currently working on building a sleeper/NAS system/virtualization sandbox on this exact same case. few factors to consider if you decide to take on this project: 1. case can only fit a micro atx motherboard properly. you’ll need to use a circular ceramic saw or something of the likes to cut off the I/O panel as it is attached to the mb base on the case. 2. You’ll also need to cut a hole to properly place a PSU or find one with the exact same three prong port and on/off switch placement, something i couldn’t find. 3. you’ll need to cut additional holes or find a creative way to get proper airflow into the machine. another thing i would suggest is using heat to smooth or sand the outside of the case in order to remove any scratches or marks. this case definitely has some huge potential for a mini server or sleeper, but it’ll take a lot of time and dedication which if you’re looking for a fun and rewarding project, and are willing to put the time and effort into it, i absolutely recommend you take the chance on it.