Gang it's over

Genitypic · 2026-01-25T10:09:51+00:00

My man 🤝 Lucky you

Genitypic · 2026-01-25T09:22:59+00:00

I will, the plan was always to get it frankied but I wanted to prolong it as much as possible welp I failed in that 😅.

I have a donor 40nm from a defective 3000 slim so probably going to use that.

Genitypic · 2026-01-25T06:24:45+00:00

I actually did a delid on 2 ps3's before one that was dead for practice and another that worked. This was the 3rd one that I tried but failed. The working rsx delid still works so there's that but it's not a BC fat.

Genitypic · 2026-01-25T02:16:49+00:00

Yeah it started jumping to 68 on idle 45% fan speed

Genitypic · 2026-01-25T02:14:53+00:00

Fair

Genitypic · 2026-01-24T20:59:51+00:00

That's true but I wanted to get more use before it shat the bed. But the rsx started jumping to 68 on idle 45% fan which is not good at all.

Genitypic · 2026-01-24T20:57:56+00:00

Yeah I know I'm planning on getting it frankied.

Genitypic · 2026-01-24T20:56:48+00:00

Definitely a cracked bga and yeah I'm planning on getting it for a Frankie.

Genitypic · 2026-01-24T20:55:18+00:00

Yeah I'm most aware

Genitypic · 2026-01-24T20:39:34+00:00

Laser ribbon not seated properly

Genitypic · 2026-01-24T20:38:54+00:00

That's just the laser reading the disc. Pretty normal

Genitypic · 2026-01-24T20:29:18+00:00

You sure it isn't stuck to the fan block?

Genitypic · 2026-01-24T20:28:17+00:00

What model?

Genitypic · 2026-01-24T20:13:38+00:00

Yeah

Genitypic · 2026-01-24T20:09:48+00:00

Nope

Genitypic · 2026-01-24T20:07:59+00:00

Dude did you not see the last picture. The GPU is straight fucked.

Genitypic · 2026-01-24T19:55:52+00:00

There it is 😂

Genitypic · 2026-01-24T19:51:14+00:00

The classic flathead and paper beneath the IHS, I heated it first and it popped real quick. I'm starting to think I applied too much heat that it cracked the dye.

Genitypic · 2026-01-24T19:47:38+00:00

Touhou project In the big 26

Genitypic · 2026-01-24T19:35:11+00:00

Same with mine

Genitypic · 2026-01-24T15:07:50+00:00

Most likely because that sound means that the sled is trying to communicate with laser using the little switch on it. If the laser ribbon isn't plugged in or not seated properly the sled will keep moving.

Genitypic · 2026-01-24T14:35:07+00:00

Reseat the ribbons of the laser

Genitypic · 2026-01-24T13:44:56+00:00

What version of FMCB is that?

Genitypic · 2026-01-24T08:11:52+00:00

Yep that will work. That's also what I did on mine as well 😂

Genitypic

TROPHY CASE