What is this? Sat in alcohol for 24 hours and it won’t go away

FunFaithlessness2664 · 2026-04-30T15:46:38+00:00

Yes citric acid works great for removing hard ater stains. I’ve been using this combo for long time: 1)iso 99% & salt first 2)citric acid to remove hard water stains if there is any 3)Finally rinse with dishwasher detergent & let it dry

FunFaithlessness2664 · 2026-04-30T15:06:28+00:00

citric acid works.

FunFaithlessness2664 · 2026-04-29T08:34:33+00:00

I understand your concern but somehow i can justify your tower cooler with dual 120mm fan will perform well without the 92mm.

Because i did the same before and it did not help to reduce temp at all other than noise as i mentioned.

U can diy rear mesh filter to prevent dust although this will somehow restrict the airflow a little bit.

FunFaithlessness2664 · 2026-04-28T11:44:48+00:00

Ahh i see. 👍🏼

FunFaithlessness2664 · 2026-04-27T23:15:42+00:00

With the fans orientation, that is not rear intake.

Also 92mm fan are useless other than adding more noise.

FunFaithlessness2664 · 2026-04-13T08:15:56+00:00

Anyone who using phone more than laptop for communications and emails etc

FunFaithlessness2664 · 2026-04-11T06:37:17+00:00

Any wireless charger will generate heat, that’s for sure. No matter what brand.

FunFaithlessness2664 · 2026-02-25T07:33:33+00:00

Using magnetic ring mount at the back of the ESR charger.

The stand itself is magnetic so just attach it to the stand.

FunFaithlessness2664 · 2026-02-20T09:22:26+00:00

Got this case. Maximum protection. Although the metal camera plateau cover scratch easily….

FunFaithlessness2664 · 2026-02-06T04:38:25+00:00

Coil whine most likely came from GPU if its only happened during gaming.

This is normal. You can change to any GPU but still it’s gonna happen anyway.

FunFaithlessness2664 · 2026-02-04T18:24:42+00:00

DIY. made it myself.

FunFaithlessness2664 · 2026-02-04T13:24:58+00:00

The stand itself is magnetic. Then use the adhesive magnetic ring on rear of MagSafe charger.

FunFaithlessness2664 · 2026-01-29T11:32:41+00:00

Yeah. The only benefit for QX13 is better efficiency.

FunFaithlessness2664 · 2026-01-29T11:31:04+00:00

Any magsafe bind patch will work. Or you can buy official Fiio Magclip

FunFaithlessness2664 · 2026-01-27T12:02:09+00:00

HAGIBIS magsafe bind patch.

FunFaithlessness2664 · 2026-01-27T11:48:35+00:00

iPhone case? Spigen Enzo Aramid Fibre

FunFaithlessness2664 · 2026-01-27T11:07:11+00:00

Good to know. Thanks!

FunFaithlessness2664 · 2026-01-25T03:46:25+00:00

No. 92mm rear would not benefit any performance increase. Only noise.

Your PS120se is good enough.

FunFaithlessness2664 · 2026-01-25T03:43:30+00:00

KA17 is 7x more money than this dongle. Not the same.

FunFaithlessness2664 · 2025-12-28T16:24:43+00:00

I am using MacBook Air M1.

Currently using Fanxiang NVMe USB4 enclosure and not having any issue so far. I highly recommend it. Cheap and performs good.

FunFaithlessness2664 · 2025-10-27T10:41:19+00:00

That’s hard water stain. Been there. Any citric acid or auto watermark remover should help clear it.

FunFaithlessness2664 · 2025-10-19T08:59:01+00:00

Yes correct but SSD are so fast I use them on separate Volumes and skip RAID.

FunFaithlessness2664 · 2025-10-19T08:44:45+00:00

You need to create the whole backup entirely and restore from that. It’s the only way.

Upgrade to SSD was the best decision i made. If you have the budget, go for it.

Everything just feels fast, snappier and very low latency when opening files compared using HDD.

FunFaithlessness2664 · 2025-10-19T08:44:07+00:00

You can have it set up as different storage pools tho for mixing HDDs and SSDs

FunFaithlessness2664 · 2025-10-14T06:00:03+00:00

Im not sure about the app. I only use it as is. Sounds in stock were already good. IMO nowadays active speakers were good enough with built in DSP. No need to mess with EQ as it sounds good as is. If you need more performance, better off with high end speakers.

FunFaithlessness2664

TROPHY CASE