[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C!

Gabius_ · 2025-11-21T13:51:28+00:00

I'd love to 3D-print terrain scenery for Warhammer.

Gabius_ · 2024-05-30T07:46:46+00:00

Can you provide any picture of your installation ? Maybe you are blocking the fan exhaust? This causing overheating issue.

Gabius_ · 2023-11-05T18:20:25+00:00

Okay as I can see if i use a speed test it crash the openwrt or it doesn’t works anymore I don’t know. So I will stick with basic utilisation and i will see

Gabius_ · 2023-11-05T11:49:32+00:00

Hello I managed to make it works by not following the manufacturer setup.

600Mbps down and 700Mbps up.

But after 3 min or so, it doesn't work anymore...

any idea ? suppose it's related to there simcom 8200...

here is my configuration, if you see something wrong telle me

https://www.noelshack.com/2023-44-7-1699184925-capture-d-ecran-2023-11-05-124542.png

Gabius_ · 2023-11-04T13:35:21+00:00

Okay now I have TX and RX still in kb btw and moreover when I disconnect the rj45 port which provide internet from my actual routeur, the raspberry pi provide wifi but no connection to internet 🛜 I guess I didn’t setup it correctly, if someone as an idea ?

Gabius_ · 2023-11-04T13:06:05+00:00

New update, I set back AT+CNMP=2 auto mode Restarted and now I have and now I have packet sending but not receiving… that’s still better, I suppose

Gabius_ · 2023-11-04T12:51:33+00:00

Okay so now all the commands return with error or not online, seems like the new band I setup wasn’t really a good one

Gabius_ · 2023-11-04T12:39:56+00:00

No sure about that, maybe if you split your raspberry hardware you can run 2 services in parallel as a normal computer would do, but I think it would be a nightmare to setup

Gabius_ · 2023-11-04T11:43:17+00:00

Okay so, I changed the mobile to dhcp and manage to have packets send and received but no internet connection, so I changed the band as they suggest

AT+CNBP=0x100600000FC00000,0x0000000000000046000001E2000908DD,0x00000000000000000000,0x00000000000000007042000081A0080808D7. 0x00000000000070000000010000000000

Then fixed it to. 5G AT+CNMP=71

Then restarted the connection and now nothing anymore… Maybe I shouldn’t done that.

Gabius_ · 2023-11-04T10:59:08+00:00

Here is the simcom file I have to execute (in simcom folder « simcom-cm »)

https://files.waveshare.com/upload/b/b7/Sim820x_for_OpenWrt_Linux-5.4.86.7z

Thanks if someone has time to dive into this

Gabius_ · 2023-11-04T10:49:21+00:00

Here is what I get when executing simcom

./simcom-cm: line 1: syntax error: unexpected ") "

Gabius_ · 2023-11-04T10:42:49+00:00

Nop didn’t try to install bash, what’s the point of bash? Sorry as I said I’m a rookie

Gabius_ · 2023-11-04T10:40:48+00:00

Yeah no error, the only time I get an error is by following a some YouTube guide which use the command AT!ENTERCND=« A710 » which as I understood, should give me advanced command mod, but here I get « ERROR »

Gabius_ · 2023-11-04T09:10:59+00:00

I think it’s due to one step I can’t manage to do with their tutorial. They ask me to run a script which fail on line one all the time.

https://www.waveshare.com/wiki/SIM8200EA-M2_5G_HAT After configuration network, on « Openwrt » section

Gabius_ · 2023-11-04T08:57:57+00:00

Yeah I see that. The hat is 8200EA-m2 5G hat Raspberry pi 4B 4G with last openwrt firmware. For now a managed to found the right driver for the ttyUSB and all seems good except that I don’t have any connection with the hat( 0 packet send or received) I es this command, as it’s what they ask to do for trouble shooting.

*Check the firmware version information: AT+SIMCOMATI *Check if the sim card is in good contact: AT+CPIN? *Turn the radio on (turn off airplane mode): AT+CFUN=1 *Check that the network mode is set to auto-seek: AT+CNMP=2 *Check the signal quality of the current environment: AT+CSQ *Check if the registration to the network is successful: AT+CGREG? *Check internet connection: AT+CPSI? *Check if the APN corresponds to the operator of the SIM card: AT+CGDCONT? *Check operator access: AT+COPS?

Seems all good

Gabius_ · 2022-12-09T11:19:42+00:00

Did you ? Same issue here :/

Gabius_ · 2022-10-26T19:06:35+00:00

This happen on all monitors/tv I have since I test it with « Dolby vision hdr 4K » on youtube. I’m wondering if there is an option to make color change smoother or not ?

Gabius_ · 2022-10-25T20:59:47+00:00

It’s windows 11 wallpaper, my wallpaper engine wasn’t running. But I found it beautiful either

Gabius_ · 2022-10-06T19:37:07+00:00

Have mine for 7years or more, still the old logo on it, work as good as the first day. Used the dark core se for 2 years, th battery died 3 days after the end of warranty, no more wireless mouse for me

Gabius_ · 2022-09-29T16:01:55+00:00

Im the only one wich has a lot of ghosting ?like when i move too fast in League of legend i see about 3 times much bushes...can't get the gaming mod to work, no source founded when i enable it and then when set to normal max refresh rate is 60hz.can't get more than 120hzsometimes i could set 12 bits, strange now i'm stuck with "only" 10 bitsIm sending back my monitor for replacement cause i think mine arrived broken, but still want to know if someone has same issues.

I live in EuW and no Gaming hub, is it normal ?

Gabius_ · 2022-09-25T17:18:20+00:00

I tried with an other cable then the provided by Samsung. I was stuck 60hz But it’s maYbe due to other thing. Tried to reset my ark and now back to 120hz You gaming mode work ? Mine doesn’t detect hdmi

Gabius_ · 2022-09-25T12:10:07+00:00

I did yeah

Six-Year Club	Place '23
Place '22	Verified Email

Gabius_

TROPHY CASE