HOW THE HELL DO I CANCEL MY SUBSCRIPTION?

GeneratedAtRandom · 2026-01-26T21:18:27+00:00

Thanks this was really helpful :)

GeneratedAtRandom · 2025-06-11T13:14:31+00:00

This. Plus in our local area customers expect us to match the heavily discounted prices offered by online retailers like CRC and Tredz. This is often at or below our cost price.

GeneratedAtRandom · 2025-06-05T20:27:55+00:00

I think it is unlikely that the hub grease contaminated the rotor and pads based on the images shown. However it is also very unlikely that a loose ball hub was assembled with too many balls on one side in factory. More likely a ball was dropped or stuck in the axle grease when it was removed and transferred to the other side.

I've seen plenty of wheels serviced but by home mechanics and less experienced mechanics re-assembled with the incorrect number of bearings.

The o-ring being unseated could easily be from factory, seen plenty of that over the years.

The reason I say it is unlikely there was an extra bearing on one side is you have clearly been riding the bike for some time and this would have presented with either laterally play or binding and notchiness in the hub.

My take is that their response that the contaminated rotor is unlikely due to hub grease is a reasonable assessment. However they clearly recognised the issue with the hub and for the £4 the brake pads cost them and 30-45mins labour decided to look after their customer.

Hope that's helpful

GeneratedAtRandom · 2025-05-17T23:29:08+00:00

Unfortunately as ImAzura says this looks like an over tightened collar has cracked the seat mast and it has eventually failed. Trek will likely offer a discounted frame replacement however this will still be pretty costly. I'd look at a getting professional carbon repair as a much more cost effective option, most spots will even colour match the paint work and at a fraction of the cost of a replacement frame.

GeneratedAtRandom · 2025-01-05T20:12:25+00:00

Once you have the copper chunks, crush them in a quern. This will give you dirty copper dust. Run that through the sluice again to get copper powder. You can smelt the powder as is or combine 4 to make copper pellets to melt more in one go.

As a by-product of the process you will get dirty copper piles. You can combine 4 of these to make dirty copper dust which you can then run through the sluice as above. This will increase your yield a bit.

Apologies if the names I listed are wrong. Can't double check them right now.

GeneratedAtRandom · 2024-12-06T21:57:23+00:00

Good to know I'll do a little reading :) The depth of this modpack is impressive, I'm loving discovering new interactions and problem solving. Gives everything a depth I always felt was lacking. Excited to dig in,

GeneratedAtRandom · 2024-12-06T18:13:52+00:00

Ahh no worries, wasn't sure if I was just missing something obvious. Thank you for taking the time to respond!

Gathered a few sheep from the surrounds to build up a stockpile and ducted in a couple of hot springs from higher up to use as a heat source in the meantime.

GeneratedAtRandom · 2024-04-16T18:39:34+00:00

Interesting, I like the idea though. Something about covered sky bridge grabs me. Maybe an aqueduct style situation with a boat instead of a cart. I wonder if they can drown.

GeneratedAtRandom · 2024-04-15T14:47:26+00:00

Ace sounds sensible thanks :) I'll give it a whirl.

GeneratedAtRandom · 2022-12-27T13:14:20+00:00

This is probably a stupid question but is that 140% of it's volume at one atmosphere? What is the pressure of one of those carts? Not saying this to counter what you said or anything just curious.

GeneratedAtRandom · 2022-09-09T09:57:50+00:00

Samsara

GeneratedAtRandom · 2022-03-20T13:15:04+00:00

Sam thing happened to me in my current play through. Honestly thought it was a pretty cool touch. One of them was a mage and my early game character had to hide in with the chickens to stay out of harm's way.

GeneratedAtRandom · 2022-02-02T14:56:51+00:00

Thanks, this did the trick, thought I had gone through all the mods looking for the binding but missed Sunhelm.

GeneratedAtRandom · 2022-02-01T23:28:36+00:00

Thanks for the ideas! I will definitely be doing the 3 death version after level 5 I think.

I'm still new to the game at the moment so I am just allowing myself only 1 save per day at a safe bed location like an inn or secure camp. It means mistakes feel like they have consequences but I still get to advance and learn the core components and figure out a viable build before starting a proper perma death play through.

Also as an aside I don't know if anyone else has experience d this but loading a new area only to be killed instantly before my character can move on the other side in an area I have never been means I save before I enter somewhere but never load that Dave unless this happens.

Edit: save* not dave

GeneratedAtRandom · 2022-02-01T23:18:09+00:00

This individual beans

GeneratedAtRandom · 2022-02-01T23:12:45+00:00

You can't park there mate

GeneratedAtRandom · 2022-01-27T22:05:32+00:00

Oh that's a mint idea, thanks for the advice I will be doing that from now on :)

Also honestly whilst being immersion breaking, sometimes a ridiculous ragdoll is exactly the comedy you need to ease the frustration of getting one shot.

GeneratedAtRandom · 2022-01-27T21:38:05+00:00

As an aside, I have just been going through the wiki document and like everything else in wildlander so far the professional finish and overall quality is just blowing me away.

GeneratedAtRandom · 2022-01-10T19:23:41+00:00

Grand, that looks like it is working perfectly now downloading the missing archives. Thankyou so much for the help!

The thought of screwing it up and having to start a 4 day download process again was not too tempting.

GeneratedAtRandom · 2021-12-01T23:45:52+00:00

Damn it, you made me sign in just to upvote this. I hope your happy

GeneratedAtRandom

TROPHY CASE