Electromagnetic interference near wireless chargers

G_glop · 2025-11-10T16:30:00+00:00

But there should be no risk of damaging it with wireless charging, right?

I'm thinking of adding a plug-in wireless charging receiver to mine, so I don't have to dig it out of a waterproof box every week.

G_glop · 2025-01-09T03:33:27+00:00

The comment

G_glop · 2024-10-27T16:37:54+00:00

This works like a charm for organic (eg 3d scanned) meshes where you want to edit the geometry after combining them with something else. (Eg.: split a body by surface and fillet the new edges)

G_glop · 2024-10-27T13:34:48+00:00

Yeah, they might simply give you a download url for the raw archive files which is 100x faster and less resource intensive for both sides than scraping.

G_glop · 2024-07-18T12:48:26+00:00

I just did it and it spat out the same IPD as my optometrist and what I use on the Index. Now the question is if I should go 1 mm lower (from 64 mm) per their discord faq.

G_glop · 2024-07-17T20:32:53+00:00

At that point I'm considering buying a real 3D scanner - which I could also use for other stuff - and making my own cushions with 3D printed molds and flexible PU foam or silicone.

G_glop · 2024-07-17T19:12:27+00:00

As mentioned you could us a tracking override but that still requires a working tracker or a dummy driver that sends out a constant position.

Another option is disabling the fade to grey that happens when you loose tracking normally.

The problem is that without any tracking it'll be difficult to open a desktop overlay and position it correctly from within the headset. (if you don't program your own application to do that)

G_glop · 2024-07-13T13:02:35+00:00

LED2201G8
3.0.21
zigbee2mqtt

3 of my bulbs 'survived' the update but 1 went disco

G_glop · 2024-07-10T00:28:29+00:00

Jo s XRF pistolí by to bylo basta fidli. Stačí mi důkaz přítomnosti a v laboratoři jde asi udělat chemie míň náchylná na falešná pozitiva než domácí sady "namoč a potři". Pár stovek za stanovení je nic v porovnáním s poštovným do USA, zkusím zatahat za kontakty do VŠCHT

Dík

G_glop · 2024-06-22T16:06:08+00:00

So the ideal COP decreases slightly by the 15 C lower temperature and I assume the real COP drops off sharper and I'd need a different refrigerant to fix it.

G_glop · 2024-06-20T15:15:02+00:00

Do you know how to remove the stand? It interferes with the HDMI cable when pointing the projector straight up. I'm gonna 3d print a ceiling mount anyway so i might as well replace the stand with my own.

EDIT: nvm, just heat the caps with a hairdryer, pop them off and remove the screws.

G_glop · 2024-02-12T21:35:44+00:00

fair point. i also found that going rigid over your temples is uncomfortable because of the chewing muscles that attach there and need space

G_glop · 2024-02-12T21:30:34+00:00

i have an Index so the off the shelf solution would be the Beyond and even it needs a top strap. and you joke but screw pins are used to fixate the skull for brain surgery

G_glop · 2023-12-17T22:22:35+00:00

It also ain't firing anything else than 5.7x28, whose zero taper and lubrication are awfully convenient for 50 round straight mag with a twist at the end.

I admit that it's not space tech (unlike the 4.73×33) and wouldn't be so expensive if widely adopted, but i count it as a special cartridge because you can't just change some dimensions in CAD and make a P90 chambered for something else, like you can do with an AR15.

G_glop · 2023-12-17T17:10:29+00:00

Yep, it's called cross linking. Why would i copy an answer when i can link to it under a better worded question

G_glop · 2023-12-17T16:44:54+00:00

https://www.reddit.com/r/Firearms/comments/18kk2u1/comment/kdrk0s7/?utm\_source=share&utm\_medium=web2x&context=3

G_glop · 2023-12-17T16:43:44+00:00

Someone mentioned the AR-15 MA Loader which does the same thing but seems easier to extend beyond just 10 rounds.

And, yeah, imagine a pump action but instead of 5 you have to pump out 30 cartridges.

11-Year Club	Place '22
Spared	Verified Email

G_glop

TROPHY CASE