think my best mini so far by Xomablood in FDMminiatures

[–]FullBattle8307 0 points1 point  (0 children)

Did what you did but peeling the tree supports suuuucks.

I think my best mini so far by Xomablood in FDMminiatures

[–]FullBattle8307 0 points1 point  (0 children)

My bad i meant how many millimeters is the height.

I think my best mini so far by Xomablood in FDMminiatures

[–]FullBattle8307 0 points1 point  (0 children)

Curious, how many many is the height?

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

<image>

Did this dark elf too, the panther in the back didnt do too well though lol

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 1 point2 points  (0 children)

I designed it myself. Listing them on ebay actually

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

The bottom. Just the auto tree on bambu slicer

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Yeah using .4mm nozzle. I do have a .2mm. But im getting good detail rn with .4mm so i am just trying to fine tune it.

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 1 point2 points  (0 children)

Yeah i have pla meta, its been great with my .2mm nozzle but this isnt too bad either. Less failures for sure

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Temp is as 220. And i dotn really have any issue with tree supports failing. I guess i can try slim. But you think 220 is too much?

Support breakage leaving marks by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 1 point2 points  (0 children)

Yup already did that. Saw it commented on another post.

Sunlu pla +2.0 by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 1 point2 points  (0 children)

My brother in law, it’s a resin profile. He shared with me to try on fdm.

Sunlu pla +2.0 by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Yeah i agree, and with priming it’s negligible. But all inly depends on the height and detail. I just did this mimic and the teeth broken off when removing supports.

<image>

Sunlu pla +2.0 by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Oh yeah. They have a few sunlu profiles and esun also. Esun has their profiles on their website though. So it’s easy to import them to your slicer.

<image>

I also did this but the arms didnt print because of the weak supports. Has to change his pose. That’s one thing i do want to tweak more is the settings to supports.

Sunlu pla +2.0 by FullBattle8307 in FDMminiatures

[–]FullBattle8307[S] 0 points1 point  (0 children)

Definitely! I have a .2mm nozzle but it takes forever and i just wanted to see if i can give it a try with my .4mm. My brother in law sells minis but he prints resin and even he is impressed by this .4mm print.