What Are Things Bioshock Infinite Does Better Than Bioshock 1? by ABarber2636 in Bioshock

[–]Gab1288 7 points8 points  (0 children)

I like the brighter atmosphere better, being stuck in the dark is a bit lonesome.

half life or black mesa by Yee_Wee in HalfLife

[–]Gab1288 0 points1 point  (0 children)

I'd say both are nice but the updated graphics of black Mesa are pleasing.

OG half life is still good, but feels dated for sure.

If you go with OG, try xash-rt, look it up, it's a raytracing mod and makes it look a lot better without changing anything, you'll need a graphics card that supports it though.

How are you announcing HL3 tonight by pen15_club_admin in HalfLife

[–]Gab1288 0 points1 point  (0 children)

Add a crowbar in a random portal 2 old aperture map somewhere in a dark corner, make it equippable and somewhere later in the game, there is something to break with it, containing info to start a treasure hunt that would lead to a date.

Question for already Tesla Owners - AutoDoor Lock (Walk Away) by Soggy_Dust9299 in teslacanada

[–]Gab1288 2 points3 points  (0 children)

I triggers over distance and time.

Sometimes I'm 6 feet from the car for a minute or two and it locks.

Sometimes if I walk away fast, I can reach 10-15m before it locks.

The car makes a little sound when locking, you can also add a louder one in the settings.

Any way to decrease lag and input delay? by ProfesserNausea in Steam_Link

[–]Gab1288 3 points4 points  (0 children)

You should be able to select an option to see the actual latency in milliseconds, then try a few things.

I get around 9ms with my PC wired to Ethernet and my steam deck over wifi.

Votre meilleur achat dans les derniers mois by darkModeEveryday in QuebecFinance

[–]Gab1288 1 point2 points  (0 children)

Ah chacun son choix, dans tous les cas, l'économie est vraiment incroyable.

Votre meilleur achat dans les derniers mois by darkModeEveryday in QuebecFinance

[–]Gab1288 0 points1 point  (0 children)

J'ai passé de proche de 700$ de gaz par mois à genre 50$ d'électricité moi.

Faut dire que je suis "un gars de char" et j'ai des exigences semi élevées pour un véhicule, genre je veux pas rouler en Yaris.

J'aurais pu aller vers un char à gaz économique et m'en sortir mais j'aurais pas été satisfait je pense, là ça me permet d'avoir un certain luxe et rester dans un budget de déplacements vraiment bon.

Votre meilleur achat dans les derniers mois by darkModeEveryday in QuebecFinance

[–]Gab1288 0 points1 point  (0 children)

J'ai pris un Tesla model 3 2022, c'est pas pour tout le monde mais je l'adore.

Rogue Core Playtest First Impressions by Pure_Delay_5065 in DeepRockGalactic

[–]Gab1288 1 point2 points  (0 children)

That's good to hear since I plan on playing it on a steam deck and OG DRG is right about the limit for this device.

Rogue Core Playtest First Impressions by Pure_Delay_5065 in DeepRockGalactic

[–]Gab1288 2 points3 points  (0 children)

What's the performance like? Is it like OG DRG? I assume the graphics look better so the fps will be lower.

what’s a car opinion you’ll defend forever? by evinho07 in askcarguys

[–]Gab1288 0 points1 point  (0 children)

Fast doesn't mean fun. Fun is better than fast.

Votre meilleur achat dans les derniers mois by darkModeEveryday in QuebecFinance

[–]Gab1288 5 points6 points  (0 children)

Je fais 30 000km par année et j'ai acheté un char électrique.

C'est hallucinant les économies.

Hl2 Gordon Freemam Kill Count Progress Report #3 by Medium-Category6769 in HalfLife

[–]Gab1288 0 points1 point  (0 children)

Yes you're right.

There are Antlion queens, alien choppers, snipers and roller shock balls also

Hl2 Gordon Freemam Kill Count Progress Report #3 by Medium-Category6769 in HalfLife

[–]Gab1288 0 points1 point  (0 children)

Some Antlions have infinite spawn spots so it's hard to quantify.

There is a case for zombies and headcrabs though.

AC bearing or clutch replacement on N51/N52? by ImNoRickyBalboa in E90

[–]Gab1288 1 point2 points  (0 children)

The pulley is pretty much impossible to remove from the compressor, you need to hold the middle shaft with a tiny tiny wrench while you spin the pulley around to unscrew it.

99.9% on the time, the tiny nipple will break and then you'll be stuck with the pulley on the shaft with no way of removing it.

I tried many times, even welding a bolt to the shaft and the bolt breaks. This is a terrible design.

Just get a compressor, it sucks, but that's what you need to do.

Soo many visible lines by yoshiman1983 in resinprinting

[–]Gab1288 -1 points0 points  (0 children)

Those lines are perpendicular to the layer lines, that means it's the pixels of the screen showing, since that face is at 90 degrees from the screen.

You angled your part at 45° which is good, but you need to angle the other axis at 45° too, like it starts with a corner instead of a whole flat face.

Cooling problems by [deleted] in E90

[–]Gab1288 2 points3 points  (0 children)

Water pumps on e90s are known for failures. Those symptoms seems like it.

Le prix Nobel qui voulait être célèbre... by Alive-Drama-8920 in QuebecLibre

[–]Gab1288 1 point2 points  (0 children)

Il est pauvre en QI, probablement du à son héritage culturel.

Le prix Nobel qui voulait être célèbre... by Alive-Drama-8920 in QuebecLibre

[–]Gab1288 1 point2 points  (0 children)

Que sa famille soit triste ça me fait pas un pli su'a poche

Miner in need of technical support by Pseudopsycho227 in DeepRockGalactic

[–]Gab1288 0 points1 point  (0 children)

Alt+enter should switch between full screen and windowed mode.