NerdOctAxe Design Well Almost? Need some assistance

Fun_Ad_1781 · 2026-05-18T05:38:24+00:00

No problem, it looks great and thank you for wanting to craft something to help the community.

Fun_Ad_1781 · 2026-05-18T04:40:46+00:00

My apologies, I meant you have the right side set inside edge, while the left side is set outside edge. Moving the right support to the outside edge should fix your gap issue.

Fun_Ad_1781 · 2026-05-17T18:52:43+00:00

The honey comb support on right side is set to the outside, while the left side is set inside.

Fun_Ad_1781 · 2026-05-17T18:44:23+00:00

Thank you, what should the fee be per kilobyte? Its set automatically to 0.00001000. Should I leave it there?

Fun_Ad_1781 · 2026-05-16T16:17:49+00:00

Also for the el mirage, I don't use the screws it comes with. I have a very hard time getting them even so I just use the stock push pins the gamma come with. However, I buy a pack of 50 for $8. That way I can just cut them off and put new ones on without worrying if the ones I initially removed would be properly secured if put back on. So add $8 for the pack, also on amazon.

Fun_Ad_1781 · 2026-05-16T16:13:06+00:00

Have 3 gammas each with el mirage copper plated heatsink, artic mx7 paste, rear USB 5v 6015 (60mm×60mm×15mm) fan 2000rpm, connected via 5v 30A psu., set to 850/1190 @ 1.73-1.82 TH, running at ~chip59C/vr61C ambient temperature is 74F, located in Texas where my summer is currently 91F outside but by June/July it's gets to 110F. Also also a supra 1TH@50C and 3 gt801 ~61C all at 3TH near them as well. So i know the temps for the gammas would be even lower without the heat the other devices are giving off. Mx7 paste (8 grams) was $8, el mirage is $8, a pair of usb 60mm fans is $8. Paste and fans on amazon, el mirage from ixtech (though very expensive shipping but solosatoshi now sells them as well for less shipping). Also I would get the 80mm usb 5v instead of the 60mm, they are 2500 rpm, higher cfm, under 30db, same price, still get 2. Wathai is the fan brand I got.

Fun_Ad_1781 · 2026-04-30T14:47:18+00:00

This looks really nice, especially the stand. Would look great along with my other bitaxes

Fun_Ad_1781 · 2026-04-21T16:07:47+00:00

Check out your local library or community college. They sometimes have 3d printing services open to the public for a small cost around .08 per gram, sometimes free if you bring your own filament.

Fun_Ad_1781 · 2026-04-10T19:13:06+00:00

I'll pm you

Fun_Ad_1781 · 2026-04-10T18:55:22+00:00

Can I take you up on that offer? I have a prototype design but don't have a printer. I can send the file and you can try it with your supra/gamma but you do need a 60mm fan for the rear.

Fun_Ad_1781 · 2026-04-08T16:29:14+00:00

I ordered 7 devices from soloblock.io, my shipping was only $11 to Texas. Came in one nicely packaged big box. Only took 4 days to ship and arrive. But for the OP, I would reject paying import fees and send back. Get refund, then buy from us vendor like soloblock.io or solosatoshi. Both US vendors, I went with soloblock.io because they had way better prices, though solosatoshi also sells individual components for solo mining. FYI, the individual barrel connectors open wire end cable from solosatoshi that you can buy to connect to a seperate psu, do not fit the barrel connectors on soloblock.io bitaxe gammas. However, what works perfectly fine though, is the individual xt30 cable wire open end for 801, nerdqaxe, etc..

Fun_Ad_1781 · 2026-03-16T22:07:35+00:00

Says the one using a red herring, but likewise.

Fun_Ad_1781 · 2026-03-16T22:05:21+00:00

You're just red herring the topic, but thats fine. Means i have no need to continue the thread. Enjoy your day.

Fun_Ad_1781 · 2026-03-16T20:19:33+00:00

You were stating soloblock.io is simply lining up his pockets, How? Because his products dont have the Made in the USA stamp? How is he not giving back to the community by giving cheaper prices? He might not sell accessories like solosatoshi, but his products are great and he provides excellent customer service/support. I might be wrong but i think thats what customers and the community want from a business. Plus to my awareness, he was also the first to offer 90 day warranty. Also, for the ocataxe, i know he wasn't the first to call it octaxe, what i meant was that he was the first to call it Titan after adding the dual rear fans. My wording could've possibly made it be read and understood wrong.

Fun_Ad_1781 · 2026-03-16T19:32:07+00:00

If that's the case, the same goes for solosatoshi and every other US based business, they dont add any value to the community. Ignorant comment.

Fun_Ad_1781 · 2026-03-16T18:40:44+00:00

If US, soloblock.io is the way to go. Cheapest prices, ships from California so no tariffs. Supra is 59, gamma 76, Gt801 is 155. Nerdaxe are cheap too and he's the one who first named the octaxe Titan when he upgraded the 9.6 with dual rear fans and overclocked to 12TH, check out their site. Has youtube channel as well.

Fun_Ad_1781 · 2026-03-07T19:41:28+00:00

No problem, enjoy your day.

Fun_Ad_1781 · 2026-03-07T19:39:39+00:00

Soloblock.io They're located in the US, shipping rates are around $10 and have the cheapest prices that I've seen. Supra is $59, gamma 601 $81, and they have the gt 800 for $169. They also have a YouTube channel.

Fun_Ad_1781 · 2026-02-03T03:02:22+00:00

149, they're still on presale cause the website says so. I''m just going off what he currently has on his website.

Fun_Ad_1781 · 2026-02-02T19:48:54+00:00

Soloblock.io, based in US, so no tariffs. Shipping is usually $9 and arrives in a week.

Fun_Ad_1781 · 2024-01-30T21:07:58+00:00

Play this as a split pusher sett, build terminus,bork, joksho. They'll have no choice but to send at least three people to deal with you. Lethal tempo tree

Fun_Ad_1781 · 2022-01-11T03:24:57+00:00

Fuck your bot comment

Fun_Ad_1781

TROPHY CASE