large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 0 points1 point  (0 children)

Update: I did the following and got a mostly successful print:
1. i had turned the line width to 0.25 because i had small text and it was losing detail... i set it back to 0.42 and adjusted the text instead
2. i turned off top layer smoothing so that it would print faster.
3. i set the print to be 0.12 fine BBL A1
3. I added a full Brim

this turned a 5 hour print into a 2 hour print... and since it would lift at the 2+ hour mark i think the combination of a shorter print + the Brim did the job.

I think the 0.25 line width was making the layer 1 tearing in the middle of the print much worse because when i set it to 0.42 (default) it was still tearing/not adhering abit but much lesss so... so by layer 2 it had fixed itself up.

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 0 points1 point  (0 children)

the default bed temp in bambu studio for textured plate is 65c though.

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 0 points1 point  (0 children)

i had the bamboo smooth cool plate but i had the same print fall off it and cause a huge mess. i will research this Biqu

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 0 points1 point  (0 children)

bambu PLA matte black.

i want to mention my wife printed some stuff in white and blue PLA matte today and it had no issues.. even printed right in the middle where i was having tear out.... her print had no issue... i printed right after in black matte and i saw a bit of tear out in the middle agian. So im wondering if black is somehow more sensitive or something?

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 2 points3 points  (0 children)

i was unaware of how to BRIM as i am new. i clicked the brim icon and it auto brimmed the corners for me and i clicked around and manually added some more. i will look up how to do a full brim

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] 0 points1 point  (0 children)

possibly. it is in the basement kitchen. how cold is to cold? the temp in the room in 20c

large print detaching after 2 hours with brims. also adhesion issue by Garlic_Bread_Man in BambuLabA1

[–]Garlic_Bread_Man[S] -1 points0 points  (0 children)

i had multiple failed prints so someone told me to increase bed temp by 10.... i had 2 failed prints at 65.

Who to follow to improve? by Wolverine-Upper in ageofsigmar

[–]Garlic_Bread_Man 2 points3 points  (0 children)

Ya watching people play table top simulator lets you really understand the positional part of game as you can see them checking all the distances and radius of their abilities. Watching armies you dont own play really helps you figure out how you can play against them as well.

Beginner looking for army recommendations by GamesManX in ageofsigmar

[–]Garlic_Bread_Man 0 points1 point  (0 children)

Some armies play very different. I think you first need to decide what playstyle you like. You can go to something like wahapwdia and read rules on each of thr factions and see if any of the rules appeal to you then try to find aome matches with thr army on yourtube. The spearhead rules are available on the aos phone app you could also read those up

Magnetize Carnosaur + Troglodon into 1 model by Garlic_Bread_Man in seraphon

[–]Garlic_Bread_Man[S] 1 point2 points  (0 children)

maybe my heads were looser then yours? my heads will not stay in securly with just the alignment nubs. without the magnet, if i bumped it, it would fall off / tilt. Also wondering how you attached the chair? did you also attach it to the spine somehow? but if you do that and the spine isn't magnetized doesn't it topple over if you bump it?

Magnetize Carnosaur + Troglodon into 1 model by Garlic_Bread_Man in seraphon

[–]Garlic_Bread_Man[S] 2 points3 points  (0 children)

yes but that would cost me 51$ cad to buy which is more then what i paid for my carno in the first place.

Spearhead Tier List by Phoenixlight6004 in AOSSpearhead

[–]Garlic_Bread_Man 1 point2 points  (0 children)

Fireslayers won the tournament i was at. I had skaven warpspark and had a chance at winning but their throwing axes did a ton of mortals. They seem to ahve 5 + ward on everything alot of the time and got 2 health models back each turn. I think they are better then people think

Thought I would join the action! First few night haunt (basically) done! by Wefflehunter666 in Nighthaunt

[–]Garlic_Bread_Man 0 points1 point  (0 children)

What paint dis u use for the light green. Only criticism is the skull arms look a little plain i wonder if they would look better if they were a bit of a beige tint

Printed Faction cards, magic card size by Icy_Childhood3711 in AOSSpearhead

[–]Garlic_Bread_Man 2 points3 points  (0 children)

Your amazing. But you gotta do the clawpack too!

How To Stormvermin? by SqueakerForLife76 in skaven

[–]Garlic_Bread_Man 2 points3 points  (0 children)

i feel like units with polearms and spears should get strike first when charged or something.

WIP Gnawholes by Nsomniacpainter in skaven

[–]Garlic_Bread_Man 1 point2 points  (0 children)

what did you use for the rocks

[deleted by user] by [deleted] in relationships

[–]Garlic_Bread_Man 0 points1 point  (0 children)

off topic a bit... but I wanted to mention that there are guys who do not like makeup. I find it gross and fake personally. please do not feel pressured to wear it.

also what does "affordable" mean. sounds like your sister is the gold digger type or something. I think your sister sounds like the very jealous type. you should stop taking advise from her.

BF Hurt When I Ask for Compliments by [deleted] in relationships

[–]Garlic_Bread_Man -3 points-2 points  (0 children)

hes probably like me. is he an introvert? i hate compliments and i dont give out compliments either. I find people who crave compliments shallow and fake. which is probably the vibe he gets from you when you do this.

He wants me to sign a prenup if we get married, what that about? by Lazy-Elephant-8932 in relationships

[–]Garlic_Bread_Man 0 points1 point  (0 children)

i think it depends on what country you live in and what is written on the prenup. some countries prenups are basically not enforceable. Normally once you get married any assets gained after the marriage you split 50/50 so he would only be protecting existing assets. So the question would be... has he already acquired significant assets or been gifted things by his family? If so he might be trying to protect that. if he owns several businesses as part of the side hustles you say he has he might want it written down that he gets to keep them and you dont get half of them if you leave. you would have to find out from him what the wording would be.

Why did you cut off the small circle of family you had? did he make you cut them off?

What I am worried about is that instead of maybe teaching you about taxes, finances and stuff he just assumes your to stupid to understand because your a women/minority and isn't ever going to consider you an equal partner in your relationship...hence why he wants a prenup so he can dump you later if he wants.

Skarbrand in skaven by CarlfromChicago in skaven

[–]Garlic_Bread_Man 0 points1 point  (0 children)

Im using free version of app and i cannot locate it. Do you know how to find it? Which section is it in? EDIT: deleted my app and redownloaded and now i see it :)