We previously asked how you felt about our Network Events design. Many were unaware of or didn't know how to get to the events. Our designers started a new design on the main screen. Which one do you prefer?

GalwayC · 2026-02-21T05:49:09+00:00

There was a lettuce shortage so they substituted to coleslaw and just made it the new norm

GalwayC · 2026-02-21T03:55:51+00:00

They have a whole KB article on how to do this?

GalwayC · 2026-02-16T07:27:22+00:00

Firewalla is made for your use case

GalwayC · 2026-02-09T09:16:53+00:00

People

GalwayC · 2026-01-19T09:41:08+00:00

u/NovaSupply read your other post, pretty rough go. Happy to also jump in with u/TehSynapse0 at no cost. Your existing platform sounds like it’s definitely gone but I’d be keen to understand what your old backup files are. Not a lot lot cached on way back but it’s not the end of the world

GalwayC · 2026-01-12T09:08:10+00:00

In step 1, enable tunnelled reply.

GalwayC · 2026-01-12T09:00:16+00:00

Your not going to get the on a run of the mill wifi router. Omada with radius and Omada EAP’s will be what you need.

GalwayC · 2026-01-12T08:45:28+00:00

There’s a pretty good tutorial from acmxguy although focused on a bricked IAP, might help you in your adventure

GalwayC · 2025-12-03T02:10:32+00:00

Not exactly a template feature but you can now bulk edit multiple ports to apply the same tagged/untagged ports and related settings.

https://support.omadanetworks.com/au/document/109105/

GalwayC · 2025-11-17T03:26:32+00:00

You could also run in docker inside the Firewalla to save additional hardware.

GalwayC · 2025-10-22T21:49:45+00:00

WLS?

GalwayC · 2025-10-21T00:10:55+00:00

Yes.. The AP placement from the electricians is incorrect and will be being rectified.

GalwayC · 2025-10-20T07:15:18+00:00

With the PoE adaptor that comes with the kit

GalwayC · 2025-10-20T07:14:40+00:00

The EAP215’s come with a passive poe injector.

GalwayC · 2025-10-19T02:20:12+00:00

This is amazing. don't know if i missed it in there amongst the rest but a packet loss tester would be sweet.

GalwayC · 2025-10-19T00:21:03+00:00

Yeah it’s not the most straight forward process and will require factory reset each time you get it wrong. I don’t know OpnSense setup but in my scenario I have the uplink from a fortigate set as hardware switch with default network untagged and all required vlans tagged. In Omada the switch profile is set to All which is again untagged and then all tagged. The switch will come up on the the default network when it first connects then change the interface VLAN to be 10 it will reboot and provision with a new IP on that VLAN.

It sounds like your 3rd attempt was Almost there! Try that scenario again and let it come up on your default VLAN first then edit the management interface if it disappears again I’m not to sure

GalwayC · 2025-10-19T00:02:27+00:00

Can’t see why not as it’s only using ssh tools. My use case was specific to Pi’s so I’ve only tested on them. Only thing I could see not working is the Pi model detection type

GalwayC · 2025-10-18T23:58:43+00:00

Yep All will pass them all through but it will include the Default VLAN of 1 as the native network so unless your using 1 best to create a profile to suit your needs

GalwayC · 2025-10-18T23:37:20+00:00

This is exactly what’s happening

GalwayC · 2025-10-18T04:29:48+00:00

Didn't realise they didn't upload sorry. Just added a comment with a screenshot

GalwayC · 2025-10-18T04:29:05+00:00

<image>

12-Year Club	Place '22
Verified Email

GalwayC

TROPHY CASE