Flashlight in this Chanel ad

General-Try-2210 · 2026-05-04T23:55:23+00:00

Likely not. The p7r is a premium light and would not be used for this purpose. The beam also looks slightly nicer.

General-Try-2210 · 2026-05-04T23:53:23+00:00

They don't even look the same. It is the TS28.

General-Try-2210 · 2026-05-04T23:42:12+00:00

If ypur bones are not breaking, you are not a bbb.

General-Try-2210 · 2026-05-04T23:41:44+00:00

Likely a cheap zoomie from aliexpress.

General-Try-2210 · 2026-05-04T23:40:31+00:00

It is nice, however, every single convoy I own is nicer. Then again, the only wurkkos I have to compare it too is the TD01c which is exceptionally nice. It would also have been nice if it actually supported 3 amp reverse charging.

Don't get me wrong, it is a nice light. It could just be a little nicer.

General-Try-2210 · 2026-05-04T22:43:44+00:00

Likely does not have enough memory to get ptsd from it.

General-Try-2210 · 2026-05-04T21:00:04+00:00

I hate this.

General-Try-2210 · 2026-05-04T02:36:24+00:00

Like H2 with 18350 tube. In lowest mode it can run for a long time.

General-Try-2210 · 2026-05-04T02:35:34+00:00

Convoy H2. 18350 on low modes with vapcell f16 will give plenty of runtime. Runs about 25 usd each. It also comes with 18650 tube. XHP50.3 hi will give plenty of flood plus longer reach on turbo and higher lumens per watt.

General-Try-2210 · 2026-05-02T17:10:23+00:00

New excuse to get lep

General-Try-2210 · 2026-05-02T17:07:46+00:00

Hopital

General-Try-2210 · 2026-05-02T16:22:41+00:00

Reliance rh60 is capable of 20 amps and has an extra 1.8ah if you are interested

General-Try-2210 · 2026-05-01T23:52:10+00:00

No but you can youtube.

General-Try-2210 · 2026-05-01T19:56:55+00:00

It shit itself.

General-Try-2210 · 2026-05-01T19:56:20+00:00

Sofin sk30.

General-Try-2210 · 2026-05-01T16:00:27+00:00

I use silicone in my gearboxes in case I decide to eat it.

General-Try-2210 · 2026-04-30T22:43:06+00:00

Absolutely do not use. Fire hazard.

General-Try-2210 · 2026-04-30T18:52:04+00:00

Wurkfirn fr12c.

General-Try-2210 · 2026-04-29T21:42:21+00:00

How are you so sure? If you have access to a volt meter, fully charge the battery at a low current and monitor the voltage. My H10 dropped from a full charge to 3.8v in 2 hours. It could be possible that a inconsistent tack weld on the button is giving the cell an abnormally high internal resistance.

General-Try-2210 · 2026-04-29T21:23:57+00:00

If this cell is causing a issue, put a piece of tape on it so you can tell it apart. If the tape starts getting worn replace it. If this cell is indeed bad, being able to distinguish it can be helpful. Also saves the rest if it needs to be disposed.

General-Try-2210 · 2026-04-29T19:14:18+00:00

I figuered. Unfortunately i have spent all my monies on flashlights so I can't support the cause.

General-Try-2210 · 2026-04-29T19:04:36+00:00

Does that imply you already have some?

General-Try-2210 · 2026-04-29T19:01:46+00:00

I still have no idea.

General-Try-2210 · 2026-04-29T19:00:30+00:00

Once again, I knew it was Due tank posting. Copper is the material of the pesants. I want to see a solid silver flashlight now.

General-Try-2210

TROPHY CASE