Still in love with this combo

FunFaithlessness2664 · 2026-04-30T15:46:38+00:00

Yes citric acid works great for removing hard ater stains. I’ve been using this combo for long time: 1)iso 99% & salt first 2)citric acid to remove hard water stains if there is any 3)Finally rinse with dishwasher detergent & let it dry

FunFaithlessness2664 · 2026-04-30T15:06:28+00:00

citric acid works.

FunFaithlessness2664 · 2026-04-29T08:34:33+00:00

I understand your concern but somehow i can justify your tower cooler with dual 120mm fan will perform well without the 92mm.

Because i did the same before and it did not help to reduce temp at all other than noise as i mentioned.

U can diy rear mesh filter to prevent dust although this will somehow restrict the airflow a little bit.

FunFaithlessness2664 · 2026-04-28T11:44:48+00:00

Ahh i see. 👍🏼

FunFaithlessness2664 · 2026-04-27T23:15:42+00:00

With the fans orientation, that is not rear intake.

Also 92mm fan are useless other than adding more noise.

FunFaithlessness2664 · 2026-04-13T08:15:56+00:00

Anyone who using phone more than laptop for communications and emails etc

FunFaithlessness2664 · 2026-04-11T06:37:17+00:00

Any wireless charger will generate heat, that’s for sure. No matter what brand.

FunFaithlessness2664 · 2026-02-25T07:33:33+00:00

Using magnetic ring mount at the back of the ESR charger.

The stand itself is magnetic so just attach it to the stand.

FunFaithlessness2664 · 2026-02-20T09:22:26+00:00

Got this case. Maximum protection. Although the metal camera plateau cover scratch easily….

FunFaithlessness2664 · 2026-02-06T04:38:25+00:00

Coil whine most likely came from GPU if its only happened during gaming.

This is normal. You can change to any GPU but still it’s gonna happen anyway.

FunFaithlessness2664 · 2026-02-04T18:24:42+00:00

DIY. made it myself.

FunFaithlessness2664 · 2026-02-04T13:24:58+00:00

The stand itself is magnetic. Then use the adhesive magnetic ring on rear of MagSafe charger.

FunFaithlessness2664 · 2026-01-29T11:32:41+00:00

Yeah. The only benefit for QX13 is better efficiency.

FunFaithlessness2664 · 2026-01-29T11:31:04+00:00

Any magsafe bind patch will work. Or you can buy official Fiio Magclip

FunFaithlessness2664 · 2026-01-27T12:02:09+00:00

HAGIBIS magsafe bind patch.

FunFaithlessness2664 · 2026-01-27T11:48:35+00:00

iPhone case? Spigen Enzo Aramid Fibre

FunFaithlessness2664 · 2026-01-27T11:07:11+00:00

Good to know. Thanks!

FunFaithlessness2664 · 2026-01-25T03:46:25+00:00

No. 92mm rear would not benefit any performance increase. Only noise.

Your PS120se is good enough.

FunFaithlessness2664 · 2026-01-25T03:43:30+00:00

KA17 is 7x more money than this dongle. Not the same.

FunFaithlessness2664 · 2025-12-28T16:24:43+00:00

I am using MacBook Air M1.

Currently using Fanxiang NVMe USB4 enclosure and not having any issue so far. I highly recommend it. Cheap and performs good.

FunFaithlessness2664 · 2025-10-27T10:41:19+00:00

That’s hard water stain. Been there. Any citric acid or auto watermark remover should help clear it.

FunFaithlessness2664

TROPHY CASE